Parting out 69 Custom Camper LWB in NE PA (Wilkes Barre) - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**mark69** · 05-28-2008, 02:44 PM

OK Going to try this again now that spring is here and snow is gone.

1969 LWB Custom Camper

Bed $500.00
Fenders $50.00ea
Hood $50.00 nose has some bondo repair
Grill $50.00

Will be listing more parts as I remove them. Or email me with your needs

Engine and tranny are shot 350/350
Bed in good shape only small pinholes around fenders openings and holes near tailgate in corners
Tailgate in good condition with only small holes in one corner
All glass is good
floors, rockers and cab corners are shot as are trailing arms and frame
cheap repaint by PO but color is original

I can email more picts and can possibly meet/ deliver as I live in North Jersey. Truck is in NE PA near Wilkes Barre.

Will not ship the big stuff but will ship small stuff.

**ScottH** · 05-28-2008, 05:42 PM

Mark, interested in the grill and possibly front bumper (is the chrome peeling or is that a reflection?). Also does it have a seat? Possible to get more pics? Condition of doors? Any options?

Thanks.

Scott

blkboot · 05-28-2008, 05:57 PM

any pics of the rear bumper

**mark69** · 05-28-2008, 06:49 PM

Quote:

Originally Posted by ScottH

Mark, interested in the grill and possibly front bumper (is the chrome peeling or is that a reflection?). Also does it have a seat? Possible to get more pics? Condition of doors? Any options?

Thanks.

Scott

The chrome is peeling on the bumper and because of the bondo on the front of the hood I assume the bumper is a re-pop and is not rusted through but the grill looks correct as all the hardware fits well (I started removing it this weekend) . I have what I believe is the original front bumper in white, and grill.

Doors are actually pretty good with only surface rust on the bottom from rubbing on the rockers.

I am going to use the seat.

**mark69** · 05-28-2008, 06:56 PM

Quote:

Originally Posted by blkboot

any pics of the rear bumper

More picts

396L35 · 05-28-2008, 07:10 PM

How nice are the mirrors??? Mark

Cyclone44 · 05-28-2008, 07:25 PM

How much for the glove box emblem and power steering brackets to 37918 ?And are the fender emblems any good? Thanks

**mark69** · 05-28-2008, 07:54 PM

Quote:

Originally Posted by 396L35

How nice are the mirrors??? Mark

They are a factory option so there are nuts welded on the doors so I would like them to go with the doors but will let you know....BTW they are frozen as the adjustment nuts and bolts are rusted but could be replaced to make them work the mirror glass is good.

**ScottH** · 05-28-2008, 07:55 PM

PM sent

jkaylor68gmc · 05-28-2008, 07:58 PM

wanna sell the steering wheel??????

I need it.

**mark69** · 05-28-2008, 07:59 PM

Quote:

Originally Posted by Cyclone44

How much for the glove box emblem and power steering brackets to 37918 ?And are the fender emblems any good? Thanks

Only have the drivers emblem in good shape passenger is gone except for the 350 emblem $25.00
Bracket $10.00
Glove box emblem $10.00

$10.00 By UPS Ground for everything

**mark69** · 05-28-2008, 08:01 PM

Quote:

Originally Posted by jkaylor68gmc

wanna sell the steering wheel??????

I need it.

Would really like to sell it with the Column the column is really nice as the ignition is in the dash. But will get a pict of it next week.

*gn4u2c2* · 05-28-2008, 08:15 PM

pics of mirrors please

jkaylor68gmc · 05-28-2008, 08:18 PM

sorry, I really don't need a column.

**mark69** · 05-28-2008, 08:23 PM

Quote:

Originally Posted by gn4u2c2

pics of mirrors please

OK will post next week.

72BlckButy · 05-28-2008, 09:30 PM

How does the radio look? Work? AM/FM? Price? If you could snap a few pics that would be awesome!

**too much stuff** · 05-29-2008, 12:58 AM

Any hubcaps left on it?

Cyclone44 · 05-29-2008, 01:03 AM

Bracket $10.00
Glove box emblem $10.00

$10.00 By UPS Ground for everything[/QUOTE]

Can I get a picture of the glove box emblem and the power steering brackets...Thanks

**mark69** · 05-29-2008, 01:29 AM

Quote:

Originally Posted by 72BlckButy

How does the radio look? Work? AM/FM? Price? If you could snap a few pics that would be awesome!

AM doesn't work but in excellent shape w/ orig knobs Picts next week.

**jaros44sr** · 05-29-2008, 01:30 AM

put me next in line for the radio, price? Is that an original dash pad and is it available?

**mark69** · 05-29-2008, 01:30 AM

Quote:

Originally Posted by Cyclone44

Bracket $10.00
Glove box emblem $10.00

$10.00 By UPS Ground for everything

Can I get a picture of the glove box emblem and the power steering brackets...Thanks[/QUOTE]

Picts next week

**mark69** · 05-29-2008, 01:31 AM

Quote:

Originally Posted by too much stuff

Any hubcaps left on it?

I have several original hubcaps will get picts next week.

**mark69** · 05-29-2008, 01:32 AM

Quote:

Originally Posted by jkaylor68gmc

sorry, I really don't need a column.

have someone interested in the column only so I will pull the steering wheel and take picts next week.

**mark69** · 05-29-2008, 01:34 AM

Quote:

Originally Posted by jaros44sr

put me next in line for the radio, price? Is that an original dash pad and is it available?

Dash pad is original with a few small cracks, you are second in line.

Cyclone44 · 05-29-2008, 01:51 AM

Thanks, Will you please PM me when you post the pictures???

05-28-2008, 02:44 PM	#1
mark69 I'm back did you miss me? Join Date: Jul 2006 Location: New Jersey Posts: 60	Parting out 69 Custom Camper LWB in NE PA (Wilkes Barre) OK Going to try this again now that spring is here and snow is gone. 1969 LWB Custom Camper Bed $500.00 Fenders $50.00ea Hood $50.00 nose has some bondo repair Grill $50.00 Will be listing more parts as I remove them. Or email me with your needs Engine and tranny are shot 350/350 Bed in good shape only small pinholes around fenders openings and holes near tailgate in corners Tailgate in good condition with only small holes in one corner All glass is good floors, rockers and cab corners are shot as are trailing arms and frame cheap repaint by PO but color is original I can email more picts and can possibly meet/ deliver as I live in North Jersey. Truck is in NE PA near Wilkes Barre. Will not ship the big stuff but will ship small stuff. Attached Images __________________ 1984 C10 Shorty 250 Inliner 1969 Custom Camper/20 GONE(but not forgotten). 1976 C20 with 292L6 36K original miles now 41K. SOLD 87 Chevy P30 stepvan 6.2L diesel 140K (SOLD)

05-28-2008, 05:42 PM	#2
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,187	Re: Parting out 69 Custom Camper LWB in NE PA (Wilkes Barre) Mark, interested in the grill and possibly front bumper (is the chrome peeling or is that a reflection?). Also does it have a seat? Possible to get more pics? Condition of doors? Any options? Thanks. Scott __________________ 1963 C10 swb fleetside 1966 GMC G1000 Handi-bus (future project) 1955 Chevy 2 dr. wagon Last edited by ScottH; 05-28-2008 at 05:44 PM.

05-28-2008, 05:57 PM	#3
blkboot Registered User Join Date: Aug 2007 Location: washington GA Posts: 197	Re: Parting out 69 Custom Camper LWB in NE PA (Wilkes Barre) any pics of the rear bumper

05-28-2008, 07:10 PM	#6
396L35 Registered User Join Date: Mar 2007 Location: Missouri Posts: 41	Re: Parting out 69 Custom Camper LWB in NE PA (Wilkes Barre) How nice are the mirrors??? Mark

05-28-2008, 07:25 PM	#7
Cyclone44 Step Brother Join Date: Sep 2007 Location: K-town Posts: 4,029	Re: Parting out 69 Custom Camper LWB in NE PA (Wilkes Barre) How much for the glove box emblem and power steering brackets to 37918 ?And are the fender emblems any good? Thanks

05-28-2008, 07:55 PM	#9
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,187	Re: Parting out 69 Custom Camper LWB in NE PA (Wilkes Barre) PM sent __________________ 1963 C10 swb fleetside 1966 GMC G1000 Handi-bus (future project) 1955 Chevy 2 dr. wagon

05-28-2008, 07:58 PM	#10
jkaylor68gmc Senior Member Join Date: Dec 2005 Location: TN Posts: 2,448	Re: Parting out 69 Custom Camper LWB in NE PA (Wilkes Barre) wanna sell the steering wheel?????? I need it. __________________ 1947 International KB-1 1957 Chevy Bel-Air riding low 1962 swb fleetside 2002 Chevrolet Silverado 7-inch lift on 35 Daily driver 2016 Chevy Tahoe Better halves ride

05-28-2008, 08:15 PM	#13
gn4u2c2 Account Suspended Join Date: Jul 2006 Location: d.c Posts: 315	Re: Parting out 69 Custom Camper LWB in NE PA (Wilkes Barre) pics of mirrors please

05-28-2008, 08:18 PM	#14
jkaylor68gmc Senior Member Join Date: Dec 2005 Location: TN Posts: 2,448	Re: Parting out 69 Custom Camper LWB in NE PA (Wilkes Barre) sorry, I really don't need a column. __________________ 1947 International KB-1 1957 Chevy Bel-Air riding low 1962 swb fleetside 2002 Chevrolet Silverado 7-inch lift on 35 Daily driver 2016 Chevy Tahoe Better halves ride

05-28-2008, 09:30 PM	#16
72BlckButy Tot Roddin' Join Date: Apr 2005 Location: Mid-MO Posts: 24,461	Re: Parting out 69 Custom Camper LWB in NE PA (Wilkes Barre) How does the radio look? Work? AM/FM? Price? If you could snap a few pics that would be awesome! __________________ -Nate 1969 CST SWB - Project Blank Slate (4.5/6" ECE Static Drop, 6-lug disc brake upgrade (manual), Billet Specialties Vintec 20x8.5 255/40 (F) 20x10 295/40 (R), 250 I-6) 1960 AMF Skylark - Tot Roddin' (Lowered with custom frame; soon to include custom push bar and interior) 2008 Silverado CrewCab 1LT (5.3L, 3:73, 4x4, LT1, Z-71, Towing Package)

05-29-2008, 12:58 AM	#17
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,721	Re: Parting out 69 Custom Camper LWB in NE PA (Wilkes Barre) Any hubcaps left on it? __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

05-29-2008, 01:03 AM	#18
Cyclone44 Step Brother Join Date: Sep 2007 Location: K-town Posts: 4,029	Re: Parting out 69 Custom Camper LWB in NE PA (Wilkes Barre) Bracket $10.00 Glove box emblem $10.00 $10.00 By UPS Ground for everything[/QUOTE] Can I get a picture of the glove box emblem and the power steering brackets...Thanks

05-29-2008, 01:30 AM	#20
jaros44sr Senior Member Join Date: May 2006 Location: Philadelphia, Pa. 19454 Posts: 9,502	Re: Parting out 69 Custom Camper LWB in NE PA (Wilkes Barre) put me next in line for the radio, price? Is that an original dash pad and is it available? __________________ Semper Fi...Uncle Sam, you da man All parts offered to help are free, unless otherwise noted Dont try this stuff in my build thread, unless you have 55 years of mechanical OTJ training SAFETY FIRST AS usual, off topic They say your mind goes second, can't remember the first Jim Last edited by jaros44sr; 05-29-2008 at 01:32 AM.

05-29-2008, 01:51 AM	#25
Cyclone44 Step Brother Join Date: Sep 2007 Location: K-town Posts: 4,029	Re: Parting out 69 Custom Camper LWB in NE PA (Wilkes Barre) Thanks, Will you please PM me when you post the pictures???

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.