Help!!!! emergency brake cable - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Alexis · 11-12-2002, 07:04 PM

well i got most of the cable out except for the on connect to the frame by the steel rod, are you suppose to cut the cable that attach to it to be able to slide the rod out, i see no other way and just want to get a second "go ahead" before i did some damage

JimKshortstep4x4 · 11-13-2002, 10:06 AM

You should not need to cut the cable, the ferrule on the cable should slide through the retainer and then the retainer will slip off of the rod.

Jim

11-12-2002, 07:04 PM	#1
Alexis Member since 2000 Join Date: Dec 2000 Location: Mountain View Ca / Mexico Posts: 7,874	Help!!!! emergency brake cable well i got most of the cable out except for the on connect to the frame by the steel rod, are you suppose to cut the cable that attach to it to be able to slide the rod out, i see no other way and just want to get a second "go ahead" before i did some damage

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

11-13-2002, 10:06 AM	#2
JimKshortstep4x4 Senior Member Join Date: Jul 2001 Location: Muskegon,MI,USA Posts: 6,026	You should not need to cut the cable, the ferrule on the cable should slide through the retainer and then the retainer will slip off of the rod. Jim



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.