Gas tank question - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Shak · 02-13-2008, 09:49 AM

I am considering using either of these tanks for my 67 rebuild. Has anyone ever used them and if so how did the install go. If nobody has used them does anyone have any advise about the tanks or the vendor. This board has been a great source of inspiration for me and I appreciate all the experience and advice I've gotten. I am trying to keep costs down, and I can get either tank for about $215.

http://www.tanksinc.com/index.cfm/pa...rod/prd121.htm

or

http://www.tanksinc.com/index.cfm/pa...prod/prd83.htm

Thanks for the help.

Steve

**Palf70Step** · 02-13-2008, 10:13 AM

I am not a fan of the poly tanks, especially where it is warm. I haver seen and heard of the tanks warping bad. The tank is small your links point too.
You ever think of using the factory Blazer (or blazer replacement) tanks instead?

s95930 · 02-13-2008, 10:25 AM

Found the same site a while ago.

I was considering this tank

http://www.tanksinc.com/index.cfm/pa...rod/prd173.htm

I haven't broke out the measuring tape yet.

lowrollin70gmc · 02-13-2008, 04:11 PM

The rear frame rails are 27.5" apart behind the axle. I'm building my own tank this weekend and that's what one of my design parameters is/was. Hope this helps.

02-13-2008, 09:49 AM	#1
Shak Registered User Join Date: May 2007 Location: Spring Valley, CA Posts: 49	Gas tank question I am considering using either of these tanks for my 67 rebuild. Has anyone ever used them and if so how did the install go. If nobody has used them does anyone have any advise about the tanks or the vendor. This board has been a great source of inspiration for me and I appreciate all the experience and advice I've gotten. I am trying to keep costs down, and I can get either tank for about $215. http://www.tanksinc.com/index.cfm/pa...rod/prd121.htm or http://www.tanksinc.com/index.cfm/pa...prod/prd83.htm Thanks for the help. Steve

02-13-2008, 10:13 AM	#2
Palf70Step State of Confusion! Join Date: Jul 2002 Location: Gulfport, MS USA Posts: 46,897	Re: Gas tank question I am not a fan of the poly tanks, especially where it is warm. I haver seen and heard of the tanks warping bad. The tank is small your links point too. You ever think of using the factory Blazer (or blazer replacement) tanks instead? __________________ Bill 1970 Chevy Custom/10 LWB Fleetside 2010 Toyota Tacoma PreRunner SR5 Double Cab - DD Member of Louisiana Classic Truck Club (LCTC) Bill's Gallery Life isn't tied with a bow, but it's still a gift. Live simply. Love generously. Care deeply. Speak kindly. Leave the rest to God!

02-13-2008, 10:25 AM	#3
s95930 A-Adam A-Adam Join Date: Apr 2003 Location: Sarpy Co. Ne. South of Omaha Posts: 263	Re: Gas tank question Found the same site a while ago. I was considering this tank http://www.tanksinc.com/index.cfm/pa...rod/prd173.htm I haven't broke out the measuring tape yet. __________________ 70 3/4 ton GMC Camper Special

02-13-2008, 04:11 PM	#4
lowrollin70gmc Too many projects Join Date: Mar 2004 Location: Fargo, ND land of the flat hills Posts: 1,147	Re: Gas tank question The rear frame rails are 27.5" apart behind the axle. I'm building my own tank this weekend and that's what one of my design parameters is/was. Hope this helps. __________________ Andrew 84 GMC C1500 SWB 6.2 Diesel/700R4/3.42 "Grandpa's odd duck" 70 GMC C1500 LWB My first truck: shaved, bagged, and more: the lowrollin70gmc 68 K20 Suburban 12V Cummins/NV5600/NP205/D60/11.5AAM 3.73s "Dakota Cadillac" 63 Chevy II Nova Coupe 250 I6/T56/4.56s "Economy car" 53 Willys Wagon 350/NV4500/BW4401/HP D44/9inch “Winter Wagon” 30 Model A 16 Focus ST

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.