Headers for 327 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

blukangoo · 07-19-2008, 08:16 AM

Hi,

Can any body tell me by looking at these headers if they will fit my 68 with a 327?

Here is the Ebay Link: Click Me!

blukangoo · 07-20-2008, 05:42 PM

Auction has ended.
They went for cheaper than I was going to spend.
I didn´t get an answer so I didn´t get them.
Oh well!

heavy71chevy · 07-20-2008, 05:57 PM

Well They look just like mine only without the flanges on the back...My only beef with mine was that with my header mufflers bolted on the kick the pipes real close to the ground...but I fixed it with some steel strapping

Indyuke · 07-20-2008, 06:02 PM

The ebay ad said they were for the SBC 350, and from what I understand the 327 and 350 engine block are the same.

07-19-2008, 08:16 AM	#1
blukangoo Neighborhood Pickle Slinger Join Date: Jan 2007 Location: Cadolzburg, Bavaria, Germany Posts: 2,224	Headers for 327 Hi, Can any body tell me by looking at these headers if they will fit my 68 with a 327? Here is the Ebay Link: Click Me! __________________ -------------------------------------------------- My C10 Diary Our cars: 1966 Chevrolet Chevelle 396 - TH350 1968 Chevrolet C10/CST 327 TH400/375 1969 Corvette Stingray 350 - Muncie Manual Trans 1969 Chevrolet ElCamino 350 - TH400 1970 Cutlass Supreme Convertible - 350 Rocket - TH350 1973 Camaro LT - New Engine Done - TH350 1973 Corvette Convertible 454 - TH400

07-20-2008, 05:42 PM	#2
blukangoo Neighborhood Pickle Slinger Join Date: Jan 2007 Location: Cadolzburg, Bavaria, Germany Posts: 2,224	Re: Headers for 327 Auction has ended. They went for cheaper than I was going to spend. I didn´t get an answer so I didn´t get them. Oh well! __________________ -------------------------------------------------- My C10 Diary Our cars: 1966 Chevrolet Chevelle 396 - TH350 1968 Chevrolet C10/CST 327 TH400/375 1969 Corvette Stingray 350 - Muncie Manual Trans 1969 Chevrolet ElCamino 350 - TH400 1970 Cutlass Supreme Convertible - 350 Rocket - TH350 1973 Camaro LT - New Engine Done - TH350 1973 Corvette Convertible 454 - TH400

07-20-2008, 05:57 PM	#3
heavy71chevy Registered User Join Date: Apr 2007 Location: antreville, south carolina Posts: 873	Re: Headers for 327 Well They look just like mine only without the flanges on the back...My only beef with mine was that with my header mufflers bolted on the kick the pipes real close to the ground...but I fixed it with some steel strapping __________________ "Dixie Destroyer" 71 C10 LWB Fleet Future Blown Prostreet Monster

07-20-2008, 06:02 PM	#4
Indyuke Registered User Join Date: Feb 2008 Location: Lake Stevens, WA Posts: 623	Re: Headers for 327 The ebay ad said they were for the SBC 350, and from what I understand the 327 and 350 engine block are the same.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.