![]() |
![]() |
#1 |
Registered User
![]() Join Date: Sep 2001
Location: Fort Wayne, Indiana, USA
Posts: 1,887
|
Help Wanted
Is there anyone out there that can do a great job of installing new rubber seals and track into a pair of wing windows? I don't have the experience with blind rivets. Someone that has done many would likely do a much better job.
Thanks! |
![]() |
![]() |
![]() |
#2 |
Registered User
Join Date: Feb 2004
Location: Indiana
Posts: 158
|
Re: Help Wanted
I've done it and won't do it again, it really takes two people, one to hold everything together and one to smash the rivets
|
![]() |
![]() |
![]() |
#3 |
I am a Referee of life.
Join Date: Jun 2000
Location: Greensboro N.C.
Posts: 13,993
|
Re: Help Wanted
If I can do it you can.The division bar channel anyway.I used a small spacer made of copper tubing.I used regular pop rivets and put the spacer over the rod of the rivet.I lined everything up and made sure the rivet was seated in the bottom of the new felt and that the felt was in the bottom of the channel.Then I just crimped the rivet.
I haven't tried the rubbers yet.
__________________
The 47-present Chevrolet and GMC Truck Message Board Network,it's owners,moderators,members,and associates of any type should not be held responsible for my opinion. You can't fix stupid,not even with duct tape. "My appearance is due to the fact that "GOD" does punish you for having too much fun!" Barrett-Jackson has perfected alchemy,they make rust into gold! "You can lead a horse to water but you can't saddle a duck" "Cleverly disguised as a 'Responsible Adult' "Sometimes your Knight in shining armor is just a retard in tinfoil" |
![]() |
![]() |
![]() |
#4 |
Registered User
Join Date: Apr 2000
Location: Bonne Terre, Mo
Posts: 3,005
|
Re: Help Wanted
The single most difficult thing on the truck to do. And the rubbers don't want to make it easy. Would rather get in a bar fight than try another set.
__________________
'69 Chevy Long Fleet & '71 GMC Short Step & Project "ODD BALL" "You can wash a pig, soak it in most expensive perfume. In the end it is still just a pig." ODD BALL build thread http://67-72chevytrucks.com/vboard/s...d.php?t=478629" |
![]() |
![]() |
![]() |
#5 |
'71 chevy s.bed/s.side
![]() Join Date: Mar 2005
Location: Chesapeake, VA
Posts: 1,571
|
Re: Help Wanted
Just finished mine last week. Used the blind rivets. The windows turned out near perfect, but it is a 2 person job and by far, the most difficult task on this rebuild, and it's a frame off. Would not do it again!
With that being said, Dantip, go for it, you can do it. take your time and keep your cool. Good luck.
__________________
STILL PLAYS WITH CARS...AND TRUCKS!! Parents! Be good to your kids...they get to choose your nursing home! 250 I-6 with a 3 speed Saginaw and Borg Warner Overdrive...She's got overdrive! |
![]() |
![]() |
![]() |
#6 |
Registered User
![]() Join Date: Sep 2001
Location: Fort Wayne, Indiana, USA
Posts: 1,887
|
Re: Help Wanted
Thanks for the encouragement! I did this once years ago and I must be having bad flashbacks. If no one offers this service I will need to find a willing accompolis and at least a 12-pack and go for it.
Any other technical advice? |
![]() |
![]() |
![]() |
#7 | |
Restoration Virgin!
Join Date: Jan 2008
Location: Huntersville, NC
Posts: 8,298
|
Re: Help Wanted
Quote:
![]() And like Panel said....heck if I can do them anyone can do them....get a helper!!!....good luck!!!
__________________
Geoff with a G 1968 Chevy C10 SWB The Mistress 1972 Custom Deluxe C20 Suburban A Suburban Named Isabella 1966 Ford Mustang Mama's High School Graduation Present |
|
![]() |
![]() |
![]() |
#8 |
Registered User
Join Date: Aug 2007
Location: pittsburgh pa
Posts: 1,970
|
Re: Help Wanted
Almost the entire reason I went with 1 piece windows on my 68.... Between that and the money to rechrome the frames.....
__________________
68 C10 Shorty TPI,Bagged, and all the good stuff. Classic trucks feature June 06, On the cover of Jegs Christmas Catalog 08 67 C10 Shorty Shop truck project Bagged and Z'd under destruction and getting nowhere fast. 64 C10 Shop Truck/Daily driver, Bagged, Dropmember, SOLD!!!! Gone but not forgotten.. 54 GMC under the knife getting a S10 chassis swap and bagged. See my build thread... 07 GMC Sierra 5/7 drop, 22's and 24's Air ride on my mind.. http://67-72chevytrucks.com/vboard/s...d.php?t=339340 See pics of my trucks in my profile |
![]() |
![]() |
![]() |
#9 |
Registered User
Join Date: Jul 2000
Location: Victoria,BC, Canada
Posts: 1,300
|
Re: Help Wanted
I just did a test fit fith my new repro vent window assemblies, I found to my amazement the fit perfectly. I intend to practice the installation with my cab in primer so when the new paint is on I won't mess it up.
It's better to rebuild originals but the repros are pretty damn good just sos ya know.
__________________
71 GMC 1500 LWB |
![]() |
![]() |
![]() |
#10 | |
Registered User
![]() Join Date: Jan 2007
Location: Poplar Bluff, MO
Posts: 1,502
|
Re: Help Wanted
Quote:
|
|
![]() |
![]() |
![]() |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|