Pictures of new exhaust system - The 1947 - Present Chevrolet & GMC Truck Message Board Network

fastom · 06-07-2008, 08:46 PM

Just had the exhaust system installed. It's quite at idle, haven't driven the truck yet. It can be very load, just have to open the cutouts!!

tcb-1 · 06-07-2008, 08:48 PM

actuated turnouts too! very, very nice and clean!!!!!

Riveted1 · 06-07-2008, 08:53 PM

Wow that looks really nice!

72BlckButy · 06-07-2008, 09:06 PM

Now I'm diggin' the electric cut-outs!

Nice exhaust!

Okay... I need a memory refresher, what kind of lowering kit are you running?

fastom · 06-07-2008, 09:36 PM

The suspension is all Early Classic stuff, 4-6 drop.

68alltheway · 06-07-2008, 09:50 PM

where'd you ge the cut outs from

**70C10Toejam** · 06-07-2008, 09:52 PM

Nice!

Like the cutouts.

fastom · 06-07-2008, 10:07 PM

Cutouts!!
http://store.summitracing.com/partde...5&autoview=sku

**Hart_Rod** · 06-07-2008, 10:14 PM

Pretty cool! Where you forced to go under the axle? Do you have a better picture of the cut-outs? Did they come with the turndowns?

72BlckButy · 06-07-2008, 10:56 PM

I'm guessing the answer will be no, but do you think you will have any issues with the exhaust rubbing since it was run below the rear axle? I'm planning on a 4/6 kit on my truck and would like to have it piped to the rear of the truck, but I think I will have to opt for something like this, or dumping before the rear axle.

Again, sweet setup!

chrislehr · 06-07-2008, 11:02 PM

friggin sweeeet.

Now for video of with and without cutouts!

fastom · 06-08-2008, 12:22 AM

The pictures I took of the exhaust is on a two poster lift, the exhaust is not hitting when on the lift.

The turn down pipes on the cut outs didn't come with them, they were made by the guy that did the exhaust.

renegade8720 · 06-08-2008, 01:12 AM

Very nice looking exhaust! Which shorty headers are you using? Are you running a 350? I was thinking of ordering the same cutouts. Are you happy with them?

Thanks,
Renegade

fastom · 06-08-2008, 01:28 AM

Headers are Sanderson, motor is a ZZ383 GM unit.

The cutouts are working, that makes me happy.

Sport/Truck · 06-08-2008, 09:42 AM

What mufflers are you using? The exhaust looks real clean....Uh, the whole truck looks clean!. Nice work.
s/t

thirdstreettito · 06-08-2008, 04:23 PM

Whats the diameter of the entire system?

68Stepbed · 06-09-2008, 04:37 PM

Quote:

Originally Posted by fastom

The cutouts are working, that makes me happy.

But not the neighbors, I'm sure.

Ford Assassin · 08-14-2008, 11:25 AM

Quote:

Originally Posted by thirdstreettito

Whats the diameter of the entire system?

I wanna know too!

fastom · 08-14-2008, 01:16 PM

The system is 2 1/2, the mufflers are MagnaFlow.

VanceH · 08-14-2008, 01:25 PM

I want to hear it!!!!! Very nice job!!

Sequoyah · 08-14-2008, 02:52 PM

very nice!

70rs/ss · 08-14-2008, 03:21 PM

If you lower these you get into a very tight corner as far as routing the pipe up and over the rear axle. I have seen couple of my truck buddies, with the pipe jumping outside the frame rail and up into the rear wheel housing then over the rear and out of the back.

ap2002 · 08-14-2008, 07:01 PM

looks good

70c10 · 08-14-2008, 07:39 PM

Very cool Tom

Love the cutouts. Are those mufflers offset/offset or offset/center?

Jcentsr6 · 08-14-2008, 08:03 PM

Looks Good;

06-07-2008, 08:46 PM	#1
fastom That's right, it's Copper!! Join Date: May 2007 Location: Bakersfield, Central California Posts: 558	Pictures of new exhaust system Just had the exhaust system installed. It's quite at idle, haven't driven the truck yet. It can be very load, just have to open the cutouts!! Attached Images

06-07-2008, 08:48 PM	#2
tcb-1 Nothing to see here..... Join Date: Jun 2007 Location: Shawnee, KS Posts: 4,625	Re: Pictures of new exhaust system actuated turnouts too! very, very nice and clean!!!!! __________________ Doug THANK YOU to our American Soldiers & Veterans - POW MIA "You will NEVER be forgotten". The democracy will cease to exist when you take away from those who are willing to work and give to those who would not. Thomas Jefferson Last edited by tcb-1; 06-07-2008 at 08:48 PM.

06-07-2008, 08:53 PM	#3
Riveted1 Tasty Cakes! Join Date: Apr 2003 Location: Gilbert, AZ Posts: 2,112	Re: Pictures of new exhaust system Wow that looks really nice! __________________ I'm a little and a lot Ground beef: A cow with no legs. ---------------- '66 Chevy SWB "Penny" '67 Chevy Big Window SWB- aka "Pearl" '72 Burb- "Betty" "It's not a hearse dammit" '99 Chevy Ext. cab Silverado

06-07-2008, 09:06 PM	#4
72BlckButy Tot Roddin' Join Date: Apr 2005 Location: Mid-MO Posts: 24,461	Re: Pictures of new exhaust system Now I'm diggin' the electric cut-outs! Nice exhaust! Okay... I need a memory refresher, what kind of lowering kit are you running? __________________ -Nate 1969 CST SWB - Project Blank Slate (4.5/6" ECE Static Drop, 6-lug disc brake upgrade (manual), Billet Specialties Vintec 20x8.5 255/40 (F) 20x10 295/40 (R), 250 I-6) 1960 AMF Skylark - Tot Roddin' (Lowered with custom frame; soon to include custom push bar and interior) 2008 Silverado CrewCab 1LT (5.3L, 3:73, 4x4, LT1, Z-71, Towing Package)

06-07-2008, 09:36 PM	#5
fastom That's right, it's Copper!! Join Date: May 2007 Location: Bakersfield, Central California Posts: 558	Re: Pictures of new exhaust system The suspension is all Early Classic stuff, 4-6 drop.

06-07-2008, 09:50 PM	#6
68alltheway drive it till it dies Join Date: Apr 2007 Location: Larose, LA Posts: 274	Re: Pictures of new exhaust system where'd you ge the cut outs from __________________ live life to the fullest

06-07-2008, 09:52 PM	#7
70C10Toejam Hellasick Join Date: Jul 2006 Location: Death Moans, IA Posts: 876	Re: Pictures of new exhaust system Nice! Like the cutouts. __________________ I keep two MAGNUMS in my desk. One's a gun, and I keep it loaded. The other's a bottle and it keeps ME loaded. I'm Tracer Bullet. (Calvin and Hobbes) This life was a test. It was only a test. If this had been an actual life, you would have received instructions on where to go and what to do. RED meat is not bad for you...FUZZY BLUE/GREEN MEAT is bad for you!!!!!!!!!!!!! BUILT FORD TOUGH WITH CHEVY STUFF--sticker at Goodguys

06-07-2008, 10:07 PM	#8
fastom That's right, it's Copper!! Join Date: May 2007 Location: Bakersfield, Central California Posts: 558	Re: Pictures of new exhaust system Cutouts!! http://store.summitracing.com/partde...5&autoview=sku

06-07-2008, 10:14 PM	#9
Hart_Rod ************* Join Date: Apr 2005 Location: Pensacola, FL Posts: 17,858	Re: Pictures of new exhaust system Pretty cool! Where you forced to go under the axle? Do you have a better picture of the cut-outs? Did they come with the turndowns? __________________ Rob - https://www.instagram.com/hart_rod_c10 As Iron Sharpens Iron, So One Man Sharpens Another. Proverbs 27:17 FOR SALE: DBW pedal bracket - http://67-72chevytrucks.com/vboard/s...d.php?t=651123 FOR SALE: Hood Brackets http://67-72chevytrucks.com/vboard/s...d.php?t=679945 1987 Silverado SWB - 34.5K original miles http://67-72chevytrucks.com/vboard/s...d.php?t=801834 1969 SuperBurb - http://67-72chevytrucks.com/vboard/s...d.php?t=200387 1968 Farm truck - http://67-72chevytrucks.com/vboard/s...d.php?t=358692 1968 SWB - http://67-72chevytrucks.com/vboard/s...d.php?t=551258 1948 Chevy - http://67-72chevytrucks.com/vboard/s...=122164&page=3

06-07-2008, 10:56 PM	#10
72BlckButy Tot Roddin' Join Date: Apr 2005 Location: Mid-MO Posts: 24,461	Re: Pictures of new exhaust system I'm guessing the answer will be no, but do you think you will have any issues with the exhaust rubbing since it was run below the rear axle? I'm planning on a 4/6 kit on my truck and would like to have it piped to the rear of the truck, but I think I will have to opt for something like this, or dumping before the rear axle. Again, sweet setup! __________________ -Nate 1969 CST SWB - Project Blank Slate (4.5/6" ECE Static Drop, 6-lug disc brake upgrade (manual), Billet Specialties Vintec 20x8.5 255/40 (F) 20x10 295/40 (R), 250 I-6) 1960 AMF Skylark - Tot Roddin' (Lowered with custom frame; soon to include custom push bar and interior) 2008 Silverado CrewCab 1LT (5.3L, 3:73, 4x4, LT1, Z-71, Towing Package)

06-07-2008, 11:02 PM	#11
chrislehr Engine n00b Join Date: Feb 2008 Location: Austin Posts: 1,031	Re: Pictures of new exhaust system friggin sweeeet. Now for video of with and without cutouts!

06-08-2008, 12:22 AM	#12
fastom That's right, it's Copper!! Join Date: May 2007 Location: Bakersfield, Central California Posts: 558	Re: Pictures of new exhaust system The pictures I took of the exhaust is on a two poster lift, the exhaust is not hitting when on the lift. The turn down pipes on the cut outs didn't come with them, they were made by the guy that did the exhaust.

06-08-2008, 01:12 AM	#13
renegade8720 Registered User Join Date: Nov 2007 Location: Kingsport, TN Posts: 193	Re: Pictures of new exhaust system Very nice looking exhaust! Which shorty headers are you using? Are you running a 350? I was thinking of ordering the same cutouts. Are you happy with them? Thanks, Renegade

06-08-2008, 01:28 AM	#14
fastom That's right, it's Copper!! Join Date: May 2007 Location: Bakersfield, Central California Posts: 558	Re: Pictures of new exhaust system Headers are Sanderson, motor is a ZZ383 GM unit. The cutouts are working, that makes me happy.

06-08-2008, 09:42 AM	#15
Sport/Truck Sierra Grande Club Join Date: Jan 2007 Location: New Mexico USA Posts: 2,433	Re: Pictures of new exhaust system What mufflers are you using? The exhaust looks real clean....Uh, the whole truck looks clean!. Nice work. s/t __________________ 1971 GMC Sierra Grande, 1/2 ton short wide, original 4 bolt 010 020 block & heads. (matching #'s). 383 stroker, SMI q jet 750 cfm, Lunati Voodoo 60102 cam, Scorpion roller rockers, Spin Tech pro street mufflers with X pipe.



Register or Log In To remove these advertisements.

06-08-2008, 04:23 PM	#16
thirdstreettito Resident of Here Join Date: May 2008 Location: Wesley Chapel, FL, USA Posts: 7,716	Re: Pictures of new exhaust system Whats the diameter of the entire system? __________________ ~Bradley~ 2004 Black GTO LS2/T56 too much to list Miss having a truck

08-14-2008, 01:16 PM	#19
fastom That's right, it's Copper!! Join Date: May 2007 Location: Bakersfield, Central California Posts: 558	Re: Pictures of new exhaust system The system is 2 1/2, the mufflers are MagnaFlow.

08-14-2008, 01:25 PM	#20
VanceH Loving the Jimmster Join Date: Jun 2008 Location: Emmett, idaho Posts: 575	Re: Pictures of new exhaust system I want to hear it!!!!! Very nice job!!

08-14-2008, 02:52 PM	#21
Sequoyah so easy a caveman can do it... Join Date: May 2006 Location: Albuquerque, NM Posts: 419	Re: Pictures of new exhaust system very nice! __________________ My build thread http://67-72chevytrucks.com/vboard/s...d.php?t=242380

08-14-2008, 03:21 PM	#22
70rs/ss Registered User Join Date: Dec 2004 Location: Northern AZ Posts: 7,270	Re: Pictures of new exhaust system If you lower these you get into a very tight corner as far as routing the pipe up and over the rear axle. I have seen couple of my truck buddies, with the pipe jumping outside the frame rail and up into the rear wheel housing then over the rear and out of the back.

08-14-2008, 07:01 PM	#23
ap2002 Registered User Join Date: Apr 2008 Location: Houston, TX Posts: 247	Re: Pictures of new exhaust system looks good __________________ 1971 C-10 SWB - LS swap w/4L60e, 20x8.5front 20x12rear, 1968 C-10 SWB - 454 BB TH350 -Gone!

08-14-2008, 07:39 PM	#24
70c10 67-72 Addict! Join Date: Feb 2002 Location: The TAX State! Posts: 7,856	Re: Pictures of new exhaust system Very cool Tom Love the cutouts. Are those mufflers offset/offset or offset/center? __________________ Jim 1970 C/10 Fleetside w/Ghost Flames Lowered 4.5" front and 4" rear (Raked) 355/350 Turbo w/shift kit 10" Redneck Performance Verter w/2500 stall Hooker Super Comps part#2808-1 Performer RPM Air-Gap 12 Bolt w/3:73 gears- Eaton Posi Comp Cams XE262 with 1.6 Crane Energizers, Road Demon 625 and Brodix IK 180 heads

08-14-2008, 08:03 PM	#25
Jcentsr6 Junior Member Join Date: Jul 2007 Location: Odenton, Md Posts: 552	Re: Pictures of new exhaust system Looks Good; __________________ going to sell this one...looking for a SWB project next.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.