Do reproduction radiator supports fit? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

henry3rd · 04-23-2008, 02:18 AM

Have a quick question ,do reproduction radiator supports fit?
What about the inner fenders? For a 68 c10 if you're wondering.
One last thing? Does any body on the east coast sell them so shipping woudn't cost me an arm and a leg?

Thanks!

Madmandav · 04-23-2008, 02:38 AM

So far I have found that the battery tray holes don't line up, had to cut the nuts off and reposition, but that is as far as I have gotten.

retselgerg · 04-23-2008, 02:53 AM

both inner fenders and rad support worked well 4 me

*Shane* · 04-23-2008, 03:33 AM

my "aftermarket Taiwan-Chines made radiator supports, battery box and front fenders bolted up fine, no mods.

PanelDeland · 04-23-2008, 04:02 AM

Henry 3, try contacting Tim Christian,he is a BB vendor and is near you.In fact he will be at the Maggie Valley Chevy/GMC Truck Nationals.If you attend you can save the shipping completely.

**special-K** · 04-23-2008, 04:56 AM

Ditto!How far from Rogersville are you?That`s where Tim is.

cobrajet21 · 04-23-2008, 05:06 AM

Modern Chevrolet in Winston-Salem has a Truck/Camaro/Nova aftermarket parts warehouse. Don't know how the prices are but worth lookin at.

cobrajet21 · 04-23-2008, 05:08 AM

Thats in North Carolina

henry3rd · 04-23-2008, 05:13 AM

thanks for the replies guys. I was unaware of Tim in rogersville. Probably an hour from me. That would definitely save on shipping!

jb4short · 04-23-2008, 02:31 PM

Tim's a good source for the part. As far as fit there was a "How to" in Truck Builder last year using all reproduction parts that Tim carries and everything went together great

bdydrp97s10 · 04-25-2008, 04:53 AM

yah tims a very great guy to deal with.. i have dealt withhim in the past and plan on it in the future.. goes out of his way for the customer

68 short step · 04-25-2008, 05:15 AM

also just a FYI, the 'bumps' about 13" from the end, where it starts to curve down, are not there....IMO it looks better this way, kinda a shaved smoothed look...
here is a pic of the 'bumps'

Premium72 · 04-25-2008, 05:55 AM

i get all my big stuff from these guys. thier rite down the road from me so theres no shipping. prolly about 2 hrs from chattanooga(not sure how far that is from you. ) but they always always give me the best prices!

http://www.johnsclassiccars.com/

Premium72 · 04-25-2008, 05:55 AM

oh and i got some radiator brackets from Brothers and they fit great!

04-23-2008, 02:18 AM	#1
henry3rd Registered User Join Date: Jun 2007 Location: East TN Posts: 42	Do reproduction radiator supports fit? Have a quick question ,do reproduction radiator supports fit? What about the inner fenders? For a 68 c10 if you're wondering. One last thing? Does any body on the east coast sell them so shipping woudn't cost me an arm and a leg? Thanks!

04-23-2008, 02:38 AM	#2
Madmandav Madmandav Join Date: Feb 2008 Location: Owensboro Ky Posts: 89	Re: Do reproduction radiator supports fit? So far I have found that the battery tray holes don't line up, had to cut the nuts off and reposition, but that is as far as I have gotten. __________________ I must be crazy, that's what the voices in my head keep telling me. Project FROSTBITE http://www.67-72chevytrucks.com/vboa...d.php?t=280249 http://www.67-72chevytrucks.com/vboa...d.php?t=287407 '72 Chevy longbed '70 Chevy longbed (million pieces)(FROSTBITE) '79 Monte Carlo '07 Chevy HHR '00 Yamaha V-star '05 Monte Carlo SS Supercharged

04-23-2008, 02:53 AM	#3
retselgerg Registered User Join Date: Mar 2007 Location: Grundy Virginia Posts: 385	Re: Do reproduction radiator supports fit? both inner fenders and rad support worked well 4 me __________________ "OLE BLUE" Goodwrench 350, 5speed, Tilt, PS, PB, "some guys got into cars for money or girls but i got into cars because of the cars" -Jay Leno

04-23-2008, 03:33 AM	#4
Shane Account Suspended Join Date: Jun 2000 Location: over yonder Posts: 14,270	Re: Do reproduction radiator supports fit? my "aftermarket Taiwan-Chines made radiator supports, battery box and front fenders bolted up fine, no mods.

04-23-2008, 04:02 AM	#5
PanelDeland I am a Referee of life. Join Date: Jun 2000 Location: Greensboro N.C. Posts: 13,992	Re: Do reproduction radiator supports fit? Henry 3, try contacting Tim Christian,he is a BB vendor and is near you.In fact he will be at the Maggie Valley Chevy/GMC Truck Nationals.If you attend you can save the shipping completely. __________________ The 47-present Chevrolet and GMC Truck Message Board Network,it's owners,moderators,members,and associates of any type should not be held responsible for my opinion. You can't fix stupid,not even with duct tape. "My appearance is due to the fact that "GOD" does punish you for having too much fun!" Barrett-Jackson has perfected alchemy,they make rust into gold! "You can lead a horse to water but you can't saddle a duck" "Cleverly disguised as a 'Responsible Adult' "Sometimes your Knight in shining armor is just a retard in tinfoil"

04-23-2008, 04:56 AM	#6
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: Do reproduction radiator supports fit? Ditto!How far from Rogersville are you?That`s where Tim is. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

04-23-2008, 05:06 AM	#7
cobrajet21 Registered User Join Date: Mar 2008 Location: Danville, VA Posts: 122	Re: Do reproduction radiator supports fit? Modern Chevrolet in Winston-Salem has a Truck/Camaro/Nova aftermarket parts warehouse. Don't know how the prices are but worth lookin at.

04-23-2008, 05:08 AM	#8
cobrajet21 Registered User Join Date: Mar 2008 Location: Danville, VA Posts: 122	Re: Do reproduction radiator supports fit? Thats in North Carolina

04-23-2008, 05:13 AM	#9
henry3rd Registered User Join Date: Jun 2007 Location: East TN Posts: 42	Re: Do reproduction radiator supports fit? thanks for the replies guys. I was unaware of Tim in rogersville. Probably an hour from me. That would definitely save on shipping!

04-23-2008, 02:31 PM	#10
jb4short Damn Yankee Join Date: Feb 2007 Location: Lynchburg, VA Posts: 2,261	Re: Do reproduction radiator supports fit? Tim's a good source for the part. As far as fit there was a "How to" in Truck Builder last year using all reproduction parts that Tim carries and everything went together great

04-25-2008, 04:53 AM	#11
bdydrp97s10 Registered User Join Date: Dec 2007 Location: Johnson City TN Posts: 570	Re: Do reproduction radiator supports fit? yah tims a very great guy to deal with.. i have dealt withhim in the past and plan on it in the future.. goes out of his way for the customer

04-25-2008, 05:15 AM	#12
68 short step Senior Member Join Date: Aug 2005 Location: tulsa OK Posts: 3,070	Re: Do reproduction radiator supports fit? also just a FYI, the 'bumps' about 13" from the end, where it starts to curve down, are not there....IMO it looks better this way, kinda a shaved smoothed look... here is a pic of the 'bumps'

04-25-2008, 05:55 AM	#13
Premium72 Registered User Join Date: Sep 2005 Location: Villa Rica Ga Posts: 889	Re: Do reproduction radiator supports fit? i get all my big stuff from these guys. thier rite down the road from me so theres no shipping. prolly about 2 hrs from chattanooga(not sure how far that is from you. ) but they always always give me the best prices! http://www.johnsclassiccars.com/ __________________ WombatFire, Art-Design-MADNESS Follow My Build and Adventures on Instagram

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.