FS - NOS lower tailgate molding - Central PA - The 1947 - Present Chevrolet & GMC Truck Message Board Network

msgross · 08-10-2008, 03:48 PM

SOLD

msgross · 08-22-2008, 07:50 PM

ttt

msgross · 08-31-2008, 12:49 PM

ttt for the weekend crowd

**70cst** · 08-31-2008, 03:54 PM

I'm interested if this is correct for a Chevy 70cst gate. Let me know.
Thanks

msgross · 08-31-2008, 04:12 PM

I can snap a pic of it but it's the same as the top...just one complete piece. I have it wrapped to protect it from scratches. SOme of the original package is still around it but it was opened....

looks nice...

**70cst** · 08-31-2008, 04:26 PM

Ok...need some help? Would this trim piece be used a a tailgate of a 70cst? I know the gate has a wide Chevrolet band but not sure if it has a lower band also.
Thanks

msgross · 08-31-2008, 05:29 PM

If you don't have the large black or woodgrain emblem that says "CHEVROLET" then I think so. I don't think that 67-68's have these lower pieces but someone else might know that exact details of your year.

**70cst** · 08-31-2008, 06:29 PM

Ok thanks-I'll pass as my truck does have the wide Chevrolet band.

msgross · 08-31-2008, 07:45 PM

ok, i don't know the differences in the cst tailgates... i'll look for some pics to confirm.

msgross · 08-31-2008, 08:59 PM

Here is a post where they talk about it... looks like the lower molding doesn't go with the tailgate band, but the first pic has one with it.... I guess it's one or the other with the upper trim and taillight trim.

http://67-72chevytrucks.com/vboard/s...=tailgate+trim

ttt.

**bigdon-70blazer** · 09-01-2008, 01:07 AM

I may be interested pending a pic and check of my stuff in the am....bigdon

msgross · 09-01-2008, 09:05 AM

pics added, there is some residue on it from the GM packaging. It comes right off with a little never-dull. Will ship in heavy tube to prevent bending.

msgross · 09-04-2008, 07:40 AM

ttt...OBO as well

msgross · 09-05-2008, 08:22 PM

ttt...AGAIN..nobody needs this?

newbraunie · 09-06-2008, 08:18 AM

I am interested. Any ideas on where to buy the clips? How many clips are needed? $50 shipped?

msgross · 09-06-2008, 08:42 AM

send me your zip for a shipping quote then i'll see about the price. These are $25 reproduced so NOS is usually worth double in my book.

My tailgate has 8 holes for the clips. Any vendor should have them for 50 cents each. You need the "push-in" type.

msgross · 09-06-2008, 12:50 PM

SOLD AND SHIPPED>.. thanks chris.

newbraunie · 09-15-2008, 10:40 PM

Quote:

Originally Posted by msgross

SOLD AND SHIPPED>.. thanks chris.

Trim arrived last week in good shape. Thanks for packing properly. Chris

msgross · 09-16-2008, 08:05 AM

glad to hear it...thanks, send pics...

08-10-2008, 03:48 PM	#1
msgross Registered User Join Date: Jul 2006 Location: Central PA Posts: 12,201	FS - NOS lower tailgate molding - Central PA SOLD __________________ The Garage: 1968 K-10 SWB - "Project Money Pit" 1996 Z-71 - "huntin rig" 1969 C-10 LWB (SOLD) "Project flip that truck or else" 1993 Passport, F@rd 1-ton (SOLD)"Project Cousin Eddie" My Garage Build "The 1,000 footer" Last edited by msgross; 09-06-2008 at 12:50 PM.

08-22-2008, 07:50 PM	#2
msgross Registered User Join Date: Jul 2006 Location: Central PA Posts: 12,201	Re: FS - NOS lower tailgate molding - Central PA ttt __________________ The Garage: 1968 K-10 SWB - "Project Money Pit" 1996 Z-71 - "huntin rig" 1969 C-10 LWB (SOLD) "Project flip that truck or else" 1993 Passport, F@rd 1-ton (SOLD)"Project Cousin Eddie" My Garage Build "The 1,000 footer"

08-31-2008, 12:49 PM	#3
msgross Registered User Join Date: Jul 2006 Location: Central PA Posts: 12,201	Re: FS - NOS lower tailgate molding - Central PA ttt for the weekend crowd __________________ The Garage: 1968 K-10 SWB - "Project Money Pit" 1996 Z-71 - "huntin rig" 1969 C-10 LWB (SOLD) "Project flip that truck or else" 1993 Passport, F@rd 1-ton (SOLD)"Project Cousin Eddie" My Garage Build "The 1,000 footer"

08-31-2008, 03:54 PM	#4
70cst Senior Member Join Date: Feb 2001 Location: New Madison, Ohio Posts: 21,365	Re: FS - NOS lower tailgate molding - Central PA I'm interested if this is correct for a Chevy 70cst gate. Let me know. Thanks __________________ A husband can be right...or...A husband can be happy. 67-72 Chevy and GMC Trucks...The Classic Truck for the Classic Folk. 1970 CST Two tone green, 402BB, 400 Automatic, Tach, Buckets, AC, AM-FM, Tilt, GM CB, GM 8 Tract, LWB, etc JOHN 17:3...The better side of "LIFE" Remember: Everyday is a good day...Some are just gooder!

08-31-2008, 04:12 PM	#5
msgross Registered User Join Date: Jul 2006 Location: Central PA Posts: 12,201	Re: FS - NOS lower tailgate molding - Central PA I can snap a pic of it but it's the same as the top...just one complete piece. I have it wrapped to protect it from scratches. SOme of the original package is still around it but it was opened.... looks nice... __________________ The Garage: 1968 K-10 SWB - "Project Money Pit" 1996 Z-71 - "huntin rig" 1969 C-10 LWB (SOLD) "Project flip that truck or else" 1993 Passport, F@rd 1-ton (SOLD)"Project Cousin Eddie" My Garage Build "The 1,000 footer"

08-31-2008, 04:26 PM	#6
70cst Senior Member Join Date: Feb 2001 Location: New Madison, Ohio Posts: 21,365	Re: FS - NOS lower tailgate molding - Central PA Ok...need some help? Would this trim piece be used a a tailgate of a 70cst? I know the gate has a wide Chevrolet band but not sure if it has a lower band also. Thanks __________________ A husband can be right...or...A husband can be happy. 67-72 Chevy and GMC Trucks...The Classic Truck for the Classic Folk. 1970 CST Two tone green, 402BB, 400 Automatic, Tach, Buckets, AC, AM-FM, Tilt, GM CB, GM 8 Tract, LWB, etc JOHN 17:3...The better side of "LIFE" Remember: Everyday is a good day...Some are just gooder!

08-31-2008, 05:29 PM	#7
msgross Registered User Join Date: Jul 2006 Location: Central PA Posts: 12,201	Re: FS - NOS lower tailgate molding - Central PA If you don't have the large black or woodgrain emblem that says "CHEVROLET" then I think so. I don't think that 67-68's have these lower pieces but someone else might know that exact details of your year. __________________ The Garage: 1968 K-10 SWB - "Project Money Pit" 1996 Z-71 - "huntin rig" 1969 C-10 LWB (SOLD) "Project flip that truck or else" 1993 Passport, F@rd 1-ton (SOLD)"Project Cousin Eddie" My Garage Build "The 1,000 footer" Last edited by msgross; 08-31-2008 at 05:34 PM.

08-31-2008, 06:29 PM	#8
70cst Senior Member Join Date: Feb 2001 Location: New Madison, Ohio Posts: 21,365	Re: FS - NOS lower tailgate molding - Central PA Ok thanks-I'll pass as my truck does have the wide Chevrolet band. __________________ A husband can be right...or...A husband can be happy. 67-72 Chevy and GMC Trucks...The Classic Truck for the Classic Folk. 1970 CST Two tone green, 402BB, 400 Automatic, Tach, Buckets, AC, AM-FM, Tilt, GM CB, GM 8 Tract, LWB, etc JOHN 17:3...The better side of "LIFE" Remember: Everyday is a good day...Some are just gooder!

08-31-2008, 07:45 PM	#9
msgross Registered User Join Date: Jul 2006 Location: Central PA Posts: 12,201	Re: FS - NOS lower tailgate molding - Central PA ok, i don't know the differences in the cst tailgates... i'll look for some pics to confirm. __________________ The Garage: 1968 K-10 SWB - "Project Money Pit" 1996 Z-71 - "huntin rig" 1969 C-10 LWB (SOLD) "Project flip that truck or else" 1993 Passport, F@rd 1-ton (SOLD)"Project Cousin Eddie" My Garage Build "The 1,000 footer" Last edited by msgross; 08-31-2008 at 07:45 PM.

08-31-2008, 08:59 PM	#10
msgross Registered User Join Date: Jul 2006 Location: Central PA Posts: 12,201	Re: FS - NOS lower tailgate molding - Central PA Here is a post where they talk about it... looks like the lower molding doesn't go with the tailgate band, but the first pic has one with it.... I guess it's one or the other with the upper trim and taillight trim. http://67-72chevytrucks.com/vboard/s...=tailgate+trim ttt. __________________ The Garage: 1968 K-10 SWB - "Project Money Pit" 1996 Z-71 - "huntin rig" 1969 C-10 LWB (SOLD) "Project flip that truck or else" 1993 Passport, F@rd 1-ton (SOLD)"Project Cousin Eddie" My Garage Build "The 1,000 footer"

09-01-2008, 01:07 AM	#11
bigdon-70blazer Registered User Join Date: Jan 2007 Location: Poplar Bluff, MO Posts: 1,501	Re: FS - NOS lower tailgate molding - Central PA I may be interested pending a pic and check of my stuff in the am....bigdon

09-01-2008, 09:05 AM	#12
msgross Registered User Join Date: Jul 2006 Location: Central PA Posts: 12,201	Re: FS - NOS lower tailgate molding - Central PA pics added, there is some residue on it from the GM packaging. It comes right off with a little never-dull. Will ship in heavy tube to prevent bending. __________________ The Garage: 1968 K-10 SWB - "Project Money Pit" 1996 Z-71 - "huntin rig" 1969 C-10 LWB (SOLD) "Project flip that truck or else" 1993 Passport, F@rd 1-ton (SOLD)"Project Cousin Eddie" My Garage Build "The 1,000 footer"

09-04-2008, 07:40 AM	#13
msgross Registered User Join Date: Jul 2006 Location: Central PA Posts: 12,201	Re: FS - NOS lower tailgate molding - Central PA ttt...OBO as well __________________ The Garage: 1968 K-10 SWB - "Project Money Pit" 1996 Z-71 - "huntin rig" 1969 C-10 LWB (SOLD) "Project flip that truck or else" 1993 Passport, F@rd 1-ton (SOLD)"Project Cousin Eddie" My Garage Build "The 1,000 footer"

09-05-2008, 08:22 PM	#14
msgross Registered User Join Date: Jul 2006 Location: Central PA Posts: 12,201	Re: FS - NOS lower tailgate molding - Central PA ttt...AGAIN..nobody needs this? __________________ The Garage: 1968 K-10 SWB - "Project Money Pit" 1996 Z-71 - "huntin rig" 1969 C-10 LWB (SOLD) "Project flip that truck or else" 1993 Passport, F@rd 1-ton (SOLD)"Project Cousin Eddie" My Garage Build "The 1,000 footer"

09-06-2008, 08:18 AM	#15
newbraunie Registered User Join Date: Aug 2008 Location: Central TX Posts: 393	Re: FS - NOS lower tailgate molding - Central PA I am interested. Any ideas on where to buy the clips? How many clips are needed? $50 shipped?



Register or Log In To remove these advertisements.

09-06-2008, 08:42 AM	#16
msgross Registered User Join Date: Jul 2006 Location: Central PA Posts: 12,201	Re: FS - NOS lower tailgate molding - Central PA send me your zip for a shipping quote then i'll see about the price. These are $25 reproduced so NOS is usually worth double in my book. My tailgate has 8 holes for the clips. Any vendor should have them for 50 cents each. You need the "push-in" type. __________________ The Garage: 1968 K-10 SWB - "Project Money Pit" 1996 Z-71 - "huntin rig" 1969 C-10 LWB (SOLD) "Project flip that truck or else" 1993 Passport, F@rd 1-ton (SOLD)"Project Cousin Eddie" My Garage Build "The 1,000 footer"

09-06-2008, 12:50 PM	#17
msgross Registered User Join Date: Jul 2006 Location: Central PA Posts: 12,201	Re: FS - NOS lower tailgate molding - Central PA SOLD AND SHIPPED>.. thanks chris. __________________ The Garage: 1968 K-10 SWB - "Project Money Pit" 1996 Z-71 - "huntin rig" 1969 C-10 LWB (SOLD) "Project flip that truck or else" 1993 Passport, F@rd 1-ton (SOLD)"Project Cousin Eddie" My Garage Build "The 1,000 footer"

09-16-2008, 08:05 AM	#19
msgross Registered User Join Date: Jul 2006 Location: Central PA Posts: 12,201	Re: FS - NOS lower tailgate molding - Central PA glad to hear it...thanks, send pics... __________________ The Garage: 1968 K-10 SWB - "Project Money Pit" 1996 Z-71 - "huntin rig" 1969 C-10 LWB (SOLD) "Project flip that truck or else" 1993 Passport, F@rd 1-ton (SOLD)"Project Cousin Eddie" My Garage Build "The 1,000 footer"

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.