WTB, double groove water pump pulley, I-6 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

NitroMike · 08-03-2008, 11:22 AM

Putting p/s on an I-6 250 in my '67. Need a double groove water pump pulley for a 6 cylinder. Anybody got one?
Thanks,

Mike D.

*sharpie1972* · 08-03-2008, 03:59 PM

Hi Mike, $40 shipped. Thanks, Dennis. Paypal denscustom1@hotmail.com

**PICKMUP** · 08-03-2008, 05:21 PM

FYI: The 3-groove balancer is 292. I don't know if that will work on the 250 OK or not.

NitroMike · 08-03-2008, 07:53 PM

Dennis,

This looks right even though you are showing it on a 292. Would you mind measuring the dimension of the pulley front to back?

I'm not concerned with the 3 groove pulley on the crank. Have a 2 groover that should work just fine.

Thanks,

Mike D.

nplocoman · 08-03-2008, 07:59 PM

how much for the balancer?

*sharpie1972* · 08-03-2008, 10:19 PM

1 1/2" deep on grooves, 3" deep from front to back.

NitroMike · 08-03-2008, 11:46 PM

That's the one I need!

Paypal sent. Thanks.

Mike D.

08-03-2008, 11:22 AM	#1
NitroMike Active Member Join Date: Dec 2005 Location: Bethlehem, PA Posts: 346	WTB, double groove water pump pulley, I-6 Putting p/s on an I-6 250 in my '67. Need a double groove water pump pulley for a 6 cylinder. Anybody got one? Thanks, Mike D. __________________ The older I get, the faster I was!!

08-03-2008, 03:59 PM	#2
sharpie1972 Account Suspended Join Date: Apr 2007 Location: Powell, Wyoming Posts: 4,973	Re: WTB, double groove water pump pulley, I-6 Hi Mike, $40 shipped. Thanks, Dennis. Paypal denscustom1@hotmail.com Attached Images Last edited by sharpie1972; 08-03-2008 at 04:06 PM. Reason: spelling

08-03-2008, 05:21 PM	#3
PICKMUP "Trucks with Class" Join Date: Jul 2000 Location: OLYMPIA, WA, USA Posts: 8,125	Re: WTB, double groove water pump pulley, I-6 FYI: The 3-groove balancer is 292. I don't know if that will work on the 250 OK or not.

08-03-2008, 07:53 PM	#4
NitroMike Active Member Join Date: Dec 2005 Location: Bethlehem, PA Posts: 346	Re: WTB, double groove water pump pulley, I-6 Dennis, This looks right even though you are showing it on a 292. Would you mind measuring the dimension of the pulley front to back? I'm not concerned with the 3 groove pulley on the crank. Have a 2 groover that should work just fine. Thanks, Mike D. __________________ The older I get, the faster I was!!

08-03-2008, 07:59 PM	#5
nplocoman never finish start another Join Date: Mar 2007 Location: North Platte Nebraska Posts: 432	Re: WTB, double groove water pump pulley, I-6 how much for the balancer?

08-03-2008, 10:19 PM	#6
sharpie1972 Account Suspended Join Date: Apr 2007 Location: Powell, Wyoming Posts: 4,973	Re: WTB, double groove water pump pulley, I-6 1 1/2" deep on grooves, 3" deep from front to back.

08-03-2008, 11:46 PM	#7
NitroMike Active Member Join Date: Dec 2005 Location: Bethlehem, PA Posts: 346	Re: WTB, double groove water pump pulley, I-6 That's the one I need! Paypal sent. Thanks. Mike D. __________________ The older I get, the faster I was!!

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.