Project C-10 Stepper. In TN. - The 1947 - Present Chevrolet & GMC Truck Message Board Network

ATT · 09-24-2008, 07:22 PM

Here are some pictures of the truck I have been trying to put together for the past 2 years. It started all in peices from when I bought the truck. This is what it looked like when I first got it. Name: 001.jpg
Views: 1504
Size: 47.6 KB

ATT · 09-24-2008, 07:24 PM

Then I sandblasted the frame. Name: 002.jpg
Views: 1492
Size: 39.7 KB

primer and painted it.

FREEMAN70 · 09-24-2008, 07:30 PM

LOOKS GOOD KEEP IT UP,

KEEP THE PICS ROLLING!

ATT · 09-24-2008, 07:32 PM

To make a long story short. It now has a mustang II front suspension from fatmans with the stainless upper and lower control arms. Rear suspension is the air ride trailing arm setup. I have put a 350/290hp and a 700r. All stainless exhaust. Here are some pictures of it. Name: 100_4939.JPG
Views: 1487
Size: 31.1 KB

Name: 100_4939.JPG
Views: 1487
Size: 31.1 KB

Name: 100_4935.JPG
Views: 1490
Size: 69.2 KB

Name: 100_4937.JPG
Views: 1477
Size: 65.5 KB

Name: 100_4936.JPG
Views: 1481
Size: 65.8 KB

**70cst** · 09-24-2008, 07:33 PM

Very Impressive ATT

ATT · 09-24-2008, 07:36 PM

I just got a better cab and I am working on it now. Name: 2588190167_b2ed5a2746.jpg
Views: 1452
Size: 55.5 KB

Name: 100_4931.JPG
Views: 1453
Size: 52.8 KB

Name: 100_4924.JPG
Views: 1452
Size: 43.1 KB

Name: 100_4922.JPG
Views: 1449
Size: 43.3 KB

Name: 100_4932.JPG
Views: 1449
Size: 53.7 KB

mixermike · 09-24-2008, 07:41 PM

nice work brother

ATT · 09-24-2008, 07:42 PM

More picture of the cab. The only bad spot on it was the driverside cab corner. My plans are to smooth the firewall and try to get it ready for paint this winter.

ATT · 09-24-2008, 07:48 PM

Name: 100_4951.JPG
Views: 1241
Size: 41.8 KB

Name: 2589032876_86784ef4bf.jpg
Views: 1378
Size: 66.9 KB

Name: 2589024638_eb33565375.jpg
Views: 1377
Size: 69.3 KB

ATT · 09-24-2008, 07:55 PM

ATT · 09-24-2008, 08:28 PM

**Boog** · 09-24-2008, 08:32 PM

I wish I had room for a herd of old trucks too.

Does that fatman front end have provisions for a sway bar?

red69ss · 09-24-2008, 08:39 PM

nice looking chassis where did you get the radiator setup? also what are you painting frame with? thats a nice looking junkyard in the background there if thats what it is.

toomanytoyz · 09-24-2008, 10:53 PM

Quote:

Originally Posted by red69ss

thats a nice looking junkyard in the background there if thats what it is.

Maybe it's From a Swapmeet???????

Rick

tdave00 · 09-25-2008, 03:53 AM

Now you are just rubbing it in

.

ATT · 09-25-2008, 08:18 AM

Quote:

Originally Posted by Boog

I wish I had room for a herd of old trucks too.

Does that fatman front end have provisions for a sway bar?

I only wish I had all those trucks. They belong to a guy in east knoxville TN. I just bought the cab from him. The fatman front suspension has the provisions for a sway bar I have one on it.

ATT · 09-25-2008, 08:22 AM

Quote:

Originally Posted by red69ss

nice looking chassis where did you get the radiator setup? also what are you painting frame with? thats a nice looking junkyard in the background there if thats what it is.

Thank you, red69ss. The radiator setup came from ebay. The paint on the frame is just dupli-color rattle can. The trucks in the backgroud are in east knoxville, TN. at a place called the truck farm. He has about 60 trucks and all kinds of parts.

woodridge · 09-25-2008, 08:59 AM

You are going to have one nice truck there when you are done. The trucks in the background look like TNCHEV up in Kodak.

ATT · 09-25-2008, 05:56 PM

Quote:

Originally Posted by woodridge

You are going to have one nice truck there when you are done. The trucks in the background look like TNCHEV up in Kodak.

Thanks woodridge, The trucks are in Kodak you are right on that. TNCHEV

red69ss · 09-25-2008, 08:04 PM

seen those radiators on ebay the other day wondered if anyone on here had tried one ,had a really good price on them for alum especially ,interested to see how well it works

FRENCHBLUE72 · 09-28-2008, 07:31 PM

Sweet looking set-up kepp up the great work.

bad6772 · 09-28-2008, 08:14 PM

Awesome Truck....And Great work.Few questions....What headers are you running....And where was the fuel tank purchased...

ATT · 09-29-2008, 06:07 AM

Quote:

Originally Posted by bad6772

Awesome Truck....And Great work.Few questions....What headers are you running....And where was the fuel tank purchased...

Thanks bad6772, the headers are sanderson bought from early classic and the fuel cell is a 16 gallon bought from summit racing.

bad6772 · 09-29-2008, 06:25 AM

Thanks....Was wondering....Do you have part #s on both....

ATT · 09-29-2008, 05:18 PM

The part#'s for the fuel cell SUM-290104 measurements 25x17x9. mounts for the fuel cell part# SUM-290154. The headers part# 11-6572HDRS.

09-24-2008, 07:22 PM	#1
ATT Registered User Join Date: Jul 2007 Location: Manchester, TN Posts: 136	Project C-10 Stepper. In TN. Here are some pictures of the truck I have been trying to put together for the past 2 years. It started all in peices from when I bought the truck. This is what it looked like when I first got it.

09-24-2008, 07:24 PM	#2
ATT Registered User Join Date: Jul 2007 Location: Manchester, TN Posts: 136	Re: Project C-10 Stepper. In TN. Then I sandblasted the frame. primer and painted it.

09-24-2008, 07:30 PM	#3
FREEMAN70 Registered User Join Date: Apr 2007 Location: robbins Posts: 73	Re: Project C-10 Stepper. In TN. LOOKS GOOD KEEP IT UP, KEEP THE PICS ROLLING!

09-24-2008, 07:32 PM	#4
ATT Registered User Join Date: Jul 2007 Location: Manchester, TN Posts: 136	Re: Project C-10 Stepper. In TN. To make a long story short. It now has a mustang II front suspension from fatmans with the stainless upper and lower control arms. Rear suspension is the air ride trailing arm setup. I have put a 350/290hp and a 700r. All stainless exhaust. Here are some pictures of it. Last edited by ATT; 09-24-2008 at 08:26 PM.

09-24-2008, 07:33 PM	#5
70cst Senior Member Join Date: Feb 2001 Location: New Madison, Ohio Posts: 21,373	Re: Project C-10 Stepper. In TN. Very Impressive ATT __________________ A husband can be right...or...A husband can be happy. 67-72 Chevy and GMC Trucks...The Classic Truck for the Classic Folk. 1970 CST Two tone green, 402BB, 400 Automatic, Tach, Buckets, AC, AM-FM, Tilt, GM CB, GM 8 Tract, LWB, etc JOHN 17:3...The better side of "LIFE" Remember: Everyday is a good day...Some are just gooder!

09-24-2008, 07:36 PM	#6
ATT Registered User Join Date: Jul 2007 Location: Manchester, TN Posts: 136	Re: Project C-10 Stepper. In TN. I just got a better cab and I am working on it now.

09-24-2008, 07:41 PM	#7
mixermike Registered User Join Date: Jan 2008 Location: Post Falls, Idaho Posts: 606	Re: Project C-10 Stepper. In TN. nice work brother

09-24-2008, 07:42 PM	#8
ATT Registered User Join Date: Jul 2007 Location: Manchester, TN Posts: 136	Re: Project C-10 Stepper. In TN. More picture of the cab. The only bad spot on it was the driverside cab corner. My plans are to smooth the firewall and try to get it ready for paint this winter.

09-24-2008, 07:48 PM	#9
ATT Registered User Join Date: Jul 2007 Location: Manchester, TN Posts: 136	Re: Project C-10 Stepper. In TN. Last edited by ATT; 09-25-2008 at 08:16 PM.

09-24-2008, 07:55 PM	#10
ATT Registered User Join Date: Jul 2007 Location: Manchester, TN Posts: 136	Re: Project C-10 Stepper. In TN.

09-24-2008, 08:28 PM	#11
ATT Registered User Join Date: Jul 2007 Location: Manchester, TN Posts: 136	Re: Project C-10 Stepper. In TN.

09-24-2008, 08:32 PM	#12
Boog laying low Join Date: Mar 2001 Location: Searcy, Ark. USA Posts: 13,513	Re: Project C-10 Stepper. In TN. I wish I had room for a herd of old trucks too. Does that fatman front end have provisions for a sway bar? __________________ Boog 69 Chevy stepside, 358/T350, 4.11 posi, 4.5/4 drop, rallys, poboy driver primer is finer 91 Chevy sportside, Tahoe, Yukon & GMC Crewcab All GM..'nuff said. I stand for the flag and kneel at the cross

09-24-2008, 08:39 PM	#13
red69ss Burnouts are therapeutic Join Date: Jun 2007 Location: lancaster, south carolina Posts: 852	Re: Project C-10 Stepper. In TN. nice looking chassis where did you get the radiator setup? also what are you painting frame with? thats a nice looking junkyard in the background there if thats what it is. __________________ 1969 CHEVELLE SS 1972 C10 ALMOST DAILY DRIVER 1968 C10 RUSTBUCKET (MISSION IMPOSSIBLE) 1972 PONTIAC LEMANS CONVERTIBLE (WIFE'S CAR) "My wife and I were happy for twenty years. Then we met." - Rodney Dangerfield "The difference between genius and stupidity is that genius has its limits." - Einstein

09-25-2008, 03:53 AM	#15
tdave00 Restoring a 68 SWB Join Date: Jan 2008 Location: Nashville, TN Posts: 1,068	Re: Project C-10 Stepper. In TN. Now you are just rubbing it in . __________________ My Build Thread: Lucy - My 1968 SWB - Shop Truck Style North Nashville Concrete Contractor

09-25-2008, 08:59 AM	#18
woodridge Senior Member Join Date: Feb 2005 Location: Maynardville, Tn Posts: 3,030	Re: Project C-10 Stepper. In TN. You are going to have one nice truck there when you are done. The trucks in the background look like TNCHEV up in Kodak. __________________ SEMA Network- Protect our Hobby! 71 C30 in pieces, starting to come together. Click here for A Place For Tennessee Truck Enthusiest To Meet



Register or Log In To remove these advertisements.

09-25-2008, 08:04 PM	#20
red69ss Burnouts are therapeutic Join Date: Jun 2007 Location: lancaster, south carolina Posts: 852	Re: Project C-10 Stepper. In TN. seen those radiators on ebay the other day wondered if anyone on here had tried one ,had a really good price on them for alum especially ,interested to see how well it works __________________ 1969 CHEVELLE SS 1972 C10 ALMOST DAILY DRIVER 1968 C10 RUSTBUCKET (MISSION IMPOSSIBLE) 1972 PONTIAC LEMANS CONVERTIBLE (WIFE'S CAR) "My wife and I were happy for twenty years. Then we met." - Rodney Dangerfield "The difference between genius and stupidity is that genius has its limits." - Einstein

09-28-2008, 07:31 PM	#21
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,606	Re: Project C-10 Stepper. In TN. Sweet looking set-up kepp up the great work. __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

09-28-2008, 08:14 PM	#22
bad6772 Official Site Guitar Shredder Join Date: May 2006 Location: Oz Posts: 3,955	Re: Project C-10 Stepper. In TN. Awesome Truck....And Great work.Few questions....What headers are you running....And where was the fuel tank purchased...

09-29-2008, 06:25 AM	#24
bad6772 Official Site Guitar Shredder Join Date: May 2006 Location: Oz Posts: 3,955	Re: Project C-10 Stepper. In TN. Thanks....Was wondering....Do you have part #s on both....

09-29-2008, 05:18 PM	#25
ATT Registered User Join Date: Jul 2007 Location: Manchester, TN Posts: 136	Re: Project C-10 Stepper. In TN. The part#'s for the fuel cell SUM-290104 measurements 25x17x9. mounts for the fuel cell part# SUM-290154. The headers part# 11-6572HDRS.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.