Charlotte Auto Fair Parts - The 1947 - Present Chevrolet & GMC Truck Message Board Network

gcburdic · 08-29-2008, 08:16 AM

Hey Guys,

I wanted to start a thread for those of us coming to the Auto Fair that have parts they want to sell, trade, or looking for something...hopefully it'll save on shipping...(Please ONLY post if you are a subscribing member)...I'll start...
1. 68 grill (turn signal and latch missing, has dent in bottom) $50
2. 68 rad support (battery area rusted out) $50
3. 72 grill (good driver w/ small ding) $100
4. 68 driver inner (okay driver needs work) $25
5. 68 passenger inner (fair driver, needs work) $20
or $40 takes both inners!!!

I am looking for 2 really good 6 lug 15x8 corvette ralleys and 2 really good 15x10 corvette ralleys for my truck if anyone has any (trim rings and centers too)!!!

tommypic · 08-30-2008, 06:40 AM

I cant tell how bad the pass side is , if its fixable I want them both

gregbr · 08-31-2008, 05:44 AM

I'll be there, in the green field EG-277 near the tunnel. Not sure what all I'm bringing yet. Will at least have a pair of short fleet bedsides (some rust on angled part inside bed, attaches to floor) $300 for both, black headliner (good condition) $50, and probably a 70 GMC grille $75. Greg

gcburdic · 09-02-2008, 07:57 AM

Hey tommypic.....PM sent

gcburdic · 09-03-2008, 08:41 AM

Here's a couple more things I can bring if anyone is still coming....don't let a little hurricane scare you!!!

1. PS Pump and bracket $40
2. assorted emblems $5 each
3. fan motor $15
4. air cleaner $30
5. upper and lower control arm bars $25

gcburdic · 09-03-2008, 03:58 PM

And some more parts....is there anyone going to the Charlotte Auto Fair this weekend that would like me to bring any of this stuff???.....Does anyone else have anything they want to bring to sell....then POST IT HERE!!!!

I hope I'm not the only one there....the hurricane won't hurt you!!!

1. 72 gas pedal assembly $15
2. dash pad (been recovered by PO, but needs re-doing) $30
3. radio patch area $20

tommypic · 09-03-2008, 11:11 PM

I got a few parts I will be there on Friday not bringing if not SOLD
1- Both Doors with Glass minimal surface rust small hole in bottom L/S $ 250
2- New Tri-Auto Vent Glass Tinted L/R $ 30
3- 2- 3 on Tree Columns $ 25
4- under dash a/c $ 25
5- manual steering box $ 15
6- 3 GM radios don't know a thing about them make me a offer
7- 5 Chevy Center Caps need cleaning up been on shelf 1 Bent $ 60 obo
8- 4 beauty rings 2 different pairs $ 30
9 - 72 Clear Big Back Glass Stain in center Put Chevy Sticker over it $ 10
10- some Custom C/10 Chrome let me know what you want I will check condition and get pic and price
11- New 67-68 Camaro Part # 3927425 Left front inner skirt GM $ 100

link to pics
http://s70.photobucket.com/albums/i1...%20For%20Sale/

71chevytruckguy · 09-04-2008, 12:55 AM

i need a set of 4 core raditators mounts, holley blue pump and regulator, and a set of accel 8.8mm plug wires. ill either be there on friday or sunday, aint sure yet. thanks. chris.

71chevytruckguy · 09-04-2008, 12:59 AM

gcburdic, what space you gonna be in, might take those inner fenders off ya. thanks. chris.

gcburdic · 09-04-2008, 08:11 AM

Quote:

Originally Posted by tommypic

7- 5 Chevy Center Caps need cleaning up been on shelf 1 Bent $ 60 obo
[/URL]

Hey Tommypics, I 'd be interested in those centers.....are they metal??

Quote:

Originally Posted by 71chevytruckguy

i need a set of 4 core raditators mounts, holley blue pump and regulator, and a set of accel 8.8mm plug wires. ill either be there on friday or sunday, aint sure yet. thanks. chris.

Hey 71chevytruckguy......you have to be a subscriber to post "want to buy" stuff....believe me it'll be the best $25 ever spent....

Quote:

Originally Posted by 71chevytruckguy

gcburdic, what space you gonna be in, might take those inner fenders off ya. thanks. chris.

Hey 71chevytruckguy, Tommypics has first dibs on those inners, but if he passes you're up next.....by the way, I don't have a space there, but would bring anything to anybody wanting to buy any of my stuff listed above.....
Thanks for looking

gcburdic · 09-09-2008, 10:06 AM

Quote:

Originally Posted by 71chevytruckguy

gcburdic, what space you gonna be in, might take those inner fenders off ya. thanks. chris.

Hey Chris,

Tommypic passed on the inners....PM sent....They are located right down the road from you in Winston-Salem....I'll be there this weekend if you are interested in taking them!!! Thanks

SANTO.DE.ORO · 10-07-2008, 04:09 PM

gc already have the 72 grill?

gcburdic · 10-08-2008, 07:39 AM

Quote:

Originally Posted by SANTO.DE.ORO

gc already have the 72 grill?

Santo,

I still have it, but I really do not want to ship.....sorry!

SANTO.DE.ORO · 10-08-2008, 10:01 AM

can ship to texas? plz...

gcburdic · 10-09-2008, 07:55 AM

Santo,

I am not going to ship....heard way too many bad stories about these things getting beat up during shipping even if they are packaged well!...If I did package it'll cost just as much to ship as the price of the part...not a good deal for you! Sorry...

SANTO.DE.ORO · 10-09-2008, 09:57 AM

ok thanks

08-29-2008, 08:16 AM	#1
gcburdic Restoration Virgin! Join Date: Jan 2008 Location: Huntersville, NC Posts: 8,298	Charlotte Auto Fair Parts Hey Guys, I wanted to start a thread for those of us coming to the Auto Fair that have parts they want to sell, trade, or looking for something...hopefully it'll save on shipping...(Please ONLY post if you are a subscribing member)...I'll start... 1. 68 grill (turn signal and latch missing, has dent in bottom) $50 2. 68 rad support (battery area rusted out) $50 3. 72 grill (good driver w/ small ding) $100 4. 68 driver inner (okay driver needs work) $25 5. 68 passenger inner (fair driver, needs work) $20 or $40 takes both inners!!! I am looking for 2 really good 6 lug 15x8 corvette ralleys and 2 really good 15x10 corvette ralleys for my truck if anyone has any (trim rings and centers too)!!! Attached Images __________________ Geoff with a G 1968 Chevy C10 SWB The Mistress 1972 Custom Deluxe C20 Suburban A Suburban Named Isabella 1966 Ford Mustang Mama's High School Graduation Present

08-30-2008, 06:40 AM	#2
tommypic Registered User Join Date: Jan 2008 Location: Piedmont , SC Posts: 728	Re: Charlotte Auto Fair Parts I cant tell how bad the pass side is , if its fixable I want them both __________________ My ZipCode = 29673 2008 Silverado Z71 LTZ Wrecked New Ride SOLD 71-72 Custom A/C Parts Truck < selling parts 67 Chevy ShortStep SOLD 67 GMC SWB Step <-- For Sell 67 Chevy SWB Step <-- working on 2000 Road King <-- SOLD 97 F150 my ride for now 2006 Escape wifes ride HELP SUPPORT THE BOARD http://67-72chevytrucks.com/vboard/payments.php Great How To Thread http://67-72chevytrucks.com/vboard/s...d.php?t=157669 Vendor Sites http://67-72chevytrucks.com/links/browselinks.php?c=2

08-31-2008, 05:44 AM	#3
gregbr Senoir Member Join Date: Mar 2002 Location: Rock Hill, SC USA Posts: 1,214	Re: Charlotte Auto Fair Parts I'll be there, in the green field EG-277 near the tunnel. Not sure what all I'm bringing yet. Will at least have a pair of short fleet bedsides (some rust on angled part inside bed, attaches to floor) $300 for both, black headliner (good condition) $50, and probably a 70 GMC grille $75. Greg __________________ 67 Chevy, Small back glass, Factory 4WD, Factory Shortbed, Factory V8, Lifted 4" 70 GMC Sierra Grande, Factory Shortbed, Factory 402/400 turbo, Super Custom Interior. Numbers matching with SPID & Build Sheet. 68K Original Miles. Restored 2010 70 GMC Restoration Pictures http://67-72chevytrucks.com/gallery/...00&ppuser=4424 Last edited by gregbr; 09-02-2008 at 12:23 PM.

09-02-2008, 07:57 AM	#4
gcburdic Restoration Virgin! Join Date: Jan 2008 Location: Huntersville, NC Posts: 8,298	Re: Charlotte Auto Fair Parts Hey tommypic.....PM sent __________________ Geoff with a G 1968 Chevy C10 SWB The Mistress 1972 Custom Deluxe C20 Suburban A Suburban Named Isabella 1966 Ford Mustang Mama's High School Graduation Present

09-03-2008, 08:41 AM	#5
gcburdic Restoration Virgin! Join Date: Jan 2008 Location: Huntersville, NC Posts: 8,298	Re: Charlotte Auto Fair Parts Here's a couple more things I can bring if anyone is still coming....don't let a little hurricane scare you!!! 1. PS Pump and bracket $40 2. assorted emblems $5 each 3. fan motor $15 4. air cleaner $30 5. upper and lower control arm bars $25 Attached Images __________________ Geoff with a G 1968 Chevy C10 SWB The Mistress 1972 Custom Deluxe C20 Suburban A Suburban Named Isabella 1966 Ford Mustang Mama's High School Graduation Present

09-03-2008, 03:58 PM	#6
gcburdic Restoration Virgin! Join Date: Jan 2008 Location: Huntersville, NC Posts: 8,298	Re: Charlotte Auto Fair Parts And some more parts....is there anyone going to the Charlotte Auto Fair this weekend that would like me to bring any of this stuff???.....Does anyone else have anything they want to bring to sell....then POST IT HERE!!!! I hope I'm not the only one there....the hurricane won't hurt you!!! 1. 72 gas pedal assembly $15 2. dash pad (been recovered by PO, but needs re-doing) $30 3. radio patch area $20 Attached Images __________________ Geoff with a G 1968 Chevy C10 SWB The Mistress 1972 Custom Deluxe C20 Suburban A Suburban Named Isabella 1966 Ford Mustang Mama's High School Graduation Present

09-03-2008, 11:11 PM	#7
tommypic Registered User Join Date: Jan 2008 Location: Piedmont , SC Posts: 728	Re: Charlotte Auto Fair Parts I got a few parts I will be there on Friday not bringing if not SOLD 1- Both Doors with Glass minimal surface rust small hole in bottom L/S $ 250 2- New Tri-Auto Vent Glass Tinted L/R $ 30 3- 2- 3 on Tree Columns $ 25 4- under dash a/c $ 25 5- manual steering box $ 15 6- 3 GM radios don't know a thing about them make me a offer 7- 5 Chevy Center Caps need cleaning up been on shelf 1 Bent $ 60 obo 8- 4 beauty rings 2 different pairs $ 30 9 - 72 Clear Big Back Glass Stain in center Put Chevy Sticker over it $ 10 10- some Custom C/10 Chrome let me know what you want I will check condition and get pic and price 11- New 67-68 Camaro Part # 3927425 Left front inner skirt GM $ 100 link to pics http://s70.photobucket.com/albums/i1...%20For%20Sale/ Attached Images __________________ My ZipCode = 29673 2008 Silverado Z71 LTZ Wrecked New Ride SOLD 71-72 Custom A/C Parts Truck < selling parts 67 Chevy ShortStep SOLD 67 GMC SWB Step <-- For Sell 67 Chevy SWB Step <-- working on 2000 Road King <-- SOLD 97 F150 my ride for now 2006 Escape wifes ride HELP SUPPORT THE BOARD http://67-72chevytrucks.com/vboard/payments.php Great How To Thread http://67-72chevytrucks.com/vboard/s...d.php?t=157669 Vendor Sites http://67-72chevytrucks.com/links/browselinks.php?c=2 Last edited by tommypic; 09-04-2008 at 06:46 AM.

09-04-2008, 12:55 AM	#8
71chevytruckguy Registered User Join Date: Jul 2005 Location: Kernersville, NC Posts: 599	Re: Charlotte Auto Fair Parts i need a set of 4 core raditators mounts, holley blue pump and regulator, and a set of accel 8.8mm plug wires. ill either be there on friday or sunday, aint sure yet. thanks. chris. __________________ its a work in progess. 71 c-10 lwb, in the middle of frame off restoration. 69 c-10 swb, drag truck, 406 sbc, balanced, comp 292 cam, ported, polished, gasket matched, and bowl blended pro comp 210cc heads, 2.02/1.60 ferrea valves,1.6 roller rockers, re curved hei with msd 6al box, 2-step rev limter, accel 300+ wires, ported victor jr intake, holley 750 double pumper carb, dynomax 1 5/8 headers, 4 spd munci m-20 with super case and iron midplate, mr. gasket vertigate shifter, 5.38 pro gears with full spool, 33 spline moser axles and c-clip elimators, line-loc, 5 gal fuel cell, holley blue pump. 7.807 @ 88.37mph 1.60 60FT 80 g-20 van, tow rig, cammed 305, th350, 10 bolt 88 jeep wrangler, dd, 258, ax-15 swap, 4.5" lift, 33x12.50's, lockers, 3.55's

09-04-2008, 12:59 AM	#9
71chevytruckguy Registered User Join Date: Jul 2005 Location: Kernersville, NC Posts: 599	Re: Charlotte Auto Fair Parts gcburdic, what space you gonna be in, might take those inner fenders off ya. thanks. chris. __________________ its a work in progess. 71 c-10 lwb, in the middle of frame off restoration. 69 c-10 swb, drag truck, 406 sbc, balanced, comp 292 cam, ported, polished, gasket matched, and bowl blended pro comp 210cc heads, 2.02/1.60 ferrea valves,1.6 roller rockers, re curved hei with msd 6al box, 2-step rev limter, accel 300+ wires, ported victor jr intake, holley 750 double pumper carb, dynomax 1 5/8 headers, 4 spd munci m-20 with super case and iron midplate, mr. gasket vertigate shifter, 5.38 pro gears with full spool, 33 spline moser axles and c-clip elimators, line-loc, 5 gal fuel cell, holley blue pump. 7.807 @ 88.37mph 1.60 60FT 80 g-20 van, tow rig, cammed 305, th350, 10 bolt 88 jeep wrangler, dd, 258, ax-15 swap, 4.5" lift, 33x12.50's, lockers, 3.55's

10-07-2008, 04:09 PM	#12
SANTO.DE.ORO Registered User Join Date: Feb 2008 Location: Laredo, Texas Posts: 13	Re: Charlotte Auto Fair Parts gc already have the 72 grill?

10-08-2008, 10:01 AM	#14
SANTO.DE.ORO Registered User Join Date: Feb 2008 Location: Laredo, Texas Posts: 13	Re: Charlotte Auto Fair Parts can ship to texas? plz...

10-09-2008, 07:55 AM	#15
gcburdic Restoration Virgin! Join Date: Jan 2008 Location: Huntersville, NC Posts: 8,298	Re: Charlotte Auto Fair Parts Santo, I am not going to ship....heard way too many bad stories about these things getting beat up during shipping even if they are packaged well!...If I did package it'll cost just as much to ship as the price of the part...not a good deal for you! Sorry... __________________ Geoff with a G 1968 Chevy C10 SWB The Mistress 1972 Custom Deluxe C20 Suburban A Suburban Named Isabella 1966 Ford Mustang Mama's High School Graduation Present

10-09-2008, 09:57 AM	#16
SANTO.DE.ORO Registered User Join Date: Feb 2008 Location: Laredo, Texas Posts: 13	Re: Charlotte Auto Fair Parts ok thanks

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.