Need pic of Lokar column linkage assmy - The 1947 - Present Chevrolet & GMC Truck Message Board Network

jayharrell · 08-13-2008, 11:11 AM

Well, gathered up a used lokar linkage, but i might be missing a spacer or shoulder slide or something. Anyone have a picture of how the bar attaches to the billet piece on the trany?? I can't seem to figure out if there should be a slider piece or if just the shoulder bolt is fine to attche the eye to the billet part that bolts to the trany.

Also i hit lokars site, can you buy just the nut to attach the billet part to the trany or do you have to get the whole end kit??

thanks to anyone that might have run into this before.

ttt.

mbgmike · 08-13-2008, 06:41 PM

We sell Lokar products and everything comes in a kit not individually. You may call them and see. I will post a pic of one installed. let my go outside.

jayharrell · 08-13-2008, 07:06 PM

Heres what i have and arranged in what i think will work with what i got.

Am I missing something?? Should there be a nylon washer on the bolt to help it move, or some sorta shoulder slide guide??

mbgmike · 08-13-2008, 07:23 PM

The slot if for adjustment not to slide back and forth. You position the lever where you want it and bolt it tight. I am not sure but it looks like everything is there. I will dig though my crap and see. On second thought it seems like there is a brass bushing that goes into the slot also and that may be missing. Be back

jayharrell · 08-13-2008, 07:25 PM

OOOHH.. i thought it slid back and forth. Well then i have everything minus the nut to put it on the trany.

Thanks.

Frizzle Fry · 08-13-2008, 07:34 PM

Looks like you got it figured out, but here you go anyway:

jayharrell · 08-13-2008, 07:37 PM

yeah. i saw that pic on their site. But it shows 2 shoulder nuts also. I guess one if for chevy and the other for ford. For some reason i thought the shaft slide up and down the billet piece.

But can you get just the nut to put it on the trany?? I would hate to have to buy the whole thing over again to get just that nut.

**Hart_Rod** · 08-13-2008, 07:58 PM

Quote:

Originally Posted by jayharrell

yeah. i saw that pic on their site. But it shows 2 shoulder nuts also. I guess one if for chevy and the other for ford. For some reason i thought the shaft slide up and down the billet piece.

But can you get just the nut to put it on the trany?? I would hate to have to buy the whole thing over again to get just that nut.

Actually ones metric and ones standard. You can call Lokar directly and ask for that piece. It won't be cheap, they don't like to sell to the public. For some reason I think I may have an extra one. I'll look.

R

Richard H. · 08-13-2008, 10:12 PM

I put the lokar on my 700r new and it did not come with the nuts as shown in the pics. After much head scratching I believe I got the right size rod coupling to fit the trans and cut it to the desired length to get to get a wrench on it.

drman929 · 08-13-2008, 10:34 PM

I just installed one of these tonight on my 4l60e. Great buy! I was able to adjust it where P,R,and N were right, but the gears are a bit off since i have 4 now...hehe

08-13-2008, 11:11 AM	#1
jayharrell Gettin By on Gettin By Join Date: Jan 2008 Location: Cedar Creek, Tx Posts: 1,033	Need pic of Lokar column linkage assmy Well, gathered up a used lokar linkage, but i might be missing a spacer or shoulder slide or something. Anyone have a picture of how the bar attaches to the billet piece on the trany?? I can't seem to figure out if there should be a slider piece or if just the shoulder bolt is fine to attche the eye to the billet part that bolts to the trany. Also i hit lokars site, can you buy just the nut to attach the billet part to the trany or do you have to get the whole end kit?? thanks to anyone that might have run into this before. ttt. __________________ 69 CST10 LWB 455 Buick 00 S10 2.2 Vin5 76 GL1000 Naked 1bl VW carb "Adios to all the concrete; Gonna get me some dirt road back streets" Last edited by jayharrell; 08-13-2008 at 11:12 AM.

08-13-2008, 06:41 PM	#2
mbgmike Registered User Join Date: Aug 2005 Location: Pasadena,Tx /Pto Pta DR Posts: 5,415	Re: Need pic of Lokar column linkage assmy We sell Lokar products and everything comes in a kit not individually. You may call them and see. I will post a pic of one installed. let my go outside. Attached Images Last edited by mbgmike; 08-13-2008 at 06:52 PM. Reason: added photo

08-13-2008, 07:06 PM	#3
jayharrell Gettin By on Gettin By Join Date: Jan 2008 Location: Cedar Creek, Tx Posts: 1,033	Re: Need pic of Lokar column linkage assmy Heres what i have and arranged in what i think will work with what i got. Am I missing something?? Should there be a nylon washer on the bolt to help it move, or some sorta shoulder slide guide?? __________________ 69 CST10 LWB 455 Buick 00 S10 2.2 Vin5 76 GL1000 Naked 1bl VW carb "Adios to all the concrete; Gonna get me some dirt road back streets" Last edited by jayharrell; 08-13-2008 at 07:23 PM.

08-13-2008, 07:23 PM	#4
mbgmike Registered User Join Date: Aug 2005 Location: Pasadena,Tx /Pto Pta DR Posts: 5,415	Re: Need pic of Lokar column linkage assmy The slot if for adjustment not to slide back and forth. You position the lever where you want it and bolt it tight. I am not sure but it looks like everything is there. I will dig though my crap and see. On second thought it seems like there is a brass bushing that goes into the slot also and that may be missing. Be back Last edited by mbgmike; 08-13-2008 at 07:27 PM. Reason: added

08-13-2008, 07:25 PM	#5
jayharrell Gettin By on Gettin By Join Date: Jan 2008 Location: Cedar Creek, Tx Posts: 1,033	Re: Need pic of Lokar column linkage assmy OOOHH.. i thought it slid back and forth. Well then i have everything minus the nut to put it on the trany. Thanks. __________________ 69 CST10 LWB 455 Buick 00 S10 2.2 Vin5 76 GL1000 Naked 1bl VW carb "Adios to all the concrete; Gonna get me some dirt road back streets" Last edited by jayharrell; 08-13-2008 at 07:25 PM.

08-13-2008, 07:34 PM	#6
Frizzle Fry Registered User Join Date: Aug 2005 Location: Hillsboro Oregon Posts: 6,449	Re: Need pic of Lokar column linkage assmy Looks like you got it figured out, but here you go anyway:

08-13-2008, 07:37 PM	#7
jayharrell Gettin By on Gettin By Join Date: Jan 2008 Location: Cedar Creek, Tx Posts: 1,033	Re: Need pic of Lokar column linkage assmy yeah. i saw that pic on their site. But it shows 2 shoulder nuts also. I guess one if for chevy and the other for ford. For some reason i thought the shaft slide up and down the billet piece. But can you get just the nut to put it on the trany?? I would hate to have to buy the whole thing over again to get just that nut. Attached Images __________________ 69 CST10 LWB 455 Buick 00 S10 2.2 Vin5 76 GL1000 Naked 1bl VW carb "Adios to all the concrete; Gonna get me some dirt road back streets"

08-13-2008, 10:12 PM	#9
Richard H. Spanked once Join Date: Oct 2006 Location: Intheshop, Indiana Posts: 969	Re: Need pic of Lokar column linkage assmy I put the lokar on my 700r new and it did not come with the nuts as shown in the pics. After much head scratching I believe I got the right size rod coupling to fit the trans and cut it to the desired length to get to get a wrench on it.

08-13-2008, 10:34 PM	#10
drman929 Registered User Join Date: Nov 2006 Location: Arkansas Posts: 232	Re: Need pic of Lokar column linkage assmy I just installed one of these tonight on my 4l60e. Great buy! I was able to adjust it where P,R,and N were right, but the gears are a bit off since i have 4 now...hehe

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.