Side window help needed - The 1947 - Present Chevrolet & GMC Truck Message Board Network

skydiver · 05-14-2008, 05:16 AM

Need some advice from the experts.

I just replaced the drivers side window and installed the vent window. When I tried to roll up the window it gets pinched half way up and will not go further. I was able to roll the window completely up before the vent window was installed. Has anyone else had this problem before? Everything looks like it is installed right. Help!

skydiver

Sammy · 05-14-2008, 06:23 AM

Guessing the vent window isn't seated & pulled all the way or the window track on the latch side isn't seated & pulled to it's side.

05-14-2008, 05:16 AM	#1
skydiver Just a fan. Join Date: Dec 2007 Location: Royal Oak, MI Posts: 39	Side window help needed Need some advice from the experts. I just replaced the drivers side window and installed the vent window. When I tried to roll up the window it gets pinched half way up and will not go further. I was able to roll the window completely up before the vent window was installed. Has anyone else had this problem before? Everything looks like it is installed right. Help! skydiver

05-14-2008, 06:23 AM	#2
Sammy Registered User Join Date: Apr 2000 Location: Bonne Terre, Mo Posts: 3,005	Re: Side window help needed Guessing the vent window isn't seated & pulled all the way or the window track on the latch side isn't seated & pulled to it's side. __________________ '69 Chevy Long Fleet & '71 GMC Short Step & Project "ODD BALL" "You can wash a pig, soak it in most expensive perfume. In the end it is still just a pig." ODD BALL build thread http://67-72chevytrucks.com/vboard/s...d.php?t=478629"

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.