![]() |
![]() |
#1 |
Registered User
Join Date: Jan 2002
Location: harvard ne, usa
Posts: 52
|
![]() ![]() ive got a stock 350 with headers, HEI, and a turbo 350 tranny all decked out for racing, i need a carb, on my intake i already made plates for the thermostatic choke and the EGR, i was wonering what kinda of carb to go with and what size, and if anyone had one for sale. thanks |
![]() |
![]() |
![]() |
#2 |
Registered User
Join Date: Mar 2002
Location: jeffersonville, IN
Posts: 99
|
edelbrock 650 or 750, you can't go wrong with it.
they work like a champ, very reliable, easy to tune
__________________
Jeff Scott '70 GMC Stepside, Short box '63 Nova '92 GMC typhoon '95 Tahoe |
![]() |
![]() |
![]() |
#3 |
440 american Horses
Join Date: Mar 2001
Location: Anoka, MN USA
Posts: 470
|
for a stock 350 I'd run a 600 edelbrock, if you've got a good cam, and are planning on running high RPM's then I'd look at the 750
__________________
Seth Petro 1969 Chev Short Step 425hp 350, TH400, big tires, fast truck 1979 Pontiac Trans Am 1991 Saturn SL1 - gas mileage! (and free) 1977 Buick LeSabre - for sale May America bless God, and may God bless America ![]() |
![]() |
![]() |
![]() |
#4 |
Registered User
Join Date: Sep 2002
Location: Gilbert, AZ
Posts: 151
|
I am running a performer cam (which is not huge, but quite a bit bigger than stock) in my 69 camaro with a 600 edelbrock. Just take you max rpm, what ever you shift at and put it into this formula.
Engine size(350, 355, etc.) X max rpm / 3456 = cfm requirements For example: 355(my engine) X 5500 (My max rpm) / 3456 = 564.95 cfm A 500 cfm probably would have worked but I always round up to the next size carb available. Hope this helps,
__________________
FGC |
![]() |
![]() |
![]() |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|