Jack Decal...Who Has Them? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

stllookn · 01-29-2008, 04:46 AM

I am looking for the jack decal that is placed in the '67-'68 bucket console box. Some vendor must reproduce these.

stllookn · 01-29-2008, 04:48 AM

Here's a better pic...only slightly...LOL!

Castiron9 · 01-29-2008, 05:15 AM

Maybe????????http://www.classicindustries.com/pdf...ems&Decals.pdf...pg. 236

Slammed70 · 01-29-2008, 05:43 AM

"Jacking instructions"

71 super · 01-29-2008, 06:15 AM

The only ones that I have seen were date coded 1969 like the temp. decal on the core support. If you had an original maybe Jeff could make one for you??? I know you are looking for 100 pt restore but this maybe one of those parts you can get away with using the later model but in the correct location. In my experience, most of the people who judge have no clue as to what is correct on these trucks, but that is a whole other tangent.

**too much stuff** · 01-29-2008, 06:41 AM

Maybe a better pic for you. I have seen them mounted inside the buddy box, and on the seat brackets. I don't know what determined where it went. Good luck with your search, Eric

Guy58 · 01-29-2008, 08:31 AM

I do not know if this is what you are looking for but 'www.americanclassic.com' has a 67-72 jacking instruction decal,
part #DEC-32 for $1.75.
Guy

stllookn · 01-29-2008, 12:25 PM

OK...both my seats are buddy buckets from 1967 but going into 1968 trucks. One has the decal in the buddy box and the other does not have the decal that I can tell. I wonder if the decal was placed a different place in 1968? I will check the restoration guide I guess. I want this to be PERFECT...no point deductions...LOL!

Thanks for your help!!!!!!!!!!

72BlckButy · 01-29-2008, 12:41 PM

I would say check with....

Classic Parts of America

piecesparts · 01-29-2008, 01:14 PM

In this case, I don't know Jack. sorry.....lol

SunTzu · 01-29-2008, 01:50 PM

Found this at brother's

http://www.brotherstrucks.com/prodin...number=DCMG872

70GMCer · 01-29-2008, 09:16 PM

Here's a copy. What I was going to do was take a piece of glue backed paper and print it on there. Cut it out and be done....

Guy58 · 01-29-2008, 10:34 PM

stllookn,

Guy58 · 01-29-2008, 10:40 PM

stllookn,
In one of your replies you mention a restoration guide. I am looking for a good restoration guide for my 1967 C10 project truck. Do you know of a good one I would benifit from?
Thanks,
Guy

63 & 64 Bowties · 01-29-2008, 11:22 PM

Quote:

Originally Posted by 70GMCer

Here's a copy. What I was going to do was take a piece of glue backed paper and print it on there. Cut it out and be done....

I've seen that done with UPS shipping labels if you have access to them.

stllookn · 01-30-2008, 01:17 AM

HTML Code:

I've seen that done with UPS shipping labels if you have access to them.

I might have to give that a try. For $1.99 though...I am going to order one to see what they look like. I will use the best one.

Guy58, I have been using (trying to use) the 1967-1972 CHEV/GMC TRUCK FACTORY ASSEMBLY MANUAL. I purchsed this on-line and find it about the worst and most difficult reference guide EVER!!!!!! However...it is about the only thing I have found. I provides locations for all pieces of trim, mounting holes, emblems. It shows how the drip rails are folded and bent in cross-section so you can tell which panel goes where...GREAT MATERIAL...but it is laid out completely in random order without an index or reference which makes it very frustrating to use. What could be worse...THERE ARE NO PAGE NUMBERS...ROFLMAO!!!!!!!! Sometimes I think it is faster to find an original truck and look at where some things are supposed to go. Mine has "post-it" notes all over it.

Sorrry for the rant...great info...you just have to find it. This guide is about 2.5" thick...lots of pages.

stllookn · 01-30-2008, 02:03 AM

It took me 50 minutes to find where the jacking instructions are to be located inside the buddy bucket seat box this morning. There is one additional decal that goes in there...a Warning decal located 5.00 inches from the inside front of the box, below the "Jacking Instructions". Something else shown in the assembly guide is seat belt holders mounted to the front of the buddy bucket box. Very interesting since I have never seen that option on any of the trucks so far. These are not on my '67 buckets. I might have to start another thread on this one.

71 super · 01-30-2008, 02:17 AM

All buckets not just the buddy buckets got the jack instructions in the console. The other sticker is only there if the truck was equiped with posi. If open rear no second sticker. The stickers you are looking for are not the same as the ones reproduced. I "believe" the correct jacking instructions for your truck would be closer to 66 down models. All of the ones from suppliers are basically the same- look to pay from $2.50 -$4.00

chipflyer · 01-30-2008, 03:39 AM

LMC also sells the style that 70gmcer has shown. I have never seen a source of the early style label with the bowties in the upper corners. I would like to duplicate tht one someday but don't know when I will ever get to it.

Jeff

stllookn · 01-30-2008, 04:54 AM

Quote:

The other sticker is only there if the truck was equiped with posi. If open rear no second sticker. The stickers you are looking for are not the same as the ones reproduced. I "believe" the correct jacking instructions for your truck would be closer to 66 down models.

OK Houston...now we have a problem! Does anyone have a set of buddy buckets with the correct "Jacking" instructions so I can make sure I get this right? Mine was so badly damaged that I could not detemine what it was originally. As for the Posi-warning...mine did not have one...I will try to look it up on one of the decal sites.

**too much stuff** · 01-30-2008, 08:26 AM

Mine were original with the sticker on the pass side as shown. My 71 cheyenne has the posi warning sticker in the pass cab corner, but not a bucket seat truck. I think i pulled those buddy buckets from a gmc if it makes a difference. I can look at my other set and see if there is still a sticker on them. Now are you confused???

jay_shy · 01-30-2008, 09:26 AM

Let me see if I can resize the picture to post it.

Jason

jay_shy · 01-30-2008, 09:46 AM

Here is a picture of my center console.

jay_shy · 01-30-2008, 09:54 AM

Here is a close up of the sticker.
I'm still learning how the photo size resize thing works.
Jason

LUV2XCLR8 · 01-30-2008, 10:03 AM

All I got is the Blazer / Jimmy version, sorry

01-29-2008, 04:46 AM	#1
stllookn Saving 1 truck at a time! Join Date: Aug 2001 Location: Kent, WA Posts: 6,465	Jack Decal...Who Has Them? I am looking for the jack decal that is placed in the '67-'68 bucket console box. Some vendor must reproduce these. Attached Images __________________ '68 C20 Longhorn 50th Anniversary 400/TH400 '68 C20 Longhorn 50th Anniversary 468/TH400w/buckets '72 C20 Halfhorn (Longhorn w/o cab and front clip) '69 Flxible Cruiser (look up ugly in the dictionary)

01-29-2008, 04:48 AM	#2
stllookn Saving 1 truck at a time! Join Date: Aug 2001 Location: Kent, WA Posts: 6,465	Re: Jack Decal...Who Has Them? Here's a better pic...only slightly...LOL! Attached Images __________________ '68 C20 Longhorn 50th Anniversary 400/TH400 '68 C20 Longhorn 50th Anniversary 468/TH400w/buckets '72 C20 Halfhorn (Longhorn w/o cab and front clip) '69 Flxible Cruiser (look up ugly in the dictionary)

01-29-2008, 05:15 AM	#3
Castiron9 72 LONGHORN OWNER Join Date: Sep 2002 Location: Seattle Wash. Posts: 963	Re: Jack Decal...Who Has Them? Maybe????????http://www.classicindustries.com/pdf...ems&Decals.pdf...pg. 236 __________________ 72-SUPER CHEYENNE/20 LONGHORN 70-C/30 DUALLY

01-29-2008, 06:15 AM	#5
71 super Registered User Join Date: Sep 2005 Location: Canton North carolina Posts: 3,081	Re: Jack Decal...Who Has Them? The only ones that I have seen were date coded 1969 like the temp. decal on the core support. If you had an original maybe Jeff could make one for you??? I know you are looking for 100 pt restore but this maybe one of those parts you can get away with using the later model but in the correct location. In my experience, most of the people who judge have no clue as to what is correct on these trucks, but that is a whole other tangent.

01-29-2008, 06:41 AM	#6
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,768	Re: Jack Decal...Who Has Them? Maybe a better pic for you. I have seen them mounted inside the buddy box, and on the seat brackets. I don't know what determined where it went. Good luck with your search, Eric Attached Images __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

01-29-2008, 08:31 AM	#7
Guy58 Registered User Join Date: Oct 2007 Location: Albuquerque, NM Posts: 158	Re: Jack Decal...Who Has Them? I do not know if this is what you are looking for but 'www.americanclassic.com' has a 67-72 jacking instruction decal, part #DEC-32 for $1.75. Guy

01-29-2008, 12:25 PM	#8
stllookn Saving 1 truck at a time! Join Date: Aug 2001 Location: Kent, WA Posts: 6,465	Re: Jack Decal...Who Has Them? OK...both my seats are buddy buckets from 1967 but going into 1968 trucks. One has the decal in the buddy box and the other does not have the decal that I can tell. I wonder if the decal was placed a different place in 1968? I will check the restoration guide I guess. I want this to be PERFECT...no point deductions...LOL! Thanks for your help!!!!!!!!!! __________________ '68 C20 Longhorn 50th Anniversary 400/TH400 '68 C20 Longhorn 50th Anniversary 468/TH400w/buckets '72 C20 Halfhorn (Longhorn w/o cab and front clip) '69 Flxible Cruiser (look up ugly in the dictionary)

01-29-2008, 12:41 PM	#9
72BlckButy Tot Roddin' Join Date: Apr 2005 Location: Mid-MO Posts: 24,461	Re: Jack Decal...Who Has Them? I would say check with.... Classic Parts of America __________________ -Nate 1969 CST SWB - Project Blank Slate (4.5/6" ECE Static Drop, 6-lug disc brake upgrade (manual), Billet Specialties Vintec 20x8.5 255/40 (F) 20x10 295/40 (R), 250 I-6) 1960 AMF Skylark - Tot Roddin' (Lowered with custom frame; soon to include custom push bar and interior) 2008 Silverado CrewCab 1LT (5.3L, 3:73, 4x4, LT1, Z-71, Towing Package)

01-29-2008, 01:14 PM	#10
piecesparts Parts and more parts Join Date: Nov 2003 Location: Lebo, Kansas (middle of nowhere Posts: 6,821	Re: Jack Decal...Who Has Them? In this case, I don't know Jack. sorry.....lol

01-29-2008, 01:50 PM	#11
SunTzu Registered User Join Date: Oct 2007 Location: Denver, Colorado Posts: 28	Re: Jack Decal...Who Has Them? Found this at brother's http://www.brotherstrucks.com/prodin...number=DCMG872

01-29-2008, 09:16 PM	#12
70GMCer Senior Member Join Date: Apr 2005 Location: Joppa, Maryland Posts: 4,408	Re: Jack Decal...Who Has Them? Here's a copy. What I was going to do was take a piece of glue backed paper and print it on there. Cut it out and be done.... Attached Images __________________ 1997 GMC Sierra Ext 1965 Mustang

01-29-2008, 10:34 PM	#13
Guy58 Registered User Join Date: Oct 2007 Location: Albuquerque, NM Posts: 158	Re: Jack Decal...Who Has Them? stllookn,

01-29-2008, 10:40 PM	#14
Guy58 Registered User Join Date: Oct 2007 Location: Albuquerque, NM Posts: 158	Re: Jack Decal...Who Has Them? stllookn, In one of your replies you mention a restoration guide. I am looking for a good restoration guide for my 1967 C10 project truck. Do you know of a good one I would benifit from? Thanks, Guy

01-30-2008, 01:17 AM	#16
stllookn Saving 1 truck at a time! Join Date: Aug 2001 Location: Kent, WA Posts: 6,465	Re: Jack Decal...Who Has Them? HTML Code: I've seen that done with UPS shipping labels if you have access to them. I might have to give that a try. For $1.99 though...I am going to order one to see what they look like. I will use the best one. Guy58, I have been using (trying to use) the 1967-1972 CHEV/GMC TRUCK FACTORY ASSEMBLY MANUAL. I purchsed this on-line and find it about the worst and most difficult reference guide EVER!!!!!! However...it is about the only thing I have found. I provides locations for all pieces of trim, mounting holes, emblems. It shows how the drip rails are folded and bent in cross-section so you can tell which panel goes where...GREAT MATERIAL...but it is laid out completely in random order without an index or reference which makes it very frustrating to use. What could be worse...THERE ARE NO PAGE NUMBERS...ROFLMAO!!!!!!!! Sometimes I think it is faster to find an original truck and look at where some things are supposed to go. Mine has "post-it" notes all over it. Sorrry for the rant...great info...you just have to find it. This guide is about 2.5" thick...lots of pages. __________________ '68 C20 Longhorn 50th Anniversary 400/TH400 '68 C20 Longhorn 50th Anniversary 468/TH400w/buckets '72 C20 Halfhorn (Longhorn w/o cab and front clip) '69 Flxible Cruiser (look up ugly in the dictionary)

01-30-2008, 02:03 AM	#17
stllookn Saving 1 truck at a time! Join Date: Aug 2001 Location: Kent, WA Posts: 6,465	Re: Jack Decal...Who Has Them? It took me 50 minutes to find where the jacking instructions are to be located inside the buddy bucket seat box this morning. There is one additional decal that goes in there...a Warning decal located 5.00 inches from the inside front of the box, below the "Jacking Instructions". Something else shown in the assembly guide is seat belt holders mounted to the front of the buddy bucket box. Very interesting since I have never seen that option on any of the trucks so far. These are not on my '67 buckets. I might have to start another thread on this one. __________________ '68 C20 Longhorn 50th Anniversary 400/TH400 '68 C20 Longhorn 50th Anniversary 468/TH400w/buckets '72 C20 Halfhorn (Longhorn w/o cab and front clip) '69 Flxible Cruiser (look up ugly in the dictionary)



Register or Log In To remove these advertisements.

01-30-2008, 02:17 AM	#18
71 super Registered User Join Date: Sep 2005 Location: Canton North carolina Posts: 3,081	Re: Jack Decal...Who Has Them? All buckets not just the buddy buckets got the jack instructions in the console. The other sticker is only there if the truck was equiped with posi. If open rear no second sticker. The stickers you are looking for are not the same as the ones reproduced. I "believe" the correct jacking instructions for your truck would be closer to 66 down models. All of the ones from suppliers are basically the same- look to pay from $2.50 -$4.00

01-30-2008, 03:39 AM	#19
chipflyer Registered User Join Date: May 2004 Location: Topeka, Ks Posts: 2,293	Re: Jack Decal...Who Has Them? LMC also sells the style that 70gmcer has shown. I have never seen a source of the early style label with the bowties in the upper corners. I would like to duplicate tht one someday but don't know when I will ever get to it. Jeff __________________ I'm not a pessimist, I'm just optimistic that bad things are going to happen. 1971 Cheyenne Super K10 - tilt, cruise, air, am/fm, tow hooks, factory buckets! 1986 Jeep J10 pickup, - 5.3L Vortec with 4L60e and NP241.

01-30-2008, 08:26 AM	#21
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,768	Re: Jack Decal...Who Has Them? Mine were original with the sticker on the pass side as shown. My 71 cheyenne has the posi warning sticker in the pass cab corner, but not a bucket seat truck. I think i pulled those buddy buckets from a gmc if it makes a difference. I can look at my other set and see if there is still a sticker on them. Now are you confused??? __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

01-30-2008, 09:26 AM	#22
jay_shy SWB 4X4 CLUB Join Date: Feb 2005 Location: PA Posts: 1,088	Re: Jack Decal...Who Has Them? Let me see if I can resize the picture to post it. Jason

01-30-2008, 09:46 AM	#23
jay_shy SWB 4X4 CLUB Join Date: Feb 2005 Location: PA Posts: 1,088	Re: Jack Decal...Who Has Them? Here is a picture of my center console. Attached Images

01-30-2008, 09:54 AM	#24
jay_shy SWB 4X4 CLUB Join Date: Feb 2005 Location: PA Posts: 1,088	Re: Jack Decal...Who Has Them? Here is a close up of the sticker. I'm still learning how the photo size resize thing works. Jason Attached Images

01-30-2008, 10:03 AM	#25
LUV2XCLR8 The LuvShack Garage Join Date: Jan 2004 Location: Maple Grove, TN (West Side) Posts: 30,484	Re: Jack Decal...Who Has Them? All I got is the Blazer / Jimmy version, sorry __________________ Owner/Op: "TN Classic Transport Carriers" The Toy: "Square Vette" 72 Hybrid Blazer Toy Barn: "LuvShack" 40 x 60 x 20 Shop Tow Piggy:"Maddy" 88 Silverado 3500 Hauler: "Feathers" 14 Aluma 8218T

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.