01-18-2008, 09:22 PM | #1 |
Registered User
Join Date: Sep 2006
Location: st pete
Posts: 404
|
power windows
anyone ever put power door and power windows into there manul lock and window trucks??
i can't see it being to too crazy
__________________
_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_- 1972 K10 4"lift 33"tires (soon to be bigger and better) 2000 silverado 1500 2wd 2"coil spacers3" BL 285/75/16's |
01-26-2008, 02:46 PM | #2 |
Registered User
Join Date: Feb 2001
Location: Wetumpka, Al, U.S.
Posts: 8,891
|
Re: power windows
I did an 03 truck for a buddy! I used stock replacement motor/regulators and used a 3 switch aftermarket switch kit. I prefer nicer Dei door lock actuators and just a keyless entry for the locks!
__________________
Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole! |
01-26-2008, 09:08 PM | #3 |
Registered User
Join Date: Sep 2006
Location: st pete
Posts: 404
|
Re: power windows
was it pre wired? for locks and windows could i swap in factory locks too
__________________
_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_- 1972 K10 4"lift 33"tires (soon to be bigger and better) 2000 silverado 1500 2wd 2"coil spacers3" BL 285/75/16's |
01-26-2008, 09:13 PM | #4 |
Registered User
Join Date: Feb 2001
Location: Wetumpka, Al, U.S.
Posts: 8,891
|
Re: power windows
no it is not prewired. What year truck is it?
__________________
Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole! |
01-26-2008, 10:09 PM | #5 |
Registered User
Join Date: Jan 2008
Location: Groves,TX
Posts: 483
|
Re: power windows
a guy i worked with did this on a 04 chevy, he said it was relativaly strait forward, he said he had to run 3 wires to the driver side door and then from there all the way to the pass side door........... oh yea, he said it was one of those kits that had a box that fit over the manual crank shaft.
|
01-27-2008, 10:07 AM | #6 |
Registered User
Join Date: Sep 2006
Location: st pete
Posts: 404
|
Re: power windows
mine is 2000 and i want factory look too
__________________
_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_- 1972 K10 4"lift 33"tires (soon to be bigger and better) 2000 silverado 1500 2wd 2"coil spacers3" BL 285/75/16's |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|