|
05-18-2008, 02:05 PM
|
#1 |
|
Registered User
Join Date: Dec 2006
Location: POWNAL VERMONT
Posts: 343
|
ok suspension guy's ?
i have a 3/4 ton 1972 chevy and i want to put a 1/2 ton suspension out of a 1975 beau jame's edition it has 3.73 posi and is five lug the rear is no problem but as for the front this should bolt right in as in a-frames,and the complete cross member.if not what do i do. but i/m sure that if i unbolt it all as one peice off the frame it should bolt into my 72 i hope
__________________
1972 c-20 chevy 500 caddy/4.10posi / 1972 3/4 ton gmc 350 4x4/4.10posi front&rear   
|
|
|
|
05-18-2008, 03:14 PM
|
#2 |
|
just can't cover up my redneck
Join Date: May 2004
Location: Columbus OH
Posts: 11,414
|
Re: ok suspension guy's ?
It will all bolt in as one piece. The only issue is the rear-most bolts. They are slightly off. You just have to drill those two holes and you are good to go.
The biggest head-ache of this is supporting the engine while doing the swap. It would be far easier with the engine out, but I wouldn't go to the trouble to pull it, unless you intend to anyway. |
|
|
|
|
05-19-2008, 11:36 AM
|
#3 |
|
Registered User
Join Date: Dec 2006
Location: POWNAL VERMONT
Posts: 343
|
Re: ok suspension guy's ?
thank's i thought it would and yes the motor will be out for it
__________________
1972 c-20 chevy 500 caddy/4.10posi / 1972 3/4 ton gmc 350 4x4/4.10posi front&rear
|
|
|
|
 |
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
