Gringoloco's Spring Cleaning Sale - The 1947 - Present Chevrolet & GMC Truck Message Board Network

gringoloco · 04-11-2008, 06:47 PM

UPDATES:

1) Crossmember *SOLD*

2) Shocks *SOLD*

3) Cups *SOLD*

4) U-bolts
1" longer set *SOLD*
New stock length *SOLD*

5) Tailgate Trim *SOLD*

6) Flip Kit *SOLD*

7) LS1 Mounts *SOLD*

___________________________________________
___________________________________________

1) 2WD automatic transmission crossmember. Powdercoated semi-gloss black. Two small scratches on mounting pad are not visible when installed.

SOLD

gringoloco · 04-11-2008, 07:11 PM

2) Pair of Explorer 'Toxic' drop shocks. ~18" extended, 11" collapsed. These are what Summit Racing sends for a 3" to 5" drop on the rear of a coil spring truck. Little dirty but still work perfectly. I'd still be using them if both my trucks weren't bagged...

SOLD

gringoloco · 04-11-2008, 07:15 PM

3) Pair of ***************** lower bag cups. These bolt to the bottom of air springs to allow them to sit in the front lower control arm spring pocket. They have been trimmed to 1" total height and powdercoated semi-gloss black.

$10 plus shipping

myoldchevytruck · 04-11-2008, 07:16 PM

Can you get me a shipping cost to 33024 on the shocks? Thanks, Harry

gringoloco · 04-11-2008, 07:22 PM

4) Coil spring rear axle u-bolts. I have three pairs of these. Two are stock length and one pair are 1" longer.

Left: I used them for mock up, but never torqued them down. They have a little overspray and light surface rust.

$15 plus shipping

Middle: Brand new stock length

$20 plus shipping

Right: Brand new 1" longer than stock

$25 plus shipping

Spray-Bomb has dibs on one set.

gringoloco · 04-11-2008, 07:33 PM

Quote:

Originally Posted by myoldchevytruck

Can you get me a shipping cost to 33024 on the shocks? Thanks, Harry

UPS ground is $12.86 on their online estimator.

myoldchevytruck · 04-11-2008, 07:36 PM

Sent you a PM

gringoloco · 04-11-2008, 07:37 PM

5) Upper tailgate trim. Good and straight, no dings. Would polish out very nicely. Missing one clip.

SOLD

gringoloco · 04-11-2008, 07:43 PM

6) DJM rear axle flip kit. This kit will place the rear axle on top of the rear leaf springs giving you around 5.5" of drop. I removed it from my truck when I converted from leaves to coils.

SOLD

buffle · 04-11-2008, 07:47 PM

Flip kit to zip 64055, thanx buffle

gringoloco · 04-11-2008, 07:50 PM

7) Early Classic (ECE) GenIII motor mount kit. This will allow you to bolt a late model Vortec 4.8, 5.3, 6.0 or an LS1, LS2 etc. into your truck's engine bay. I went to a Dropmember setup, so I have no use for it.

SOLD

gringoloco · 04-11-2008, 07:55 PM

Quote:

Originally Posted by buffle

Flip kit to zip 64055, thanx buffle

UPS Ground $14.81 by Monday.

**phase_one** · 04-11-2008, 08:40 PM

put in line pending shipping on engine mounts. Also I have 92 5.7 will these work?

gringoloco · 04-11-2008, 09:05 PM

Quote:

Originally Posted by phase_one

put in line pending shipping on engine mounts. Also I have 92 5.7 will these work?

These are not needed. You should be able to use your stock mounts. These are intended for the '98-up motors...

70inline6 · 04-11-2008, 09:06 PM

Quote:

Originally Posted by gringoloco

2WD automatic transmission crossmember. Powdercoated semi-gloss black. Two small scratches on mounting pad are not visible when installed.

$30 Plus shipping

I'll take it pending shipping to North Carolina 28540 please.

LUV2XCLR8 · 04-11-2008, 09:28 PM

Quote:

Originally Posted by gringoloco

3) Pair of ***************** lower bag cups. These bolt to the bottom of air springs to allow them to sit in the front lower control arm spring pocket. They have been trimmed to 1" total height and powdercoated semi-gloss black.

$10 plus shipping

Are these for stock lower control arms?

Shipping to 38313

**D.PASSMORE** · 04-11-2008, 09:57 PM

Axle Flip kit, shipping to 32092

**Thealien** · 04-11-2008, 10:39 PM

How much to ship the tailgate trim to 02302?

bryanschevyparts · 04-12-2008, 12:31 AM

next on the tailgate trim shipped 55330

*truckmanloco* · 04-12-2008, 01:59 AM

put me in line for the mounts pending shipping

kingsolver72 · 04-12-2008, 02:46 AM

I will take the 1" longer u bolts if no one has a claim on them and pending shipping to 66067.

*truckmanloco* · 04-12-2008, 04:23 AM

Quote:

Originally Posted by truckmanloco

put me in line for the mounts pending shipping

to 91910

5150 · 04-12-2008, 12:38 PM

shipping on bag cups and engine mounts to 37188

Tutt · 04-12-2008, 04:04 PM

i will take the motor mounts and the shocks if they are still available. let me know where i can send the payment.

gringoloco · 04-12-2008, 06:32 PM

Quote:

Originally Posted by 70inline6

I'll take it pending shipping to North Carolina 28540 please.

UPS ground $14.38

Quote:

Originally Posted by LUV2XCLR8

Are these for stock lower control arms?

Shipping to 38313

Guys here have said they work with 73-87 arms. I ended up using 1.5" cups for peace of mind... They will go in a Flat Rate envelope -$5

Quote:

Originally Posted by D.PASSMORE

Axle Flip kit, shipping to 32092

UPS Ground $17.44

Quote:

Originally Posted by Thealien

How much to ship the tailgate trim to 02302?

They will go in a tube. Call it $10 for materials and shipping.

Quote:

Originally Posted by bryanschevyparts

next on the tailgate trim shipped 55330

Same deal if thealien passes...

Quote:

Originally Posted by truckmanloco

put me in line for the mounts pending shipping

UPS Ground $22.17 to 91910

Quote:

Originally Posted by kingsolver72

I will take the 1" longer u bolts if no one has a claim on them and pending shipping to 66067.

They will go in a Flat Rate envelope -$5

Quote:

Originally Posted by 5150

shipping on bag cups and engine mounts to 37188

If the others pass, I'll throw the cups in the same box. UPS Ground $17.04

Quote:

Originally Posted by Tutt

i will take the motor mounts and the shocks if they are still available. let me know where i can send the payment.

Shocks are pending sale to myoldchevytruck and there are a few ahead of you for the mounts. I'll let you know when/if it gets to you...

04-11-2008, 06:47 PM	#1
gringoloco A guy with a truck Join Date: Sep 2005 Location: Germany, for now Posts: 5,921	Gringoloco's Spring Cleaning Sale UPDATES: 1) Crossmember SOLD 2) Shocks SOLD 3) Cups SOLD 4) U-bolts 1" longer set SOLD New stock length SOLD 5) Tailgate Trim SOLD 6) Flip Kit SOLD 7) LS1 Mounts SOLD ___________________________________________ ___________________________________________ 1) 2WD automatic transmission crossmember. Powdercoated semi-gloss black. Two small scratches on mounting pad are not visible when installed. *SOLD* Attached Images __________________ -Chris Instagram _elgringoloco_ '70 Short-Wide How to: Ruin a perfectly good C10 ‘70 Blazer ConversionHow To: Ruin a Perfectly Good 4wd '72 Highlander How To: Ruin a Perfectly Good K/5 (SOLD) '72 Blazer 2WD How to: Ruin a perfectly good Blazer (SOLD) '05 Yukon Daily Driven (not so stock) Yukon (SOLD) ‘07 Yukon Denali (daily) Members met list: SCOTI, darkhorse970, 67cheby, 67cheby'sGirl, klmore, porterbuilt, n2billet, Fastrucken, classicchev, Col Clank, GSFMECH, HuggerCST, Spray-Bomb, BACKYARD88, 5150, fine69, fatbass, smbrouss70, 65StreetCruiser, GAc10boy Last edited by gringoloco; 04-19-2008 at 03:10 AM. Reason: Update

04-11-2008, 07:11 PM	#2
gringoloco A guy with a truck Join Date: Sep 2005 Location: Germany, for now Posts: 5,921	Re: Gringoloco's Spring Cleaning Sale 2) Pair of Explorer 'Toxic' drop shocks. ~18" extended, 11" collapsed. These are what Summit Racing sends for a 3" to 5" drop on the rear of a coil spring truck. Little dirty but still work perfectly. I'd still be using them if both my trucks weren't bagged... *SOLD* Attached Images __________________ -Chris Instagram _elgringoloco_ '70 Short-Wide How to: Ruin a perfectly good C10 ‘70 Blazer ConversionHow To: Ruin a Perfectly Good 4wd '72 Highlander How To: Ruin a Perfectly Good K/5 (SOLD) '72 Blazer 2WD How to: Ruin a perfectly good Blazer (SOLD) '05 Yukon Daily Driven (not so stock) Yukon (SOLD) ‘07 Yukon Denali (daily) Members met list: SCOTI, darkhorse970, 67cheby, 67cheby'sGirl, klmore, porterbuilt, n2billet, Fastrucken, classicchev, Col Clank, GSFMECH, HuggerCST, Spray-Bomb, BACKYARD88, 5150, fine69, fatbass, smbrouss70, 65StreetCruiser, GAc10boy Last edited by gringoloco; 04-16-2008 at 02:29 AM.

04-11-2008, 07:15 PM	#3
gringoloco A guy with a truck Join Date: Sep 2005 Location: Germany, for now Posts: 5,921	Re: Gringoloco's Spring Cleaning Sale 3) Pair of *************** lower bag cups. These bolt to the bottom of air springs to allow them to sit in the front lower control arm spring pocket. They have been trimmed to 1" total height and powdercoated semi-gloss black. $10 plus shipping Attached Images __________________ -Chris Instagram _elgringoloco_ '70 Short-Wide How to: Ruin a perfectly good C10 ‘70 Blazer ConversionHow To: Ruin a Perfectly Good 4wd '72 Highlander How To: Ruin a Perfectly Good K/5 (SOLD) '72 Blazer 2WD How to: Ruin a perfectly good Blazer (SOLD) '05 Yukon Daily Driven (not so stock) Yukon (SOLD) ‘07 Yukon Denali** (daily) Members met list: SCOTI, darkhorse970, 67cheby, 67cheby'sGirl, klmore, porterbuilt, n2billet, Fastrucken, classicchev, Col Clank, GSFMECH, HuggerCST, Spray-Bomb, BACKYARD88, 5150, fine69, fatbass, smbrouss70, 65StreetCruiser, GAc10boy

04-11-2008, 07:16 PM	#4
myoldchevytruck Retired Air Force Veteran Join Date: Aug 2007 Location: Pembroke Pines, Florida 33024 Posts: 1,808	Re: Gringoloco's Spring Cleaning Sale Can you get me a shipping cost to 33024 on the shocks? Thanks, Harry __________________ Harry 69' SWB Step Side 1/2 Ton w/68' Front Clip Swap from Leafs to Trailing Arms (Complete) Swap 6 Lug to 5 Lug (w/ Disk Brakes in Front) 3/6 Drop Help Support The Board Click Here For Information On How To Subscribe Krue's FAQ Page Vendors

04-11-2008, 07:22 PM	#5
gringoloco A guy with a truck Join Date: Sep 2005 Location: Germany, for now Posts: 5,921	Re: Gringoloco's Spring Cleaning Sale 4) Coil spring rear axle u-bolts. I have three pairs of these. Two are stock length and one pair are 1" longer. Left: I used them for mock up, but never torqued them down. They have a little overspray and light surface rust. $15 plus shipping Middle: Brand new stock length $20 plus shipping Right: Brand new 1" longer than stock $25 plus shipping Spray-Bomb has dibs on one set. Attached Images __________________ -Chris Instagram _elgringoloco_ '70 Short-Wide How to: Ruin a perfectly good C10 ‘70 Blazer ConversionHow To: Ruin a Perfectly Good 4wd '72 Highlander How To: Ruin a Perfectly Good K/5 (SOLD) '72 Blazer 2WD How to: Ruin a perfectly good Blazer (SOLD) '05 Yukon Daily Driven (not so stock) Yukon (SOLD) ‘07 Yukon Denali (daily) Members met list: SCOTI, darkhorse970, 67cheby, 67cheby'sGirl, klmore, porterbuilt, n2billet, Fastrucken, classicchev, Col Clank, GSFMECH, HuggerCST, Spray-Bomb, BACKYARD88, 5150, fine69, fatbass, smbrouss70, 65StreetCruiser, GAc10boy

04-11-2008, 07:36 PM	#7
myoldchevytruck Retired Air Force Veteran Join Date: Aug 2007 Location: Pembroke Pines, Florida 33024 Posts: 1,808	Re: Gringoloco's Spring Cleaning Sale Sent you a PM __________________ Harry 69' SWB Step Side 1/2 Ton w/68' Front Clip Swap from Leafs to Trailing Arms (Complete) Swap 6 Lug to 5 Lug (w/ Disk Brakes in Front) 3/6 Drop Help Support The Board Click Here For Information On How To Subscribe Krue's FAQ Page Vendors

04-11-2008, 07:37 PM	#8
gringoloco A guy with a truck Join Date: Sep 2005 Location: Germany, for now Posts: 5,921	Re: Gringoloco's Spring Cleaning Sale 5) Upper tailgate trim. Good and straight, no dings. Would polish out very nicely. Missing one clip. *SOLD* Attached Images __________________ -Chris Instagram _elgringoloco_ '70 Short-Wide How to: Ruin a perfectly good C10 ‘70 Blazer ConversionHow To: Ruin a Perfectly Good 4wd '72 Highlander How To: Ruin a Perfectly Good K/5 (SOLD) '72 Blazer 2WD How to: Ruin a perfectly good Blazer (SOLD) '05 Yukon Daily Driven (not so stock) Yukon (SOLD) ‘07 Yukon Denali (daily) Members met list: SCOTI, darkhorse970, 67cheby, 67cheby'sGirl, klmore, porterbuilt, n2billet, Fastrucken, classicchev, Col Clank, GSFMECH, HuggerCST, Spray-Bomb, BACKYARD88, 5150, fine69, fatbass, smbrouss70, 65StreetCruiser, GAc10boy Last edited by gringoloco; 04-16-2008 at 02:30 AM.

04-11-2008, 07:43 PM	#9
gringoloco A guy with a truck Join Date: Sep 2005 Location: Germany, for now Posts: 5,921	Re: Gringoloco's Spring Cleaning Sale 6) DJM rear axle flip kit. This kit will place the rear axle on top of the rear leaf springs giving you around 5.5" of drop. I removed it from my truck when I converted from leaves to coils. *SOLD* Attached Images __________________ -Chris Instagram _elgringoloco_ '70 Short-Wide How to: Ruin a perfectly good C10 ‘70 Blazer ConversionHow To: Ruin a Perfectly Good 4wd '72 Highlander How To: Ruin a Perfectly Good K/5 (SOLD) '72 Blazer 2WD How to: Ruin a perfectly good Blazer (SOLD) '05 Yukon Daily Driven (not so stock) Yukon (SOLD) ‘07 Yukon Denali (daily) Members met list: SCOTI, darkhorse970, 67cheby, 67cheby'sGirl, klmore, porterbuilt, n2billet, Fastrucken, classicchev, Col Clank, GSFMECH, HuggerCST, Spray-Bomb, BACKYARD88, 5150, fine69, fatbass, smbrouss70, 65StreetCruiser, GAc10boy Last edited by gringoloco; 04-16-2008 at 02:30 AM.

04-11-2008, 07:47 PM	#10
buffle buffle Join Date: Sep 2004 Location: Independence, Mo Posts: 426	Re: Gringoloco's Spring Cleaning Sale Flip kit to zip 64055, thanx buffle

04-11-2008, 07:50 PM	#11
gringoloco A guy with a truck Join Date: Sep 2005 Location: Germany, for now Posts: 5,921	Re: Gringoloco's Spring Cleaning Sale 7) Early Classic (ECE) GenIII motor mount kit. This will allow you to bolt a late model Vortec 4.8, 5.3, 6.0 or an LS1, LS2 etc. into your truck's engine bay. I went to a Dropmember setup, so I have no use for it. *SOLD* Attached Images __________________ -Chris Instagram _elgringoloco_ '70 Short-Wide How to: Ruin a perfectly good C10 ‘70 Blazer ConversionHow To: Ruin a Perfectly Good 4wd '72 Highlander How To: Ruin a Perfectly Good K/5 (SOLD) '72 Blazer 2WD How to: Ruin a perfectly good Blazer (SOLD) '05 Yukon Daily Driven (not so stock) Yukon (SOLD) ‘07 Yukon Denali (daily) Members met list: SCOTI, darkhorse970, 67cheby, 67cheby'sGirl, klmore, porterbuilt, n2billet, Fastrucken, classicchev, Col Clank, GSFMECH, HuggerCST, Spray-Bomb, BACKYARD88, 5150, fine69, fatbass, smbrouss70, 65StreetCruiser, GAc10boy Last edited by gringoloco; 04-16-2008 at 02:31 AM.

04-11-2008, 08:40 PM	#13
phase_one Registered User Join Date: Jul 2001 Location: Praireville. LA 70769 Posts: 390	Re: Gringoloco's Spring Cleaning Sale put in line pending shipping on engine mounts. Also I have 92 5.7 will these work? __________________ 11 Surbaban 70 C 10 still in progress

04-11-2008, 09:57 PM	#17
D.PASSMORE One of the First Join Date: Jan 2000 Location: St. Augustine,FL. Posts: 4,059	Re: Gringoloco's Spring Cleaning Sale Axle Flip kit, shipping to 32092

04-11-2008, 10:39 PM	#18
Thealien Senior Member Join Date: Jun 2007 Location: Pine Ridge Florida Posts: 4,135	Re: Gringoloco's Spring Cleaning Sale How much to ship the tailgate trim to 02302?

04-12-2008, 12:31 AM	#19
bryanschevyparts Registered User Join Date: Mar 2008 Location: elk river,mn Posts: 509	Re: Gringoloco's Spring Cleaning Sale next on the tailgate trim shipped 55330

04-12-2008, 01:59 AM	#20
truckmanloco Account Suspended Join Date: Nov 2007 Location: San Diego ca Posts: 717	Re: Gringoloco's Spring Cleaning Sale put me in line for the mounts pending shipping



Register or Log In To remove these advertisements.

04-12-2008, 02:46 AM	#21
kingsolver72 10/30/19 Join Date: Aug 2004 Location: ottawa kansas Posts: 5,248	Re: Gringoloco's Spring Cleaning Sale I will take the 1" longer u bolts if no one has a claim on them and pending shipping to 66067. __________________ Fight the good fight, finish the race, keep the faith Last edited by kingsolver72; 04-12-2008 at 02:47 AM.

04-12-2008, 12:38 PM	#23
5150 C10 Club Tennessee Join Date: Mar 2003 Location: White House, TN 37188 Posts: 8,281	Re: Gringoloco's Spring Cleaning Sale shipping on bag cups and engine mounts to 37188 __________________ Bryan www.gmtruckshow.com Project "Andes"-Halen's First Truck Project: Patina Burb for he is God’s servant for your good. But if you do wrong, be afraid, for he does not bear the sword in vain. For he is the servant of God, an avenger who carries out God’s wrath on the wrongdoer. Romans 13:4

04-12-2008, 04:04 PM	#24
Tutt Registered User Join Date: Dec 2005 Location: Houston TX Posts: 77	Re: Gringoloco's Spring Cleaning Sale i will take the motor mounts and the shocks if they are still available. let me know where i can send the payment.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.