need help with 3 speed transmission mount and driveshaft - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Mark B · 07-02-2008, 10:43 AM

I have a 3 on the tree and 250 six in a SWB leaf spring truck.

Does anyone know how or if the tranny is supposed to be mounted to the frame? Right now it is unsupported.

This is a shortened LWB truck. The orginal truck had a 2 piece driveshaft with a crossmember that supported the end of the first shaft back from the tranny. It has a single shaft now, and that crossmember has been partially cut away to make clearance for the driveshaft. The crossmember doesn't support anything at all now. The only drivetrain support are the engine mounts, and I think that is causing some drivability problems.

Any pictures of how this should look would be great.

thanks
Mark

my70chevyc10 · 07-02-2008, 11:18 AM

On the three speed the trans mount is mounted to the frame near the bellhousing unlike automatics they have the mount at the tail of the trans. The three speed has 2 big mounts 1 on eatherside of the bellhousing that takes a special frame mounts to atatch it to the frame i have pics of the mounts and bellhousing if you want them.

samwise68 · 07-02-2008, 11:25 AM

Yup.

Three speeds only have the bellhousing mounts - no tailshaft crosmember. they're light enough that they don't really need it - or atleast thats the thinking from the factory, i guess?

It hasn't been an issue in my truck, at least.

-Sam.

Mt Man Chad · 07-02-2008, 11:37 AM

Mine trans is unsupported with a 1 pc drive shaft and 3 on the tree.

07-02-2008, 10:43 AM	#1
Mark B Registered User Join Date: Oct 2005 Location: Ontario, Canada Posts: 145	need help with 3 speed transmission mount and driveshaft I have a 3 on the tree and 250 six in a SWB leaf spring truck. Does anyone know how or if the tranny is supposed to be mounted to the frame? Right now it is unsupported. This is a shortened LWB truck. The orginal truck had a 2 piece driveshaft with a crossmember that supported the end of the first shaft back from the tranny. It has a single shaft now, and that crossmember has been partially cut away to make clearance for the driveshaft. The crossmember doesn't support anything at all now. The only drivetrain support are the engine mounts, and I think that is causing some drivability problems. Any pictures of how this should look would be great. thanks Mark

07-02-2008, 11:18 AM	#2
my70chevyc10 Registered User Join Date: Jul 2007 Location: Covina Calif Posts: 172	Re: need help with 3 speed transmission mount and driveshaft On the three speed the trans mount is mounted to the frame near the bellhousing unlike automatics they have the mount at the tail of the trans. The three speed has 2 big mounts 1 on eatherside of the bellhousing that takes a special frame mounts to atatch it to the frame i have pics of the mounts and bellhousing if you want them. __________________ "Your trucks fast! You must have been going 120 when I passed you." "Owning A 10 Sec Import Is Like Coming Out Of The Closet, In The End Ur Still Gay" If for some reason i loose to a import...At least i can go home knowing the vehicle i drive drops girls panties...

07-02-2008, 11:37 AM	#4
Mt Man Chad Registered User Join Date: Oct 2006 Location: Oakridge Oregon Posts: 1,864	Re: need help with 3 speed transmission mount and driveshaft Mine trans is unsupported with a 1 pc drive shaft and 3 on the tree. Attached Images __________________ 68 CST SWB - Gold/White 50th anniversary /TH350/Buddy Buckets/3.73 Posi/dogdish caps. 68 K10 Burb - Gold/White 327/SM465/NP205/3.73 "Daa Burb" build thread

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.