WTB driveshaft..... - The 1947 - Present Chevrolet & GMC Truck Message Board Network

locab36 · 03-19-2008, 01:28 AM

I need a driveshaft for my boys truck. Its a 93 silverado reg cab longbox 2 wheel drive auto/OD. The one in it has the fiber glass/carbon? seperating. Its causing a vibration @ about 65mph. Local salvage yard parts have same problem. Anyone have one?

John

CPNEJR · 03-22-2008, 01:42 AM

I have one out of my 88 that i'll let go for 75 + shipping

locab36 · 03-22-2008, 03:16 AM

If its the same I'll take it. I wouldn't think shipping to be all that much. My boys truck is @ the muffler shop today, I should get it back tomorrow. I'll measure it and get the numbers to you. Is yours the carbon fiber/ fiberglass type? No damage? Complete shaft w/the tranny yoke?

thanks
John

CPNEJR · 03-22-2008, 03:28 AM

I believe it's aluminum. it's out of a reg cab long box w'700r4. it's the complete shaft with the yoke

locab36 · 03-22-2008, 04:36 AM

Probably is. I checked autozone.com for u-joint compatibilities and they seem the same based on inside or outside cup clips. Could you figure shipping and let me know. Paypal or MO?

John

CPNEJR · 03-22-2008, 08:41 PM

MO would be great. i'll figure ot shipping as soon as i can. where are you at?

tallhoedude · 04-09-2008, 08:59 PM

Had this happen on one of my trucks,just cut off the carbon fiber wrap,scuff off the corrosion,paint it and go!!
fixed the vibrations at60-65 for me

locab36 · 04-11-2008, 02:32 PM

Put a new u-joint on the used shaft I got from CPNEJR and no vibrations. Great! Thanks.

John

CPNEJR · 04-12-2008, 12:57 AM

no problem. glad it fits

03-19-2008, 01:28 AM	#1
locab36 Registered User Join Date: Jun 2004 Location: Midland, MI Posts: 265	WTB driveshaft..... I need a driveshaft for my boys truck. Its a 93 silverado reg cab longbox 2 wheel drive auto/OD. The one in it has the fiber glass/carbon? seperating. Its causing a vibration @ about 65mph. Local salvage yard parts have same problem. Anyone have one? John __________________ Locab36 1936 low cab 1/2 ton 1956 BMW R25/3 1968 Moto Guzzi V7 1969 BMW R100/2 1986 Silverado SWB 2007 Harley FLHTP 2011 GMC SWB 4x4 Z71 http://www.flickr.com/photos/locab36...7623329816080/

03-22-2008, 01:42 AM	#2
CPNEJR Registered User Join Date: Sep 2003 Location: Franconia,N.H. Posts: 1,029	Re: WTB driveshaft..... I have one out of my 88 that i'll let go for 75 + shipping __________________ (Only) Member of the CPNE Fan Club Aint that the truth 67 C-10 350 with 3-speed tranny and 308 gears swb step 82 Z28 Camaro 355 small block over 350 hp and a borg warner super t-10 (blown engine) 72 Chevy K20 Suburban (future project) 70 Chevy K20 now 68 GMC K2500 2003 Chevy 2500hd ccsb 4X4 (daily driver)

03-22-2008, 03:16 AM	#3
locab36 Registered User Join Date: Jun 2004 Location: Midland, MI Posts: 265	Re: WTB driveshaft..... If its the same I'll take it. I wouldn't think shipping to be all that much. My boys truck is @ the muffler shop today, I should get it back tomorrow. I'll measure it and get the numbers to you. Is yours the carbon fiber/ fiberglass type? No damage? Complete shaft w/the tranny yoke? thanks John __________________ Locab36 1936 low cab 1/2 ton 1956 BMW R25/3 1968 Moto Guzzi V7 1969 BMW R100/2 1986 Silverado SWB 2007 Harley FLHTP 2011 GMC SWB 4x4 Z71 http://www.flickr.com/photos/locab36...7623329816080/

03-22-2008, 03:28 AM	#4
CPNEJR Registered User Join Date: Sep 2003 Location: Franconia,N.H. Posts: 1,029	Re: WTB driveshaft..... I believe it's aluminum. it's out of a reg cab long box w'700r4. it's the complete shaft with the yoke __________________ (Only) Member of the CPNE Fan Club Aint that the truth 67 C-10 350 with 3-speed tranny and 308 gears swb step 82 Z28 Camaro 355 small block over 350 hp and a borg warner super t-10 (blown engine) 72 Chevy K20 Suburban (future project) 70 Chevy K20 now 68 GMC K2500 2003 Chevy 2500hd ccsb 4X4 (daily driver)

03-22-2008, 04:36 AM	#5
locab36 Registered User Join Date: Jun 2004 Location: Midland, MI Posts: 265	Re: WTB driveshaft..... Probably is. I checked autozone.com for u-joint compatibilities and they seem the same based on inside or outside cup clips. Could you figure shipping and let me know. Paypal or MO? John __________________ Locab36 1936 low cab 1/2 ton 1956 BMW R25/3 1968 Moto Guzzi V7 1969 BMW R100/2 1986 Silverado SWB 2007 Harley FLHTP 2011 GMC SWB 4x4 Z71 http://www.flickr.com/photos/locab36...7623329816080/

03-22-2008, 08:41 PM	#6
CPNEJR Registered User Join Date: Sep 2003 Location: Franconia,N.H. Posts: 1,029	Re: WTB driveshaft..... MO would be great. i'll figure ot shipping as soon as i can. where are you at? __________________ (Only) Member of the CPNE Fan Club Aint that the truth 67 C-10 350 with 3-speed tranny and 308 gears swb step 82 Z28 Camaro 355 small block over 350 hp and a borg warner super t-10 (blown engine) 72 Chevy K20 Suburban (future project) 70 Chevy K20 now 68 GMC K2500 2003 Chevy 2500hd ccsb 4X4 (daily driver) Last edited by CPNEJR; 03-22-2008 at 08:43 PM.

04-09-2008, 08:59 PM	#7
tallhoedude ROCKWELL 5 TON CLUB !! Join Date: Oct 2006 Location: indiana Posts: 516	Re: WTB driveshaft..... Had this happen on one of my trucks,just cut off the carbon fiber wrap,scuff off the corrosion,paint it and go!! fixed the vibrations at60-65 for me __________________ 1970 K5 "ON THE ROCKS" PROJECT:500hp 6.0 fuel injected. 2wd sm465 trans,t136 2.5 ton transfercase,5ton rockwells with 9.34 gears,custom wheel disc brakes,full hydro steering20+" OF LIFT AND 67/35/25's..67" tall TRACTOR TIRES.."THE MUD SLUT!!" MY BUILD THREAD: http://67-72chevytrucks.com/vboard/s...d.php?t=221935 1997 TAHOE,SAS D60 14B,5:13 DISC BRAKES,CROSSOVER STEER,HYDRO ASSIST,42 IROKS HINT:NEW NAME "K5ontheROCKS!"

04-11-2008, 02:32 PM	#8
locab36 Registered User Join Date: Jun 2004 Location: Midland, MI Posts: 265	Re: WTB driveshaft..... Put a new u-joint on the used shaft I got from CPNEJR and no vibrations. Great! Thanks. John __________________ Locab36 1936 low cab 1/2 ton 1956 BMW R25/3 1968 Moto Guzzi V7 1969 BMW R100/2 1986 Silverado SWB 2007 Harley FLHTP 2011 GMC SWB 4x4 Z71 http://www.flickr.com/photos/locab36...7623329816080/

04-12-2008, 12:57 AM	#9
CPNEJR Registered User Join Date: Sep 2003 Location: Franconia,N.H. Posts: 1,029	Re: WTB driveshaft..... no problem. glad it fits __________________ (Only) Member of the CPNE Fan Club Aint that the truth 67 C-10 350 with 3-speed tranny and 308 gears swb step 82 Z28 Camaro 355 small block over 350 hp and a borg warner super t-10 (blown engine) 72 Chevy K20 Suburban (future project) 70 Chevy K20 now 68 GMC K2500 2003 Chevy 2500hd ccsb 4X4 (daily driver)

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.