The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1960 - 1966 Chevrolet & GMC Pickups Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 02-18-2008, 12:22 AM   #1
buckaneer
Registered User
 
Join Date: Sep 2007
Location: Mobile, AL
Posts: 24
Help with Torque Converter!

Ok, I'm a complete newbie. This is my first truck build. I have a 62 C10 stepside. I have replaced the rear main seal and oil pan gasket on my inline 6. I have the correct fly wheel installed. Now I have an engine, torque converter and 700r4 transmission. I know I need transmission fluid in the torque converter, but how much? Do I install the torque converter to the transmission first or to the flywheel? All help is appreciated.

Thanks
Buck
buckaneer is offline   Reply With Quote
Old 02-18-2008, 02:53 AM   #2
ryan913
Registered User
 
Join Date: Jan 2008
Location: kenton, oh
Posts: 183
Re: Help with Torque Converter!

Here is a web site to help you out. Put the converter in the tranny first and keep spinning the converter clockwise, with a little bit of pressure on the converter, until it seats all the way into the tranny.

http://www.partshp.com/ConverterInstructions.htm

Last edited by ryan913; 02-18-2008 at 02:57 AM.
ryan913 is offline   Reply With Quote
Old 02-18-2008, 05:39 AM   #3
TimE
Hey Y'all!!
 
TimE's Avatar
 
Join Date: Dec 2007
Location: Bay Minette, Alabama
Posts: 1,755
Re: Help with Torque Converter!

Quote:
Originally Posted by ryan913 View Post
Here is a web site to help you out.

http://www.partshp.com/ConverterInstructions.htm
That's a good link Ryan.
TimE is offline   Reply With Quote
Old 02-18-2008, 08:25 AM   #4
greg64
Registered User
 
greg64's Avatar
 
Join Date: Dec 2007
Location: Kimberley, BC, Canada
Posts: 799
Re: Help with Torque Converter!

Then, once the converter is indexed into the pump, mount the tranny to the engine. Then bring the converter forward until it meets the ring gear. One thing I learned the hard way was that the bolts used to hold the converter to the ring gear can bottom out on the converter (if the converter is the style where the holes are tapped and no nuts are used). The bolts I used looked short enough, but they bottomed out and as a result, the ring gear was never firmly clamped to the converter. Led to a horrible vibration which took a long time to sort out.

Once you're ready for fluid, fill up the tranny, then start the engine (which will then fill the converter and cooler). Oh, by the way, make sure your cooler and lines are clear. Don't want old crap ending up in the 700. Once you're looking good on fluid, block the wheels and put it in drive at idle. Then keep checking the fluid level (needs to be level ground). Make sure you get a funnel, because these things take a lot of ATF to fill. Good luck.
__________________
Greg
64 GMC Suburban - 283, NV3500, 14 bolt
77 C10 swb - 292, SM465, 12 bolt
greg64 is offline   Reply With Quote
Old 02-18-2008, 08:55 AM   #5
Chevy Fleetside
Registered User
 
Chevy Fleetside's Avatar
 
Join Date: Sep 2006
Location: San Francisco
Posts: 4,782
Re: Help with Torque Converter!

Acually you can also jack up the rear and put stands under the axle and let the wheels turn. It makes the whole tranny turn and you get the watch the wheels spin..
__________________
"A man and his truck, what a beautiful thing"

65 Short Fleetside BBC
65 Long Fleetside 283 3 on the tree for now.
my build thread http://www.67-72chevytrucks.com/vboa...d.php?t=259536
Chevy Fleetside is offline   Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 04:06 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com