Parts For Sale

[Wild83C10]

I have the following parts for sale. All engine parts are used and for a Small Block Chevy.
1. Trick Flow heads-SOLD

2. '74 350 2-bolt long block. It needs a rebuild.
BO

3. '74 355 4-bolt short block assembly. Original 4-bolt block, cast crank and rods, forged pistons. Will include all new bearings. Needs to be assembled. I can help with delivery if within a reasonable distance, just pay for gas.
Machine Shop work:
cleaned
honed
new cam bearings
polished crank
new bearings
new rings
$800 or BO

4. Comp Cams Hydraulic Flat Tappet Cam w/ lifters and springs. Springs are matched to the cam. P/N for the cam is 12-254-3.
Specs: .519 intake lift, .523 exhaust lift, 294 intake duration, 306 exhaust duration at tappet lift. 250, 256 at .050 lift. 110 lobe separation. I have original box and cam card.
$275 or BO, plus shipping

5. Cammotion Hydraulic Roller Cam w/springs, NO lifters. Custom ground cam, Grind Number: X2371-24410-10.
Specs: .580 intake lift, .592 exhaust lift (w/1.6 rockers), 239 intake duration, 247 exhaust duration @ .050 lift. 110 lobe separation. I have original box and cam card.
$275 or BO, Plus shipping


6. Summit 2" Drop Springs. SOLD


7. Hedman Headers. Long Tube Headers for 73-86 Chevy C10 w/SBC. They are in good condition, with black header paint. I painted them before I used them and baked the paint on. The paint looks ok and it has kept the headers in good condition. They have a 3" Flowmaster ball flange collector on the end. The ball flange doesn't require a gasket and works great. I also have an O2 bung in each header (running aftermarket EFI). They are 1-5/8" primaries, no dents or dings. HEDMAN P/N 69090
$60 or BO

Please ask any questions. If you buy multiple items I will make a deal.

Thanks,
Joe

[HavinSomeFun]

I couldnt finf the part # on the web site. are these alum or iron heads?

Trick Flow heads-195cc intake runners, 2.02 intake and 1.60 exhaust valves. Pushrod guide plates, 3/8" rocker arm studs. All original, no port work done. I have more info if you want, just ask. P/N: TFS-31400001. Currently installed are the springs for the Cammotion cam listed below. If you buy one of the cams with the heads I will install the springs for that cam otherwise I will install springs for your cam or original type springs.
$725 or BO plus shipping

[jay6891]

I found a part number of tfs-3040001 that matches his description. 62 cc chambers and aluminum construction. Summit has them listed a 1025.00. Sounds good--- pending how used.

[Wild83C10]

They are aluminum heads. I must have screwed up the P/N somehow. I will double check it when I get home. I'm pretty sure they are 64cc heads, not 62cc. I have the original documents that came with the heads and that has all of the correct information on it.

[HavinSomeFun]

let me know. I am about to build my engine and this would be a nice addition

[70c10]

I'd be interested in the heads if they weren't angle plug heads. My headers only work with straight plug heads

[70rs/ss]

I guess third on the heads and maybe roller cam.

[70rs/ss]

I looked up the second number and it shows an LT1 head? If they are Lt heads they will only fit an LT1 or 4. LMK for sure what they are, picts etc.

[Wild83C10]

Ok just pulled out the documents I got with the heads and the correct P/N is TFS-30400001. They are 64cc heads not 62cc heads. Trick Flow now list this head as TFS-30400001-CNC. The heads are for a gen 1 small block chevy. I had them on the '74 350 listed above. I can take any pictures you want. They are in good condition.
I'm selling everything because I just bought a 383 rotating assembly and I am going with a bigger cam, heads and headers. I actually forgot to list the headers.
Let me know if you have anymore questions.

[sandking]

I may be interested in the heads and headers. How much shipped to 92882?

[toomanytoyz]

6. Summit 2" Drop Springs. Used on '83 Chevy 1/2 ton. Will fit 73-86, maybe 67-72? Powder Coated Blue. P/N: SUM-G727
$50 or BO


PM Sent.............

Rick

[Wild83C10]

Heads are listed on ebay now:
http://cgi.ebay.com/ebaymotors/ws/eB...MESE:IT&ih=019

[Wild83C10]

HEADS are SOLD

[49m]

Id be interested in pics of the headers. Will they work on an 67-72 chevy truck. And would you take $60 shipped

[Longhorn Man]

if rick bails on the springs... let me know the shipping... I am very interested

[Wild83C10]

Springs are sold. Thanks Longhorn!

[64GMCHorsepower]

shipping on the headers to 35806?

Thanks

Chad

[Longhorn Man]

nope... thank you.
The burb will be pimpin!

[Jerblazer72]

I will jump in line on the headers. Let us know where you are at on them. Shipping to 84037. Thanks.

[Longhorn Man]

Thanks for the springs!