Will 20x9's Work Up Front? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Ford Assassin · 08-22-2008, 10:35 AM

Hey guys, I've been doing some rim shopping and I found a few that I like, but they are 20x9's. I was planning on just running them on all 4 corners, but wondered if I could get away with them in the first place on the front of my '69 C10. I can get them in any backspacing I want, so that's not an issue and I was thinking about 255/45/20 for tires up front (295/45/20's in back).

Thanks!!

Ford Assassin · 01-06-2009, 04:15 PM

Anyone?

VA72C10 · 01-06-2009, 05:36 PM

I know people run 8.5" with no problem w/ 4.5" BS. Honestly not sure but here's a free bump for you.

matthufham · 01-07-2009, 03:25 AM

shouldn't have a problem with the right backspace, however i dont have those specs. they should tuck if its lowered, and i'm sure that's why you're questioning.

Ray Rust · 01-07-2009, 04:08 AM

can't see why not , I'm running 22x9's with 305x40's on all corners

Frizzle Fry · 01-07-2009, 05:23 AM

Quote:

Originally Posted by VA72C10

I know people run 8.5" with no problem w/ 4.5" BS. Honestly not sure but here's a free bump for you.

My 20x8.5's have 5.25" BS. So a 20x9 would need around 5.5" BS. Maybe not quite as much if you have drums.

Ford Assassin · 01-07-2009, 12:42 PM

Quote:

Originally Posted by Ray Rust

can't see why not , I'm running 22x9's with 305x40's on all corners

Pics?

08-22-2008, 10:35 AM	#1
Ford Assassin Registered User Join Date: Jun 2008 Location: Jackson, Ca. Posts: 674	Will 20x9's Work Up Front? Hey guys, I've been doing some rim shopping and I found a few that I like, but they are 20x9's. I was planning on just running them on all 4 corners, but wondered if I could get away with them in the first place on the front of my '69 C10. I can get them in any backspacing I want, so that's not an issue and I was thinking about 255/45/20 for tires up front (295/45/20's in back). Thanks!! __________________ Cable -K5 Blazer 2wd: 6.0 LQ4, 7875 Turbo, Tick Stage II Turbo Cam, Built 4L80e, RevMax Billet 3600, 9.5" 14 Bolt -Chevy 3+3 Crew Cab Dually: Cummins 12v P-Pump Swap, Compound Turbos, A2W Intercooler, NV4500HD, 4wd conversion, Radius Arms, Coilovers, Crossover Steering, etc Build Thread: http://67-72chevytrucks.com/vboard/s...d.php?t=803608

01-06-2009, 04:15 PM	#2
Ford Assassin Registered User Join Date: Jun 2008 Location: Jackson, Ca. Posts: 674	Re: Will 20x9's Work Up Front? Anyone? __________________ Cable -K5 Blazer 2wd: 6.0 LQ4, 7875 Turbo, Tick Stage II Turbo Cam, Built 4L80e, RevMax Billet 3600, 9.5" 14 Bolt -Chevy 3+3 Crew Cab Dually: Cummins 12v P-Pump Swap, Compound Turbos, A2W Intercooler, NV4500HD, 4wd conversion, Radius Arms, Coilovers, Crossover Steering, etc Build Thread: http://67-72chevytrucks.com/vboard/s...d.php?t=803608

01-06-2009, 05:36 PM	#3
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,269	Re: Will 20x9's Work Up Front? I know people run 8.5" with no problem w/ 4.5" BS. Honestly not sure but here's a free bump for you. __________________ Looking for a 67-72 swb or blazer project in or around VA.

01-07-2009, 03:25 AM	#4
matthufham Registered User Join Date: Feb 2005 Location: Carl Junction, Missouri Posts: 2,061	Re: Will 20x9's Work Up Front? shouldn't have a problem with the right backspace, however i dont have those specs. they should tuck if its lowered, and i'm sure that's why you're questioning.

01-07-2009, 04:08 AM	#5
Ray Rust Registered User Join Date: Dec 2008 Location: melbourne. AUSTRALIA Posts: 110	Re: Will 20x9's Work Up Front? can't see why not , I'm running 22x9's with 305x40's on all corners

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.