|
03-24-2008, 03:02 AM
|
#1 |
|
Bite me, import boy
Join Date: Apr 2005
Location: Eagle Point, Oregon
Posts: 102
|
Hood hinge spring
I need a picture on how the spring attaches to the hood hinge on a 65. The previous owner disassembled it and now I have boxes of parts to deal with. Finally have some time to start working on this truck again.
Thanks for the help, Jason
__________________
Jason '71 C-10 Deluxe-under construction '69 C20, 396,T400-donor truck, '65 C10 project "Facts are meaningless, You can use facts to prove anything that's even remotely true." |
|
|
|
03-24-2008, 06:24 AM
|
#2 |
|
Cantankerous Geezer
Join Date: Aug 2002
Location: Bel Aire, KS
Posts: 6,264
|
Re: Hood hinge spring
I don't have the pics, but will recommend you invest in a factory assembly manual. What they are is a book of production illustrations showing how the pieces of the truck go together. They show where hoses and wires were routed too. Should be a big help to you. You can buy them from the vendors.
__________________
Fred There is no such thing as too much cam...just not enough engine. 
|
|
|
|
|
03-24-2008, 09:16 AM
|
#3 |
|
60-66 Nut
  Join Date: Mar 2007
Location: Coeur d'Alene, Idaho
Posts: 23,252
|
Re: Hood hinge spring
I'll take a pic tomorrow when I'm at the shop and post for ya....
__________________
Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE |
|
|
|
|
03-24-2008, 09:28 AM
|
#4 |
|
Registered User
Join Date: Jan 2007
Location: Madera, California
Posts: 291
|
Re: Hood hinge spring
Hope this helps.
|
|
|
|
|
03-24-2008, 11:03 PM
|
#5 |
|
Bite me, import boy
Join Date: Apr 2005
Location: Eagle Point, Oregon
Posts: 102
|
Re: Hood hinge spring
I think that will do just fine. Thanks a lot.
Jason
__________________
Jason '71 C-10 Deluxe-under construction '69 C20, 396,T400-donor truck, '65 C10 project "Facts are meaningless, You can use facts to prove anything that's even remotely true." |
|
|
|
|
03-25-2008, 03:24 AM
|
#6 |
|
Bite me, import boy
Join Date: Apr 2005
Location: Eagle Point, Oregon
Posts: 102
|
Re: Hood hinge spring
It was so obvious once I saw the picture and then put the hinge on the inner fender. I was looking for 2 notches on the hinge that the spring would attach to, like a 67-72. Thanks again for the help.
Jason
__________________
Jason '71 C-10 Deluxe-under construction '69 C20, 396,T400-donor truck, '65 C10 project "Facts are meaningless, You can use facts to prove anything that's even remotely true." |
|
|
|
 |
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
