Frame mounted Master cylinder - The 1947 - Present Chevrolet & GMC Truck Message Board Network

68whitechevy · 03-23-2008, 02:41 AM

Is anybody on here running a frame mounted master cylinder? I'm have been thinking about trying to do this and wondering if anybody has tried it already.

Oh and with or without power?

68whitechevy · 03-24-2008, 07:17 PM

one more time

abadsvt · 03-25-2008, 05:30 AM

I am pretty sure there isn't enough room to run one. The stock 67-72 trucks don't have enough of a factory body drop to use one. Now i am not 100% sure it can't be done but everything i have looked at wouldn't work.

Josh

68whitechevy · 03-25-2008, 05:43 AM

thanks for the thought. I havent looked a whole lot into it. Just thinking it may be nice to do.

stunna · 03-25-2008, 09:29 PM

actually you can mount a hydraboost system on the frame. No limit engineering will make a kit that is bolt in for it. it is pricey!

68whitechevy · 03-26-2008, 05:41 AM

have you used one of these kits?

stunna · 03-26-2008, 09:09 PM

no i haven't, but i hae been told by more than one brake manufacturer or retailer that it can be done. i have talked to no limit on several occasions about it and they have done them. the guy you need to talk to is Michael

68whitechevy · 03-26-2008, 09:20 PM

thanks ill check them out

03-23-2008, 02:41 AM	#1
68whitechevy Registered User Join Date: Mar 2008 Location: Texas Posts: 16	Frame mounted Master cylinder Is anybody on here running a frame mounted master cylinder? I'm have been thinking about trying to do this and wondering if anybody has tried it already. Oh and with or without power?

03-24-2008, 07:17 PM	#2
68whitechevy Registered User Join Date: Mar 2008 Location: Texas Posts: 16	Re: Frame mounted Master cylinder one more time

03-25-2008, 05:30 AM	#3
abadsvt Senior Member Join Date: Aug 2006 Location: Atascadero, CA Posts: 1,152	Re: Frame mounted Master cylinder I am pretty sure there isn't enough room to run one. The stock 67-72 trucks don't have enough of a factory body drop to use one. Now i am not 100% sure it can't be done but everything i have looked at wouldn't work. Josh __________________ (Project truck) 1970 C10 under complete transformation My current build thread http://67-72chevytrucks.com/vboard/s...d.php?t=212871 Other project: C5 corvette swap into 70 c10 http://67-72chevytrucks.com/vboard/s...=1#post2413517 On Hold

03-25-2008, 05:43 AM	#4
68whitechevy Registered User Join Date: Mar 2008 Location: Texas Posts: 16	Re: Frame mounted Master cylinder thanks for the thought. I havent looked a whole lot into it. Just thinking it may be nice to do.

03-25-2008, 09:29 PM	#5
stunna Registered User Join Date: Nov 2006 Location: high point nc Posts: 442	Re: Frame mounted Master cylinder actually you can mount a hydraboost system on the frame. No limit engineering will make a kit that is bolt in for it. it is pricey!

03-26-2008, 05:41 AM	#6
68whitechevy Registered User Join Date: Mar 2008 Location: Texas Posts: 16	Re: Frame mounted Master cylinder have you used one of these kits?

03-26-2008, 09:09 PM	#7
stunna Registered User Join Date: Nov 2006 Location: high point nc Posts: 442	Re: Frame mounted Master cylinder no i haven't, but i hae been told by more than one brake manufacturer or retailer that it can be done. i have talked to no limit on several occasions about it and they have done them. the guy you need to talk to is Michael

03-26-2008, 09:20 PM	#8
68whitechevy Registered User Join Date: Mar 2008 Location: Texas Posts: 16	Re: Frame mounted Master cylinder thanks ill check them out

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.