![]() |
Register or Log In To remove these advertisements. |
|
|
![]() |
|
Thread Tools | Display Modes |
![]() |
#1 |
Registered User
Join Date: May 2008
Location: Atlanta Georgia
Posts: 7
|
67 Chevy C10 Control Arms Needed
I Am Putting Bags On My 67 C10 And Need To Know If Anyone Has Or Can Tell Me Where To Find Drop Spindles And Upper And Lower Control Arms W/ Or W/out Bag Mounts. I Also Need To Know If Anyone Knows If I Have To Move The Control Arms Up. I Have Been Told That I Will Have To Move The Control Arm Mounts Up 2 To 3 Inches. If Anyone Know Anything About This Please Let Me Know.
Thank You, Taylor |
![]() |
![]() |
![]() |
#2 |
Registered User
Join Date: Dec 2004
Location: Northern AZ
Posts: 7,271
|
Re: 67 Chevy C10 Control Arms Needed
I think ART makes a kit for our trucks, so you can use the stock A-arm, but either way ART will have the A-arms as well. Check out a site vendor.
|
![]() |
![]() |
![]() |
#3 |
Registered User
Join Date: May 2008
Location: Atlanta Georgia
Posts: 7
|
Re: 67 Chevy C10 Control Arms Needed
I Talked To A Couple Of Guys That Build Custom Suspension And They Said I Can Use The Stock Ones But They Were Pretty Sure I Would Have To Raise The Mounts And They Said I Would Be Better Off Getting Ones Designed To Lay The Truck On The Ground Or I Would Have Camber Issues. I Was Looking For Some So I Would Be Able To Ride Low W/ Out Any Major Camber Issues. Thanks For The Reply If U Know Anything Else Please Let Me Know. Taylor
|
![]() |
![]() |
![]() |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|