![]() |
Register or Log In To remove these advertisements. |
|
|
![]() |
|
Thread Tools | Display Modes |
![]() |
#1 |
Account Suspended
Join Date: May 2000
Location: IL
Posts: 0
|
![]()
uhmmm crap, i popped out my VIN rivet stems just now and the flew out and landed i dont know where, tried big speaker magnet in the dirt and such and dont know if maybe the arent steel ? i looked back there inside the rivets to check and they looked like dark metal, so i assumed steel, anyone know ?
thanks ------------------ Randy- Lincoln, IL randy@ccaonline.com 2177353230 *many GM parts bought, traded, or sold -am parting out: '81 Cutlass Supreme Brougham current fleet: -71 C-10 350/CH465/3.07- basketcase, #1 -90 Cavalier 2.2L sky blue, a driver -84 Z28 5.0L/700R4/3.73 daily driver -84 Firebird/SE 2.8L/T-5/3.73/engine bad, project #2 -82 purple Trans Am, project #3 *Paint is overrated* © RSS Enterprises 2000 [This message has been edited by Fast68Chevy (edited May 08, 2002).] |
![]() |
![]() |
![]() |
#2 |
Registered User
Join Date: May 2002
Location: Wingate NC
Posts: 456
|
![]()
I thought they were aluminum?
let me know if you find out diffrent.
__________________
Life is good with a 6-71 supercharged 355 in a 72 camaro ![]() |
![]() |
![]() |
![]() |
#3 |
Senior Member
![]() Join Date: Mar 2001
Location: Cedar Park, TX
Posts: 686
|
![]()
They are most likely aluminum, putting a
steel shaft inside an aluminum rivet would pull completely thru before it broke. ------------------ 71 Chevy C-10 SWB Fleetside WAS:307w/3-on-the-tree NOW:350TBI/700R4/3.73 See it at www.prismnet.com/~grzanich
__________________
71 Chevy C-10 SWB Fleetside RamJet-350/4L60e & Compushift/3.73Posi See it at www.prismnet.com/~grzanich |
![]() |
![]() |
![]() |
#4 |
Registered User
Join Date: Jul 2001
Location: prophetstown,IL.
Posts: 40
|
![]()
So now that you got it out where do you get replacements? They look different than just run of the mill rivets.
__________________
Prophetstown, IL. The ark was built by amatures the titanic by professionals |
![]() |
![]() |
![]() |
#5 |
Account Suspended
Join Date: May 2000
Location: IL
Posts: 0
|
![]()
they dont break they are cut off by the tool, at least thats what it looks like when you look at the end of them after theyve been used
i am saving the rivet bodies, just not the stems, well i was gonna try to save stems, but cant fin them, dmaned things.. ------------------ Randy- Lincoln, IL randy@ccaonline.com 2177353230 *many GM parts bought, traded, or sold -am parting out: '81 Cutlass Supreme Brougham current fleet: -71 C-10 350/CH465/3.07- basketcase, #1 -90 Cavalier 2.2L sky blue, a driver -84 Z28 5.0L/700R4/3.73 daily driver -84 Firebird/SE 2.8L/T-5/3.73/engine bad, project #2 -82 purple Trans Am, project #3 *Paint is overrated* © RSS Enterprises 2000 |
![]() |
![]() |
![]() |
#6 |
Senior Member
![]() Join Date: Dec 1999
Location: Darrington, Washington
Posts: 3,963
|
![]()
the heads are aluminum,i think the whole things are id have to go out and look at a cab vin tag area i have cut out.I have those rivets if your intrested in them.
|
![]() |
![]() |
![]() |
#7 |
Registered User
Join Date: May 2002
Location: illinois
Posts: 11
|
![]()
hope you guys know its illegal to mess with those rosette rivets. snow man
|
![]() |
![]() |
![]() |
#8 |
Senior Member
![]() Join Date: Dec 1999
Location: Darrington, Washington
Posts: 3,963
|
![]()
Yeah but so is jaywalking.aslong as its not trying to hide a stolen vehicle or something i dont see the harm in it.
|
![]() |
![]() |
![]() |
#9 |
Vortec 350's Suck
Join Date: Nov 2000
Location: Pickardville Alberta Canada
Posts: 544
|
![]()
If everyone was lucky enough to have a salvagealbe cab on there truck messing with those rivits would never be a factor. I however am not that lucky and my trucks cab is garbage and too far gone to be repaired and it will be replaced with another one I have. I will just purchase the correct rivits and put the VIN plate on the new cab. I really don't care, nothing is stolen, and once its on there who is going to be able to tell its been changed. I don't see what the big deal is, if your cab is toast and you have a better one, why not change it, my truck isn't a numbers machine and to me it doesn't matter. The cab replacing mine by the way doesn't have a VIN plate on it and thats how I got it so whatever, to each there own, but sometimes there isn't much choice, and I don't see that changing the cab is any different than changing any other piece of the truck anyhow.
------------------ 69 CST 10, 402, steel crank, heavy rods, Federal Mogul Forged Pistons, 9.9:1 compression, polished ported 781 heads 2.19/1.88 manley stainless valves, Crane Powermax Hydraulic roller 288/296 and .587,.610 lift, hardened pushrods, Crane Roller Rockers, Weiand Action Plus, 750CFM Rochester QJET, MSD HEI, MSD 8MM Wires, Dynomax Ceramic coated headers, should be about 500 H.P. 700R4 2500 stall, pretty nasty shift kit, 373 Auburn Pro Series Posi, buckets/console air/tilt/tach 4wheel discs Daily Driver: 92 Chev Reg Cab LWB Silverado 4x4, loaded, 350 Accel filter/cap/rotor/coil/AC Delco wires/AC Delco RapidFire plugs, Edelbrock intake and headers, 180 degree thermostat, Hypertech Thermomaster Chip, true duals 700R4 with B@M Shift Kit for now!
__________________
69 Chev CST 10 reg cab lwb Daily Driver: 92 Chev Reg Cab LWB Silverado 4x4, K.I.A 7:51 AM 04/22/03 Will be resurrected |
![]() |
![]() |
![]() |
#10 |
Registered User
Join Date: Oct 2001
Location: SW Washington
Posts: 1,006
|
![]()
I agree with Chevyman. Could someone e-mail me the information on where to purchase new rivets exactly like the original factory ones? darrengale67@hotmail.com
Thanks, Darren
__________________
Washington State 1967 Chevy C10 LWB Rodstoration In Progress. 1972 K20 Cheyenne Super |
![]() |
![]() |
![]() |
#11 |
Senior Member
Join Date: Dec 2000
Location: Colwich,Kansas
Posts: 713
|
![]()
I thought www.trimtags.com had them?
I've got cab #4 on my 67 4x4 as of now, switch cabs every 4 years or so for a new face lift. Had it as a '69 first 3 cabs, now a '67. Dont really give a shi.. what anyone thinks about legality or not, it's mine and dont ever plan on selling it, my .02
__________________
67 3/4 4x4 402,a/t,flat bed 98 GMC Sierra swb daily driver 87 burb parting out. 68 1/2 chevy, 350/350, 71 gmc frame, kid's beater 69 1ton 396-4sp, dump 69 swb stepside 396/400th current frameup 67 swb 454/400th rebuilding now, oldest boy just rolled it 99,HD, Road King Classic Colwich Ks |
![]() |
![]() |
![]() |
#12 |
Senior Member
![]() Join Date: Dec 1999
Location: Darrington, Washington
Posts: 3,963
|
![]() |
![]() |
![]() |
![]() |
#13 |
Never too many LONGHORNS!
Join Date: Dec 1999
Location: Los Angeles Calififornia
Posts: 423
|
![]()
Has anyone ever purchased these "rivets" from Trimtags before? I asked them once if they could send me a picture of one so I could verify if they are infact the same as the ones on our 67-72 trucks, They replied "they do NOT have a picture of one and would not take one for me." I think that sounds kind of fishy to me! It makes me wonder if they are the correct ones or not? I wasn't going to spend $20 on 2 rivets if they can't even send me a picture of just 1 to confirm that they are the correct ones. Has any one else done business with them? I am kind of curious.
__________________
Always looking for N.O.S. parts for my 1968 Longhorn and Looking for an awesome 1969 Longhorn that deserves to be restored....of course with N.O.S. parts!!! ![]() |
![]() |
![]() |
![]() |
#14 |
Registered User
Join Date: Oct 2001
Location: SW Washington
Posts: 1,006
|
![]()
Their web page suggests you epoxy in the new rivets! What the he!! I agree. Sounds fishey. Although, maybe they are not really sopposed to be selling rivets like that, and thats why they won't send pix? Just a guess.
Darren
__________________
Washington State 1967 Chevy C10 LWB Rodstoration In Progress. 1972 K20 Cheyenne Super |
![]() |
![]() |
![]() |
#15 |
Account Suspended
Join Date: May 2000
Location: IL
Posts: 0
|
![]()
they show pic of a tag with the rivets on
you can save the old rivet bodies, its not hard.,,., just push the stems out with a finish nail and hammer,... i just need to fina way to replace stems with some others, not sure if will work or not, the plate is still on the metal tight even with stems removed, i just need to get the rivet bodies off without hurting them, [This message has been edited by Fast68Chevy (edited May 08, 2002).] |
![]() |
![]() |
![]() |
#16 |
Never too many LONGHORNS!
Join Date: Dec 1999
Location: Los Angeles Calififornia
Posts: 423
|
![]()
When I went to their website.......I didn't see any pics of the rivets. That's why I originally called them in the first place, and that is when they told me they didn't have pics and would not take a pic to send me. I am not sure where you saw that pic of the rivet?? Maybe I am/was looking in the wrong place????
__________________
Always looking for N.O.S. parts for my 1968 Longhorn and Looking for an awesome 1969 Longhorn that deserves to be restored....of course with N.O.S. parts!!! ![]() |
![]() |
![]() |
![]() |
#17 |
Never too many LONGHORNS!
Join Date: Dec 1999
Location: Los Angeles Calififornia
Posts: 423
|
![]()
Fast68Chevy,
Good luck in trying to remove the rivet "bodies" out with out damaging or grinding the back off!......That is a pain in the a$$ and almost impossible! It sounds easy, but it really is not! The rivet stem that you lost "mushrooms" out the rivet body so you will not just be able to push or tap the rivet body out! The stem is only needed to mushroom the body and is really no longer needed after that. Good luck anyways and keep us posted if you do remove them w/o damage.
__________________
Always looking for N.O.S. parts for my 1968 Longhorn and Looking for an awesome 1969 Longhorn that deserves to be restored....of course with N.O.S. parts!!! ![]() |
![]() |
![]() |
![]() |
#18 |
Registered User
Join Date: Feb 2001
Location: Sturgeon Bay , WI USA
Posts: 375
|
![]()
Why are you so worried about rivets?
|
![]() |
![]() |
![]() |
#19 |
Account Suspended
Join Date: Jun 2000
Location: over yonder
Posts: 14,270
|
![]()
im with misfits on this one.....why not just use stainless steel or aluminum pop rivets???
------------------ Keep On Truckin' Shane Athens, Alabama |
![]() |
![]() |
![]() |
#20 |
aka Crusher, Crushergmc
Join Date: Mar 2000
Location: Oregon
Posts: 1,834
|
![]()
Take a look at the rivets that hold your plate to the door jam, then you'll understand.
__________________
"KEEP IT DOWN!" 70 Jimmy 454 2wd 56 GMC Big Window "It's funny till someone gets hurt, then it's freakin' hilarious" |
![]() |
![]() |
![]() |
#21 |
Account Suspended
Join Date: May 2000
Location: IL
Posts: 0
|
![]()
some of us notice what others do not
actually they didnt have a pic of a loose rivet or anythig, they had a pic of a plate with rivet heads, [This message has been edited by Fast68Chevy (edited May 09, 2002).] |
![]() |
![]() |
![]() |
#22 | |
Account Suspended
Join Date: Jun 2000
Location: over yonder
Posts: 14,270
|
![]()
I know what they look like, but still dont understand why one could not use standard stainless steel or aluminum rivets to re-attach a VIN plate. As long as the VIN on the plate matches the one on the title/tag reciept, what difference does it make?
Quote:
Just wondering....... ------------------ Keep On Truckin' Shane Athens, Alabama [This message has been edited by Shane (edited May 09, 2002).] |
|
![]() |
![]() |
![]() |
#23 |
Registered User
Join Date: Aug 2001
Location: rock island,il,usa
Posts: 5,382
|
![]()
I have popped the tags on with stainless rivets from the hardware store,when swapping cabs. You CAN get your tit in a ringer for removing the tags,but my thoughts are that if the title,frame ,& cab # match........what are they gonna do? Spank you?........69longhorn,with a little "hills blood"
__________________
http://community.webshots.com/user/hotrodhorn |
![]() |
![]() |
![]() |
#24 |
Registered User
Join Date: Jun 2001
Location: Eastern Kansas
Posts: 488
|
![]()
He's not being anal about getting the correct style rivets. The rivets that hold the tag on are a special type that are observed by the state inspection people when they inspect a vehicle for titling purposes. If the original type of rivet is not there, they will consider the vehicle as being built and may assign an entirely new serial number to the vehicle. It can get to be a pain, they may search for other ID numbers on the vehicle or start making you prove where the parts came from that now no longer have the correct VIN on them. You may become "guilty" of something in their eyes.
------------------ '72 Cheyenne. AC, PS, PB, Rear slider window, tilt. Light yellow (grapefruit yellow according to new sales literature from '72) '70 Olds 442 convertible '70 Olds Rallye 350 '72 Olds Cutlass convertible
__________________
'72 Cheyenne. AC, PS, PB, Rear slider window, tilt. Light yellow (grapefruit yellow according to new sales literature from '72) '56 Chevy short step V-8 (My dad bought it new!!) '70 Olds 442 convertible '70 Olds Rallye 350 |
![]() |
![]() |
![]() |
#25 |
Registered User
Join Date: May 2002
Location: illinois
Posts: 11
|
![]()
fast as long as the plate is still attached the state boys will rerevit it back on for you and then there is no problem. you said it was still stuck so leave it alone and have them rerevit it for you. my best friend is the vin tag guy in macon county and says its no problem. call the man and make it legal. the snow man in mt. zion illinois
|
![]() |
![]() |
![]() |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|