Muncie 4-speed with a bench seat? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Jefe · 11-17-2002, 08:10 PM

Is it possible to put a muncie in my 68 with my bench seat? Special shifter that curves around perhaps? Know where to get one? Thanks Guys!!

crazy longhorn · 11-17-2002, 08:27 PM

I would go for the 57 chev (car) linkage that Shadetree suggested. It comes up under the front edge of the seat, & curves foward & up /around the seat. I prefer hurst linkage myself, & would rather get it at a swap meet(much cheaper that way), but Mr gasket owns Hurst as well as a bunch of other well known names. that may be a place to start.......I dont think they deal direct, but will give you part numbers & retail sales stores. Good luck........longhorn

Hooter · 11-18-2002, 12:25 AM

the shifter in my ford is shaped like a Z.Try to find a shifter from a 3 speed O.D. Tranny

fast_dev · 11-18-2002, 12:27 AM

hurst sells competition plus shifters for our trucks, they have a tall curved handle to clear the seat. Dev.

Jefe · 11-19-2002, 12:09 AM

Don't happen to know the part number of the Hurst shifter do you?

KEH · 02-16-2003, 06:47 PM

Jefe, try this:

Shifter
http://store.summitracing.com/partdetail.asp?part=25055

Install kit
http://store.summitracing.com/partde...57#largerimage

Boot
http://store.summitracing.com/partde...57#largerimage

I think I'm going to order it today. $281.85 total.

Anyone know where to find it cheaper?

mooneyes · 02-16-2003, 06:51 PM

i'm running a hurst 3 speed floor stick with mine ......works great

Lightspeed · 02-16-2003, 07:24 PM

i have a muncie four speed with a hurst shifter in mine, it just barely clears the seat tho.

knucklebuster · 02-16-2003, 08:11 PM

the seat in my truck was curved in to accomodate a 4 speed although it didn't come this way it looks good

KEH · 02-16-2003, 11:49 PM

I placed my order with Summit Racing & they just called me back to confirm my order -- on a Sunday night! It's in stock & shipping in the morning.

Just thought I'd pass along their good service.

11-17-2002, 08:10 PM	#1
Jefe Registered User Join Date: Jul 2000 Location: Chandler, Arizona, USA Posts: 299	Muncie 4-speed with a bench seat? Is it possible to put a muncie in my 68 with my bench seat? Special shifter that curves around perhaps? Know where to get one? Thanks Guys!!

11-17-2002, 08:27 PM	#2
crazy longhorn Fabricate till you "puke" Join Date: Jun 2002 Location: Ill Posts: 9,402	I would go for the 57 chev (car) linkage that Shadetree suggested. It comes up under the front edge of the seat, & curves foward & up /around the seat. I prefer hurst linkage myself, & would rather get it at a swap meet(much cheaper that way), but Mr gasket owns Hurst as well as a bunch of other well known names. that may be a place to start.......I dont think they deal direct, but will give you part numbers & retail sales stores. Good luck........longhorn __________________ 69 longhorn,4" chop,3/5 drop, 1/2 ton suspension/disc brakes,1 1/2" body drop,steel tilt clip, 5.3/Edelbrock rpm intake/600 carb, Hooker streetrod shorties,2 1/2" exhaust/ H pipe/50's Flows , 6 spd Richmond trans,12 bolt/ 3.40 gears....

11-18-2002, 12:25 AM	#3
Hooter My other Love Join Date: Aug 2001 Location: Castlegar B.C. Canada Posts: 4,085	the shifter in my ford is shaped like a Z.Try to find a shifter from a 3 speed O.D. Tranny __________________ Castlegar B.C.The great white North (Canada Eh!) Hooter_5@hotmail.com First generation Monte Carlo club pictures of my life

11-18-2002, 12:27 AM	#4
fast_dev Registered User Join Date: Dec 2000 Location: Ringtown,PA Posts: 555	hurst sells competition plus shifters for our trucks, they have a tall curved handle to clear the seat. Dev. __________________ 68 chevy 406 small block, budget drag racer, new best e.t 11.91 @112 67 nova numbers matching 327 4 speed 13.6 @ 102mph 70 longhorn c-30 402/4 speed 70 c-10 swb 402, muncie 4 speed 94 s-10 350/th350 3:73 posi 71 c-20 402/th400 towrig for racetruck. 72 4wd lifted on 35's 72 350/3 speed winter beater

02-16-2003, 06:47 PM	#6
KEH Better late than never Join Date: Dec 2001 Location: Columbus, IN Posts: 324	Jefe, try this: Shifter http://store.summitracing.com/partdetail.asp?part=25055 Install kit http://store.summitracing.com/partde...57#largerimage Boot http://store.summitracing.com/partde...57#largerimage I think I'm going to order it today. $281.85 total. Anyone know where to find it cheaper? __________________ 1970 C/10 SWB Stepside

11-19-2002, 12:09 AM	#5
Jefe Registered User Join Date: Jul 2000 Location: Chandler, Arizona, USA Posts: 299	Don't happen to know the part number of the Hurst shifter do you?

02-16-2003, 06:51 PM	#7
mooneyes Registered User Join Date: Jan 2002 Location: Slippery Rock PA USA Posts: 1,692	i'm running a hurst 3 speed floor stick with mine ......works great __________________ Ken Lyons, Slippery rock pa 68 short step 327 t10 4 gear 72 2wd blazer project 70 lwb 305/700r driver 78 caprice project 02 cavalier D.D ( hate it!!)

02-16-2003, 07:24 PM	#8
Lightspeed Registered User Join Date: Oct 2002 Location: Virginia Posts: 226	i have a muncie four speed with a hurst shifter in mine, it just barely clears the seat tho.

02-16-2003, 08:11 PM	#9
knucklebuster Failure is NOT an option! Join Date: Feb 2003 Location: greenwood s.c. Posts: 811	the seat in my truck was curved in to accomodate a 4 speed although it didn't come this way it looks good __________________ House payment or truck parts?????.........why does life have to be so complicated? 1969 Chevy Shortbed Fleetside 1969 Camaro ps pb a/c(drove in high school now it's just a yard ornament,but it's next on the list for resto) 1990 Ni$$an hardbody( daily beater that has been really beaten!) 1999 Grand Am GT(wifes ride...never buy a pontiac!!Trust Me)

02-16-2003, 11:49 PM	#10
KEH Better late than never Join Date: Dec 2001 Location: Columbus, IN Posts: 324	I placed my order with Summit Racing & they just called me back to confirm my order -- on a Sunday night! It's in stock & shipping in the morning. Just thought I'd pass along their good service. __________________ 1970 C/10 SWB Stepside

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.