350 roller motor, vortec heads,4 carb set up

[bigarmzz]

(been awhile since i've been on here)

i'm selling a 350 complete engine, it was originally out of a 96 truck, i had my engine builder (very well known around here) completely rebuilt it, it only had 33k miles on it-thus why i originally bought it....

..standard bore, (had "0" wear in the cylinders),.has new rods, pistons (stock-something like 9:5:1) new GM performance roller cam (same as ram jet 350) , new timing chain/gears, new cam bearings, main bearings, new oil pump, new GM oil pan, roller lifters, new GM harmonic balancer

completely re-done vortec heads, new springs (good for 500 lift), new retainers, locks, etc...ALL parts bought from pace performance parts dot com

block came drilled for mechanical fuel pump, and the cam has the lobe for a mechanical pump as well, and has older style timing cover

comes with the hardened distributor gear for the roller cam, and new GM performance parts chrome valve covers

needs only an intake, and distributor

i have quite abit of $ in this, but i'll sell it for $1k firm

i'll try and post up some pics in the next day or so if there's any interest, i'd rather not ship, i'm in elkins west virginia, my zip is 26241
thanks
klambert@cebridge.net

[bigarmzz]

bumpin this one up

new price, complete roller motor, $900

[bigarmzz]

i'm selling a 350 complete engine, it was originally out of a 96 truck, i had my engine builder (very well known around here) completely rebuilt it, it only had 33k miles on it-thus why i originally bought it....

..standard bore, (had "0" wear in the cylinders),.has new rods, pistons (stock-something like 9:5:1) new GM performance roller cam (same as ram jet 350) , new timing chain/gears, new cam bearings, main bearings, new oil pump, new GM oil pan, roller lifters, new GM harmonic balancer

completely re-done vortec heads, new springs (good for 500 lift), new retainers, locks, etc...ALL parts bought from pace performance parts dot com

block came drilled for mechanical fuel pump, and the cam has the lobe for a mechanical pump as well, and has older style timing cover

comes with the hardened distributor gear for the roller cam, and new GM performance parts chrome valve covers

needs only an intake, and distributor

i have quite abit of $ in this, but i'll sell it for $900

i'll try and post up some pics in the next day or so if there's any interest, i'd rather not ship, i'm in elkins west virginia, my zip is 26241
thanks
klambert@cebridge.net

[70c10]

Wow, for $900 you can't go wrong

[bigarmzz]

Originally Posted by 70c10

Wow, for $900 you can't go wrong

thanks, i appreciate that

the person that buys this is going to be very happy

[meathead95]

how far are you from nashville. are you coming to the board meet?

[bigarmzz]

Originally Posted by meathead95

how far are you from nashville. are you coming to the board meet?

i'm not sure how far i am from there...i went ridin in the smokies a few weeks ago...(deals gap), so i know i'm about 4 hours northeast of Knoxville

i'd love to come to the board meet...unfortunately, i work a WHOLE lot, so time wont allow it, i wish it did, but it just doesnt

[GMan69]

Are you going to the Board Meet in Big Sandy, TN this weekend?

[VA72C10]

great deal...makes me reconsider building mine...do you have the specs on the cam and the receipts for the work?

[bigarmzz]

Originally Posted by VA72C10

great deal...makes me reconsider building mine...do you have the specs on the cam and the receipts for the work?

cam specs from pace performance:

Detailed Description

This hydraulic roller design is used on the 383 truck and Ramjet 350.

The duration at lash point in degrees (intake/exhaust) is 288/308; duration at .050" tappet lift (intake/exhaust) is 196/206 and maximum lift with 1.5:1 rocker ratio (intake/exhaust) is 431/451. Valve lash is zero/zero and lobe centerline is 109 degrees.

This camshaft is a great upgrade for 1996-2000 Chevy/GMC trucks equipped with the L31 Vortec 350 Engine. This cam is great for additional bottom end torque. If installed in one of these trucks, a custom computer re-program is needed.

i'm sure i probably have the receipts somewhere, just need to find them...i wasnt terrribly worried about keeping records, b/c, my plan wasnt (at the time) to sale the thing...but i'm sure i can find them though

[BBGMC]

can you ship it I live in portland Or 97217 is the zip

[bigarmzz]

Originally Posted by BBGMC

can you ship it I live in portland Or 97217 is the zip

i "would" be willing to ship it, but you'd need to make the arrangements......if this is something that you'd be interested in, pm me, and i'll give you a number to reach me at

[70rs/ss]

Man, if I hadn't just paid to get my 383 done, I'd buy this! on a side note I shipped a motor and trans from AZ to FL for a $300, it only takes a pallet and the truck comes by to pick it up.

[bigarmzz]

Originally Posted by 70rs/ss

Man, if I hadn't just paid to get my 383 done, I'd buy this! on a side note I shipped a motor and trans from AZ to FL for a $300, it only takes a pallet and the truck comes by to pick it up.

"a day late and a dollar short" huh? we both share that luck

i can pallet this up, no problem if someone wants to have it shipped

the only reason i'm selling this, is b/c i dont have anything to put it in anymore...i got into choppers and building bikes alittle over a year ago

...just a shame sitting on the stand like this

[VA72C10]

I will pass only because i want to do a 383 as well even though this is a KILLER deal!

[LONGHAIR]

Merged........please don't double post. You bumped up the old thread, then copy & pasted it into a new post in a different place....

From the rules.....

XIV. Multiple Posting - It is simply not acceptable to post your question more than once, or to post it in more than one forum. Choose the forum that your question or post best fits in, and place it there and only there. If, after posting, you feel it should be in another forum, private message the forum Moderator and ask if they would move it for you.

That said, if you would like this back in 73-87 (only) just ask, it can be done.

[bigarmzz]

Originally Posted by LONGHAIR

Merged........please don't double post. You bumped up the old thread, then copy & pasted it into a new post in a different place....

From the rules.....


That said, if you would like this back in 73-87 (only) just ask, it can be done.

i would have appreciated it if you would just have pm'd me about this, but you can go ahead and delete the other post, thank you

[VA72C10]

bump for you

[edin355]

Im in need of a motor.I dont know much about how this will fit in mine. I have a 72 swb with AC.Can this motor be ran without a computer and will it bolt in my truck without changing a lot. edin355

[bigarmzz]

motor is SOLD

thanks to all forum members!