WTB - wiper motor mounting sheet metal - The 1947 - Present Chevrolet & GMC Truck Message Board Network

ChevLoRay · 04-06-2008, 05:31 PM

My wiper motor fell through the cab (don't use industrial silastic....thanks to the P.O.).

So, I'd like to buy a patch panel from a cab that has a good original wiper mount intact.

Any help will be greatly appreciated.

billsbowtie · 04-07-2008, 04:29 AM

i think i have what you need . i will look for a pic.

ChevLoRay · 04-07-2008, 06:04 PM

Thanks, man. I await your pic.

billsbowtie · 04-08-2008, 03:44 AM

i will try to get one monday.

billsbowtie · 04-09-2008, 06:22 AM

i think this is the part you are looking for. but i don't see any way of cutting it out. can't get a grinder or sawzaw in there .

**John Fabris** · 04-09-2008, 08:54 PM

Not to step on Bills toes, but if he does not come through for you on this, let me know, as I am cutting up a 67 cab for a project that I am working on and I do not need the cowl section, so I can cut as much or little as you need. Cab is rusted out along floor and above windshield.

billsbowtie · 04-10-2008, 04:15 AM

john if you can help him go ahead. sounds like you can get in there to the piece he needs alot easier than i can right now. bill

04-06-2008, 05:31 PM	#1
ChevLoRay Old Skool Club Join Date: Jun 2001 Location: Benton, AR "The Heart of Arkansas" Posts: 10,880	WTB - wiper motor mounting sheet metal My wiper motor fell through the cab (don't use industrial silastic....thanks to the P.O.). So, I'd like to buy a patch panel from a cab that has a good original wiper mount intact. Any help will be greatly appreciated. __________________ Member Nr. 2770 '96 GMC Sportside; 4.3/SLT - Daily driven....constantly needs washed. '69 C-10 SWB; 350/TH400 - in limbo The older I get, the better I was.

04-07-2008, 04:29 AM	#2
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: WTB - wiper motor mounting sheet metal i think i have what you need . i will look for a pic. __________________ i have 67/72 chevy truck parts f/s.

04-07-2008, 06:04 PM	#3
ChevLoRay Old Skool Club Join Date: Jun 2001 Location: Benton, AR "The Heart of Arkansas" Posts: 10,880	Re: WTB - wiper motor mounting sheet metal Thanks, man. I await your pic. __________________ Member Nr. 2770 '96 GMC Sportside; 4.3/SLT - Daily driven....constantly needs washed. '69 C-10 SWB; 350/TH400 - in limbo The older I get, the better I was.

04-08-2008, 03:44 AM	#4
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: WTB - wiper motor mounting sheet metal i will try to get one monday. __________________ i have 67/72 chevy truck parts f/s.

04-09-2008, 06:22 AM	#5
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: WTB - wiper motor mounting sheet metal i think this is the part you are looking for. but i don't see any way of cutting it out. can't get a grinder or sawzaw in there . __________________ i have 67/72 chevy truck parts f/s.

04-09-2008, 08:54 PM	#6
John Fabris TOTY 2006 Join Date: Dec 1999 Location: Magalia CA USA Posts: 2,270	Re: WTB - wiper motor mounting sheet metal Not to step on Bills toes, but if he does not come through for you on this, let me know, as I am cutting up a 67 cab for a project that I am working on and I do not need the cowl section, so I can cut as much or little as you need. Cab is rusted out along floor and above windshield. __________________ John Fabris 67 C10 SWB

04-10-2008, 04:15 AM	#7
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: WTB - wiper motor mounting sheet metal john if you can help him go ahead. sounds like you can get in there to the piece he needs alot easier than i can right now. bill __________________ i have 67/72 chevy truck parts f/s.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.