700r4 update - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Tim64 · 03-13-2008, 01:52 PM

Hey Guys,
Well, I've made some progress in getting the tranny ready to go in the truck. I got my servo cover drilled and tapped for the pressure switch. Now I'm working on the speedometer gears. Forgive me if i get the names of these two gears mixed up. I got the (driven gear) in place with no problems, but the (drive gear) is another story. I don't know how to take the old one off the shaft. I could use some help. How does the one on the shaft in the pics come off? Thanks guys I'll post more update pics soon.
Tim

Tim64 · 03-14-2008, 03:08 PM

Now, I find it hard to believe that none of you guys have ever had to remove this ring. I'm thinking some kind of puller might work, but it sure would be nice to hear from someone who has done it.
Thanks,
Tim

**ChiefRocka** · 03-14-2008, 06:03 PM

Yeap, a puller is what I used back in high-school when we use to overhaul trannys.

I just picked an 700R4 for the Chief...it came out of an 89 IROC Camaro.

Can't wait to throw it in...although it won't be for a while.

Later

John

**Chevy Fleetside** · 03-14-2008, 07:22 PM

Give me a hollar if you need some help Chief. I can do it on a weekend when I don't have to watch Luca..

03-13-2008, 01:52 PM	#1
Tim64 Registered User Join Date: Aug 2007 Location: Vandalia, Ohio Posts: 396	700r4 update Hey Guys, Well, I've made some progress in getting the tranny ready to go in the truck. I got my servo cover drilled and tapped for the pressure switch. Now I'm working on the speedometer gears. Forgive me if i get the names of these two gears mixed up. I got the (driven gear) in place with no problems, but the (drive gear) is another story. I don't know how to take the old one off the shaft. I could use some help. How does the one on the shaft in the pics come off? Thanks guys I'll post more update pics soon. Tim Attached Images

03-14-2008, 03:08 PM	#2
Tim64 Registered User Join Date: Aug 2007 Location: Vandalia, Ohio Posts: 396	Re: 700r4 update Now, I find it hard to believe that none of you guys have ever had to remove this ring. I'm thinking some kind of puller might work, but it sure would be nice to hear from someone who has done it. Thanks, Tim

03-14-2008, 06:03 PM	#3
ChiefRocka Hollister, CA. Join Date: Sep 2006 Location: Hollister, Ca. Posts: 6,150	Re: 700r4 update Yeap, a puller is what I used back in high-school when we use to overhaul trannys. I just picked an 700R4 for the Chief...it came out of an 89 IROC Camaro. Can't wait to throw it in...although it won't be for a while. Later John __________________ John What the Heck is that ?? CURRENT BUILDS: 62 BurbMaster Other Builds: My '63 C-10,LWB,CC,BBW '06 HD StrAight Axle Swap Father/Son '67 C-20, LQ9,4L80,Bagged,8-Lugger !!Good Friend Richard's Build AMERICAN CUSTOMS & CLASSICS (831) 630-1965 www.ACCHOLLISTER.com ACC on FACEBOOK "Rest in Peace, Mom & Dad ... I will see you again someday!"

03-14-2008, 07:22 PM	#4
Chevy Fleetside Registered User Join Date: Sep 2006 Location: San Francisco Posts: 4,782	Re: 700r4 update Give me a hollar if you need some help Chief. I can do it on a weekend when I don't have to watch Luca.. __________________ "A man and his truck, what a beautiful thing" 65 Short Fleetside BBC 65 Long Fleetside 283 3 on the tree for now. my build thread http://www.67-72chevytrucks.com/vboa...d.php?t=259536

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.