H052/H072 No-Spin - The 1947 - Present Chevrolet & GMC Truck Message Board Network

1967k30 · 07-17-2008, 10:33 PM

I have an extra Detroit No-Spin for sale. I don't really want to sell it but if I can get $400 I'll let it go.

1967k30 · 07-20-2008, 10:10 AM

No one's looking for a No-Spin?

finch · 07-21-2008, 08:40 PM

kyle? lol

1967k30 · 07-24-2008, 09:41 AM

Hey Andy! Want to buy a No-Spin? We ended up with 4 or 5 and decided I could let one go.

Quote:

Originally Posted by finch

kyle? lol

finch · 07-25-2008, 04:52 PM

I really have no need for one right now, but I recognized your sig and it made me wonder if it was you haha.

1967k30 · 08-14-2008, 11:22 AM

$350

TuffGuy · 08-14-2008, 01:36 PM

Im new with cars maybe a stupid question but what is a no-spin

finch · 08-14-2008, 03:42 PM

locker/limited slip/posi hope that helps

*gn4u2c2* · 08-14-2008, 04:00 PM

They are nice to have but you can get them around here for $50.00

Ace in the hole · 08-14-2008, 06:43 PM

I would not mind having one but your a little to far away. What gears do they have?

wrangler94 · 08-15-2008, 09:25 AM

PM sent

wrangler94 · 08-21-2008, 09:47 PM

I'm definitely interested in it if you still want to sell it. I sent a PM the other day.

1967k30 · 10-02-2008, 10:18 AM

I replyed to my PM's. It'll fit in a flat rate box and ship for around $10.

1967k30 · 10-07-2008, 09:22 AM

Bump

1967k30 · 12-26-2008, 08:02 PM

$300 + Flat rate box.

**PICKMUP** · 12-26-2008, 10:44 PM

I assume this is the complete drop out center section? New or used?
Is this a clutch/posi unit or is it a ratchet type locker (Detroit Locker)?
Pictures are probably going to be needed to show exactly what you have & appearance/condition.

1967k30 · 12-26-2008, 11:36 PM

This is a No-Spin/Detroit Locker. There were never any posi's in Eaton rears.
It's used as nearly all of them are now. They haven't been in production in nearly 10yrs. I could supply a 3rd member for a little more but shipping will be much higher. Last one I shipped ran me $87.
I can get pic's if need be. Let me know if you want it and I'll tell ya where to send the money.

Quote:

Originally Posted by PICKMUP

I assume this is the complete drop out center section? New or used?
Is this a clutch/posi unit or is it a ratchet type locker (Detroit Locker)?
Pictures are probably going to be needed to show exactly what you have & appearance/condition.

STOCKISH · 12-27-2008, 12:21 AM

If it helps with your sale, this will also fit a GM 14 bolt rear if you use the side spider gears from the 14 bolt. And these are bulletproof. GL with the sale.

BBGMC · 12-27-2008, 03:35 AM

would that fit a dana 60

STOCKISH · 12-27-2008, 10:49 AM

No it wont. HO52/72 and 14 bolt only.

1967k30 · 12-27-2008, 12:02 PM

Will fit 14bolt if you use Eaton shafts as well.
Thanks for posting that.

Quote:

Originally Posted by 1972SuperCheyenne

If it helps with your sale, this will also fit a GM 14 bolt rear if you use the side spider gears from the 14 bolt. And these are bulletproof. GL with the sale.

1967k30 · 12-31-2008, 11:02 AM

Bump.

4x4longbed · 12-31-2008, 01:29 PM

Is this still for sale? What's your bottom dollar?

1967k30 · 01-01-2009, 10:46 AM

$300 + shipping.

Quote:

Originally Posted by 4x4longbed

Is this still for sale? What's your bottom dollar?

4x4longbed · 01-01-2009, 02:51 PM

I will give $250 and pay the freight. BTW is the the unit only or the whole center chunk ? I noticed in the previous threads you mentioned pictures, but i did not see any posted. Sorry if i missed them, I'm new to this site.

Thanks,
Jim

07-17-2008, 10:33 PM	#1
1967k30 Senior Member Join Date: Sep 2005 Location: NE Posts: 363	H052/H072 No-Spin I have an extra Detroit No-Spin for sale. I don't really want to sell it but if I can get $400 I'll let it go. __________________ 01 2500 Duramax,6spd,4x4,Not stock. Estimated 550rwhp/1100rwfp on fuel only. 03 3500 Duramax,6spd,4x4,Pac-Brake,not stock Estimated 500rwhp/1000rwfp fuel only 67 K10 in many pieces Little Brothers truck 67 K20 Cummins 12V/NV4500/205, D60/Eaton w/ Detroit,37" Xterrains,crossover steering, Future plans,Twins and lots of fuel.

07-20-2008, 10:10 AM	#2
1967k30 Senior Member Join Date: Sep 2005 Location: NE Posts: 363	Re: H052/H072 No-Spin No one's looking for a No-Spin? __________________ 01 2500 Duramax,6spd,4x4,Not stock. Estimated 550rwhp/1100rwfp on fuel only. 03 3500 Duramax,6spd,4x4,Pac-Brake,not stock Estimated 500rwhp/1000rwfp fuel only 67 K10 in many pieces Little Brothers truck 67 K20 Cummins 12V/NV4500/205, D60/Eaton w/ Detroit,37" Xterrains,crossover steering, Future plans,Twins and lots of fuel.

07-21-2008, 08:40 PM	#3
finch Registered User Join Date: Dec 2007 Location: Sioux Falls, SD Posts: 365	Re: H052/H072 No-Spin kyle? lol __________________ Andy... '70 C/10 Under Construction http://67-72chevytrucks.com/vboard/s...d.php?t=298553 '71 K/20 Frame-off resto, SOLD!!! http://67-72chevytrucks.com/vboard/c...ct=2399&cat=12 '05 Silverado Z-71, CC SB, Daily Driver

07-25-2008, 04:52 PM	#5
finch Registered User Join Date: Dec 2007 Location: Sioux Falls, SD Posts: 365	Re: H052/H072 No-Spin I really have no need for one right now, but I recognized your sig and it made me wonder if it was you haha. __________________ Andy... '70 C/10 Under Construction http://67-72chevytrucks.com/vboard/s...d.php?t=298553 '71 K/20 Frame-off resto, SOLD!!! http://67-72chevytrucks.com/vboard/c...ct=2399&cat=12 '05 Silverado Z-71, CC SB, Daily Driver

08-14-2008, 11:22 AM	#6
1967k30 Senior Member Join Date: Sep 2005 Location: NE Posts: 363	Re: H052/H072 No-Spin $350 __________________ 01 2500 Duramax,6spd,4x4,Not stock. Estimated 550rwhp/1100rwfp on fuel only. 03 3500 Duramax,6spd,4x4,Pac-Brake,not stock Estimated 500rwhp/1000rwfp fuel only 67 K10 in many pieces Little Brothers truck 67 K20 Cummins 12V/NV4500/205, D60/Eaton w/ Detroit,37" Xterrains,crossover steering, Future plans,Twins and lots of fuel.

08-14-2008, 01:36 PM	#7
TuffGuy Registered User Join Date: May 2008 Location: Midland, TX Posts: 8	Re: H052/H072 No-Spin Im new with cars maybe a stupid question but what is a no-spin

08-14-2008, 03:42 PM	#8
finch Registered User Join Date: Dec 2007 Location: Sioux Falls, SD Posts: 365	Re: H052/H072 No-Spin locker/limited slip/posi hope that helps __________________ Andy... '70 C/10 Under Construction http://67-72chevytrucks.com/vboard/s...d.php?t=298553 '71 K/20 Frame-off resto, SOLD!!! http://67-72chevytrucks.com/vboard/c...ct=2399&cat=12 '05 Silverado Z-71, CC SB, Daily Driver

08-14-2008, 04:00 PM	#9
gn4u2c2 Account Suspended Join Date: Jul 2006 Location: d.c Posts: 315	Re: H052/H072 No-Spin They are nice to have but you can get them around here for $50.00

08-14-2008, 06:43 PM	#10
Ace in the hole Registered User Join Date: Apr 2007 Location: Kalamazoo, Michigan, USA Posts: 538	Re: H052/H072 No-Spin I would not mind having one but your a little to far away. What gears do they have? __________________ 1970 K20, 350--- SOLD 05 silverado extended cab short box- duramax Jeep wrangler unlimited

08-15-2008, 09:25 AM	#11
wrangler94 Registered User Join Date: Jul 2008 Location: Washington, NC Posts: 93	Re: H052/H072 No-Spin PM sent

08-21-2008, 09:47 PM	#12
wrangler94 Registered User Join Date: Jul 2008 Location: Washington, NC Posts: 93	Re: H052/H072 No-Spin I'm definitely interested in it if you still want to sell it. I sent a PM the other day.

10-02-2008, 10:18 AM	#13
1967k30 Senior Member Join Date: Sep 2005 Location: NE Posts: 363	Re: H052/H072 No-Spin I replyed to my PM's. It'll fit in a flat rate box and ship for around $10. __________________ 01 2500 Duramax,6spd,4x4,Not stock. Estimated 550rwhp/1100rwfp on fuel only. 03 3500 Duramax,6spd,4x4,Pac-Brake,not stock Estimated 500rwhp/1000rwfp fuel only 67 K10 in many pieces Little Brothers truck 67 K20 Cummins 12V/NV4500/205, D60/Eaton w/ Detroit,37" Xterrains,crossover steering, Future plans,Twins and lots of fuel.

10-07-2008, 09:22 AM	#14
1967k30 Senior Member Join Date: Sep 2005 Location: NE Posts: 363	Re: H052/H072 No-Spin Bump __________________ 01 2500 Duramax,6spd,4x4,Not stock. Estimated 550rwhp/1100rwfp on fuel only. 03 3500 Duramax,6spd,4x4,Pac-Brake,not stock Estimated 500rwhp/1000rwfp fuel only 67 K10 in many pieces Little Brothers truck 67 K20 Cummins 12V/NV4500/205, D60/Eaton w/ Detroit,37" Xterrains,crossover steering, Future plans,Twins and lots of fuel.

12-26-2008, 08:02 PM	#15
1967k30 Senior Member Join Date: Sep 2005 Location: NE Posts: 363	Re: H052/H072 No-Spin $300 + Flat rate box. __________________ 01 2500 Duramax,6spd,4x4,Not stock. Estimated 550rwhp/1100rwfp on fuel only. 03 3500 Duramax,6spd,4x4,Pac-Brake,not stock Estimated 500rwhp/1000rwfp fuel only 67 K10 in many pieces Little Brothers truck 67 K20 Cummins 12V/NV4500/205, D60/Eaton w/ Detroit,37" Xterrains,crossover steering, Future plans,Twins and lots of fuel.

12-26-2008, 10:44 PM	#16
PICKMUP "Trucks with Class" Join Date: Jul 2000 Location: OLYMPIA, WA, USA Posts: 8,158	Re: H052/H072 No-Spin I assume this is the complete drop out center section? New or used? Is this a clutch/posi unit or is it a ratchet type locker (Detroit Locker)? Pictures are probably going to be needed to show exactly what you have & appearance/condition.



Register or Log In To remove these advertisements.

12-27-2008, 12:21 AM	#18
STOCKISH Formerly- 1972SuperCheyenne Join Date: Oct 2008 Location: Wake Forest NC Posts: 5,782	Re: H052/H072 No-Spin If it helps with your sale, this will also fit a GM 14 bolt rear if you use the side spider gears from the 14 bolt. And these are bulletproof. GL with the sale. __________________ --Josh My Build Thread:http://67-72chevytrucks.com/vboard/s...d.php?t=799218 A good crossthread is better than Loctite any day. Life is not about what you have, but who you have to share it with.

12-27-2008, 03:35 AM	#19
BBGMC Registered User Join Date: Oct 2007 Location: Portland, OR Posts: 49	Re: H052/H072 No-Spin would that fit a dana 60

12-27-2008, 10:49 AM	#20
STOCKISH Formerly- 1972SuperCheyenne Join Date: Oct 2008 Location: Wake Forest NC Posts: 5,782	Re: H052/H072 No-Spin No it wont. HO52/72 and 14 bolt only. __________________ --Josh My Build Thread:http://67-72chevytrucks.com/vboard/s...d.php?t=799218 A good crossthread is better than Loctite any day. Life is not about what you have, but who you have to share it with.

12-31-2008, 11:02 AM	#22
1967k30 Senior Member Join Date: Sep 2005 Location: NE Posts: 363	Re: H052/H072 No-Spin Bump. __________________ 01 2500 Duramax,6spd,4x4,Not stock. Estimated 550rwhp/1100rwfp on fuel only. 03 3500 Duramax,6spd,4x4,Pac-Brake,not stock Estimated 500rwhp/1000rwfp fuel only 67 K10 in many pieces Little Brothers truck 67 K20 Cummins 12V/NV4500/205, D60/Eaton w/ Detroit,37" Xterrains,crossover steering, Future plans,Twins and lots of fuel.

12-31-2008, 01:29 PM	#23
4x4longbed Registered User Join Date: Dec 2008 Location: kernersville north carolina Posts: 17	Re: H052/H072 No-Spin Is this still for sale? What's your bottom dollar?

01-01-2009, 02:51 PM	#25
4x4longbed Registered User Join Date: Dec 2008 Location: kernersville north carolina Posts: 17	Re: H052/H072 No-Spin I will give $250 and pay the freight. BTW is the the unit only or the whole center chunk ? I noticed in the previous threads you mentioned pictures, but i did not see any posted. Sorry if i missed them, I'm new to this site. Thanks, Jim

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.