72 Blazer parts vehicle

[Huck]

This is a non driveable blazer parts vehicle I am selling in total for the parts---. 1972, 350V8, 4spd, NP105 transfercase, warn lockouts, front and rear axles, driveshafts, gas tank, power steering, PDB, excellent dash, cluster. It is not complete but there is still a lot there for spare or build--crossmembers, mounts, springs. If I part it out, I will sell the piece parts for a lot more then I am asking for the rolling hulk (current wheels/tires not part of the deal). $625 and I'll load it for you. Huck

[lks dcvn]

Wow - you were right -there is NO body left...

[1972Ryan]

interested, sent pm

[jaros44sr]

If you part, I may be interested in the top of the windshield, depending on condition...J.

[Huck]

Windshield frame has rust ---but you could buy it for $625. and I throw in the rest!!hehehehehe Lots of good stuff here----going on e-bay next week with the single wall hard top!! Here is a picture of the engine compartment with the power steering and long block intact.

[jamie72]

the rare 105 transfercase is worth that..

[Huck]

OH thanks--one freakin didget off on my lousey typing skills and I have to hear about it! Just remember one thing--PAYBACK IS HELL!!! hehehehe

[MrGoodpliers]

DON'T part that Blazer! What a shame... Someone should save her!

[VA72C10]

I would like the power steering pump, bracket, hoses, etc. Needed to swap my non power steering 70 Fleetside 1/2 ton w/ 350 engine. I already have a power steering gear box, but let me know how much that would add shipped cause i grabbed it off a rough truck in a boneyard. Shipping to 23112. Thank you.

[woodridge]

If you part it, I am interestd in the hot air pipe and stove.

[VA72C10]

Can you also tell me what shape the gas tank/wiring/sending unit/brackets are in. If they are in good shape, i would be interested. This would allow me to switch to a tank in the rails and eliminate the tank in the cab, correct? Thanks for your help. Again, shipping would be to 23112. Thanks.

[Huck]

Sorry but no part out at this time. Come take the whole thing!!

[DANTES JIMMY]

Thats Worth Every Dime Wish I Found It Before
Ive Got That Much $$ In Junk Yard Trips
It Will Sell

[Huck]

I will have pictures of it at the Louisville swap meet this weekend and it will be gone one way or the other~~~~.

[Ron 586]

Originally Posted by Huck

This is a non driveable blazer parts vehicle I am selling in total for the parts---. 1972, 350V8, 4spd, NP105 transfercase, warn lockouts, front and rear axles, driveshafts, gas tank, power steering, PDB, excellent dash, cluster. It is not complete but there is still a lot there for spare or build--crossmembers, mounts, springs. If I part it out, I will sell the piece parts for a lot more then I am asking for the rolling hulk (current wheels/tires not part of the deal). $625 and I'll load it for you. Huck

Will the engine start and run long enough to drive it on and off the trailer? I know you want the wheels and tires that are on it but are you going to put some old rollers on it so it can be moved around?

[jamie72]

if huck don`t have any rollers for it i do, now you guys work out the details

[Ron 586]

Originally Posted by jamie72

if huck don`t have any rollers for it i do, now you guys work out the details

Thanks Sir. I need that thing about like a hog needs a side saddle.

[Huck]

got rollers--come quick as it is going to go. you already have 4-5 guys wanting parts from it~~~Huck

[Critter]

You mentioned a single wall top, is it included or was that only for the ebay auction? If so, what is it's condition? Any pics?

[Ron 586]

Originally Posted by Huck

got rollers--come quick as it is going to go. you already have 4-5 guys wanting parts from it~~~Huck

Thanks for answering the 2ed question. Now what about the first one, will it start and run? (I don't care how bad just that it will run , not locked up) I will have to line up a driver as I'm not allowed to drive that far at this time. Getting old is a *****, but it beats the other option.

[Blue_71]

ron, im about 2 hours south of huck. i dunno how far i am from you, but that might help some if we could get it this far

[Huck]

Ron, Sorry--but I understand OLD that's why I forgot the first question or was that the second.??!! Turning 63 and feeling it!!
This blazer started and drove up onto the trailer in 06. I tried to start it last fall but it wouldn't start. it turned over fine, I poured some gas down the carb but no spark so I gave up. I can put some rollers on it and push or winch it up onto any flatbed trailer--no problem. Also have title, Vin plate.

CRITTER--Question re top. I have the original single wall hardtop without hatch--some typical minor concave sections on roof--best interior I've ever seen. $100. take it away.

[Ron 586]

Originally Posted by Huck

Ron, Sorry--but I understand OLD that's why I forgot the first question or was that the second.??!! Turning 63 and feeling it!!
This blazer started and drove up onto the trailer in 06. I tried to start it last fall but it wouldn't start. it turned over fine, I poured some gas down the carb but no spark so I gave up. I can put some rollers on it and push or winch it up onto any flatbed trailer--no problem. Also have title, Vin plate.




CRITTER--Question re top. I have the original single wall hardtop without hatch--some typical minor concave sections on roof--best interior I've ever seen. $100. take it away.

I'll take it. I'll see who I can get to come up with me. I have a winch and as long as it will roll we can load it. Will bring cash and will let you know as soon as I can get up there. Thanks Ron

[Ron 586]

Originally Posted by Blue_71

ron, im about 2 hours south of huck. i dunno how far i am from you, but that might help some if we could get it this far

Thanks Blue 71 but I'll pick it up at Hucks place. See you at Bryan's cookout/meet.

[Huck]

Ron, call me so we can work stuff out--502-321-2094--cell.
I have a Kubota 4x4 tractor with a front loader we can use to push it up onto the trailer--no problem.
Huck