72 GMC Bellcrank Pivot Stud - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Long&Low72 · 07-15-2008, 01:49 PM

Hi Hope someone can help me with this. I broke the pivot stud engine side on my bellcrank the other day and now I'm having trouble replacing it. I've found several but the all say its for a 4wd V8 I have a 2wd 250 I6. Is this part exchangeable. If not is there some way to rig it? Will the frame side work? Any help will be appreciated.

Luvlegs · 07-15-2008, 02:05 PM

Not sure about the interchangability but give me a day or two and pm me your address, I think I have one I'll send ya one for free (if you're in the US... where's Fitzgerald?) . I just have to make sure I still have it, it's good and the one you need.
Welcome to the board!

(the $25 a year dues are WELL worth it for the TON of info and help on this site and you can post Want to Buy and Sell)

70rs/ss · 07-15-2008, 02:26 PM

The 6 cylinder ball pivot is on a bracket, as opposed to the v8 one which threads into the block, so yes the 6 cylinder one is different. If it is just the ball stud that broke, you could make the v8 ball stud work on the 6 cylinder bracket, just drill out the hole in the bracket and run a nut down on the threads of the other ball. If the other member has one, good for you and I second the $25 supporter fee being worth every dime! A free part just asking is why I like the board.

Long&Low72 · 07-15-2008, 05:52 PM

My Address is:
G Crowe
124 Victory Dr
Fitzgerald, GA 31750

Man I appreciate it, you have no idea, and you can count on me paying that $25 supporter fee as soon as I can. I've never really gotten into the forums b4 this but now i think I'm hooked. Especially since this site is dedicated to the trucks I love.

Luvlegs · 07-21-2008, 09:16 PM

this is what will be in the mail tomorrow - hope it's right!

70rs/ss · 07-22-2008, 12:34 PM

I am pretty sure that is the l6 mount and ball stud. Cool of you to help out, rep points for you!

PanelDeland · 07-22-2008, 05:37 PM

I love this place.Members here do so many worthwhile things.
I was born with my family,married into in-laws,picked a few good friends over the years but I really stuck gold when I found this place.

Long&Low72 · 07-22-2008, 06:48 PM

Man I've never met people so willing to help out. I love this site, and the people are the best.

70rs/ss · 07-22-2008, 06:59 PM

Ditto on both posts above! I have given and recieved here, best group of friends a truck guy could ever have!!

cadiman67 · 12-27-2008, 09:25 AM

Quote:

Originally Posted by Long&Low72

I've found several but the all say its for a 4wd V8 I have a 2wd 250 I6. Is this part exchangeable. If not is there some way to rig it? Will the frame side work? Any help will be appreciated.

i have a '67 2wd 327 swap w/a 3speed, as stated above they all seem to be for 4wd. my truck has a bolt in the block now and would like to get a ball stud. is this 4wd ball stud the same???

07-15-2008, 01:49 PM	#1
Long&Low72 Registered User Join Date: Jul 2008 Location: Fitzgerald, GA Posts: 11	72 GMC Bellcrank Pivot Stud Hi Hope someone can help me with this. I broke the pivot stud engine side on my bellcrank the other day and now I'm having trouble replacing it. I've found several but the all say its for a 4wd V8 I have a 2wd 250 I6. Is this part exchangeable. If not is there some way to rig it? Will the frame side work? Any help will be appreciated.

07-15-2008, 02:05 PM	#2
Luvlegs Registered User Join Date: Sep 2005 Location: Smith Mountain Lake Virginia Posts: 1,537	Re: 72 GMC Bellcrank Pivot Stud Not sure about the interchangability but give me a day or two and pm me your address, I think I have one I'll send ya one for free (if you're in the US... where's Fitzgerald?) . I just have to make sure I still have it, it's good and the one you need. Welcome to the board! (the $25 a year dues are WELL worth it for the TON of info and help on this site and you can post Want to Buy and Sell) __________________ "A cat will almost always blink when hit between the eyes with a ball peen hammer" (you don't always have to state the obvious) Wear your PPE! You can eat with false teeth but you can't see with a false eye. 1959 Studebaker Silverhawk 350/400 1972 C10 L6 3OTT 2005 F350 - Built - whew!

07-15-2008, 02:26 PM	#3
70rs/ss Registered User Join Date: Dec 2004 Location: Northern AZ Posts: 7,271	Re: 72 GMC Bellcrank Pivot Stud The 6 cylinder ball pivot is on a bracket, as opposed to the v8 one which threads into the block, so yes the 6 cylinder one is different. If it is just the ball stud that broke, you could make the v8 ball stud work on the 6 cylinder bracket, just drill out the hole in the bracket and run a nut down on the threads of the other ball. If the other member has one, good for you and I second the $25 supporter fee being worth every dime! A free part just asking is why I like the board.

07-15-2008, 05:52 PM	#4
Long&Low72 Registered User Join Date: Jul 2008 Location: Fitzgerald, GA Posts: 11	Re: 72 GMC Bellcrank Pivot Stud My Address is: G Crowe 124 Victory Dr Fitzgerald, GA 31750 Man I appreciate it, you have no idea, and you can count on me paying that $25 supporter fee as soon as I can. I've never really gotten into the forums b4 this but now i think I'm hooked. Especially since this site is dedicated to the trucks I love.

07-21-2008, 09:16 PM	#5
Luvlegs Registered User Join Date: Sep 2005 Location: Smith Mountain Lake Virginia Posts: 1,537	Re: 72 GMC Bellcrank Pivot Stud this is what will be in the mail tomorrow - hope it's right! Attached Images __________________ "A cat will almost always blink when hit between the eyes with a ball peen hammer" (you don't always have to state the obvious) Wear your PPE! You can eat with false teeth but you can't see with a false eye. 1959 Studebaker Silverhawk 350/400 1972 C10 L6 3OTT 2005 F350 - Built - whew! Last edited by Luvlegs; 07-21-2008 at 09:20 PM.

07-22-2008, 12:34 PM	#6
70rs/ss Registered User Join Date: Dec 2004 Location: Northern AZ Posts: 7,271	Re: 72 GMC Bellcrank Pivot Stud I am pretty sure that is the l6 mount and ball stud. Cool of you to help out, rep points for you!

07-22-2008, 05:37 PM	#7
PanelDeland I am a Referee of life. Join Date: Jun 2000 Location: Greensboro N.C. Posts: 13,993	Re: 72 GMC Bellcrank Pivot Stud I love this place.Members here do so many worthwhile things. I was born with my family,married into in-laws,picked a few good friends over the years but I really stuck gold when I found this place. __________________ The 47-present Chevrolet and GMC Truck Message Board Network,it's owners,moderators,members,and associates of any type should not be held responsible for my opinion. You can't fix stupid,not even with duct tape. "My appearance is due to the fact that "GOD" does punish you for having too much fun!" Barrett-Jackson has perfected alchemy,they make rust into gold! "You can lead a horse to water but you can't saddle a duck" "Cleverly disguised as a 'Responsible Adult' "Sometimes your Knight in shining armor is just a retard in tinfoil"

07-22-2008, 06:48 PM	#8
Long&Low72 Registered User Join Date: Jul 2008 Location: Fitzgerald, GA Posts: 11	Re: 72 GMC Bellcrank Pivot Stud Man I've never met people so willing to help out. I love this site, and the people are the best. __________________ Live in each season as it passes; breathe the air, drink the drink, taste the fruit, and resign yourself to the influences of each. Henry David Thoreau

07-22-2008, 06:59 PM	#9
70rs/ss Registered User Join Date: Dec 2004 Location: Northern AZ Posts: 7,271	Re: 72 GMC Bellcrank Pivot Stud Ditto on both posts above! I have given and recieved here, best group of friends a truck guy could ever have!!

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.