Bucket seat floor support - The 1947 - Present Chevrolet & GMC Truck Message Board Network

1972CST · 10-09-2008, 04:57 AM

Anybody need a factory bucket seat floor support? Getting ready to haul off a parts blazer and I wasnt sure if its worth my time to cut it out? $50 plus ship.

**70cst** · 10-09-2008, 06:24 AM

I would think eventually you would have a buyer for this part. I don't think these are being sold by aftermarket vendors. JMHO

**special-K** · 10-09-2008, 07:07 AM

Cut it out.I`d buy it,but bad timing.I`m sure someone will take it if it`s not rusty.

**Gary 70 Jimmy** · 10-09-2008, 08:46 AM

Are the costom bucket seat floor supports differant from the utility buckets seats floor supports.

1972CST · 10-09-2008, 09:17 AM

Sorry about the confusion, this support is on the underside of the floor and adds support to the are of the floor where the front of the bucket seats bolt down. I will get a pic if possible- the tub is off the frame and sitting an a trailer. I will have to lift it up to get a pic but I will.

1972CST · 10-09-2008, 12:03 PM

Quote:

Originally Posted by Gary 70 Jimmy

Are the costom bucket seat floor supports differant from the utility buckets seats floor supports.

My guess is that they are all the same, just the seats are different.

69step4x4 · 10-09-2008, 01:22 PM

How much shipped to 97402 ? very interested

**GSFMECH** · 10-09-2008, 03:12 PM

I just put one of these in my truck to mount my buckets, it's worth saving this brace and also all of the nut plates that are welded to the bottom of the floor pan. The bench seats mount in a different location.

71HUGGER396 · 10-09-2008, 04:14 PM

Please put me in line for this, pending pics. Very interested. I'm going to be away for the weekend. Will not be near a computer until Monday night. As long as it is not rusted I'll take it if it gets to me. Shipping will be to 16055 Thank you

1972CST · 10-09-2008, 08:26 PM

Sorry guys, didnt get to get any pics. It has rained here all afternoon. Sat. will be my next chance to get over there and do anything.

(1st in line) 69step4x4- I can have this to your door for $75 total.

(2nd in line) 71HUGGER396- To your door for $70 if 69step4x4 backs out.

1972CST · 10-11-2008, 12:26 PM

Here are a few pics. It looks like this truck was undercoated, some surface rust but very solid.

**Classic Heartbeat** · 10-11-2008, 01:14 PM

These do have to be modified slightly to fit a pickup. I just sold a Blazer set to a customer of mine and he had to cut the ends off and fab up new ones. They will work, but do require some alterations. WES

1972CST · 10-11-2008, 06:32 PM

Thanks Wes, I thought it was a direct fit. Do you know any spacifics on where and what to do to make this work in a truck?

msgross · 10-11-2008, 06:47 PM

Quote:

Originally Posted by 1972CST

Thanks Wes, I thought it was a direct fit. Do you know any spacifics on where and what to do to make this work in a truck?

I have one that I took of my truck, not sure if the pics help but they are in my build thread in the last few pages of when I cut my old floor out.

1972CST · 10-12-2008, 09:29 AM

Thanks msgross- I didnt see any major differences?

I guess there is "some" modification required to use this in a truck, just dont know exactly what.
I will remove center brace and nut plates from old floor to keep shipping down. I can also glass bead blast nut plates to remove surface rust if you would like.
bump

1972CST · 10-13-2008, 03:04 PM

bump

budman k20 · 10-13-2008, 05:46 PM

Hi,
Will the seat brace work on my 72 K20 and can you give me a guesstimate on shipping to 55357 as I have a set of factory bucket seats I would like to install.

Thanks Bud

1972CST · 10-13-2008, 06:09 PM

Quote:

Originally Posted by budman k20

Hi,
Will the seat brace work on my 72 K20 and can you give me a guesstimate on shipping to 55357 as I have a set of factory bucket seats I would like to install.

Thanks Bud

This support will work in your truck w/ "some" modification. The problem is I dont know exactly what has to be modified. I am only passing along info from another member. I am going to research this and see what I can come up with.
$70 to your door.

budman k20 · 10-14-2008, 01:10 PM

I will take it even if it needs to be modified. Please send payment info.

Bud

1972CST · 10-14-2008, 08:27 PM

Sold- pending payment

10-09-2008, 04:57 AM	#1
1972CST Registered User Join Date: Mar 2008 Location: Concord NC Posts: 511	Bucket seat floor support Anybody need a factory bucket seat floor support? Getting ready to haul off a parts blazer and I wasnt sure if its worth my time to cut it out? $50 plus ship.

10-09-2008, 06:24 AM	#2
70cst Senior Member Join Date: Feb 2001 Location: New Madison, Ohio Posts: 21,373	Re: Bucket seat floor support I would think eventually you would have a buyer for this part. I don't think these are being sold by aftermarket vendors. JMHO __________________ A husband can be right...or...A husband can be happy. 67-72 Chevy and GMC Trucks...The Classic Truck for the Classic Folk. 1970 CST Two tone green, 402BB, 400 Automatic, Tach, Buckets, AC, AM-FM, Tilt, GM CB, GM 8 Tract, LWB, etc JOHN 17:3...The better side of "LIFE" Remember: Everyday is a good day...Some are just gooder!

10-09-2008, 07:07 AM	#3
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: Bucket seat floor support Cut it out.I`d buy it,but bad timing.I`m sure someone will take it if it`s not rusty. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

10-09-2008, 08:46 AM	#4
Gary 70 Jimmy Senior Member Join Date: Jan 2002 Location: Burghill, Ohio 44404 Posts: 3,401	Re: Bucket seat floor support Are the costom bucket seat floor supports differant from the utility buckets seats floor supports.

10-09-2008, 09:17 AM	#5
1972CST Registered User Join Date: Mar 2008 Location: Concord NC Posts: 511	Re: Bucket seat floor support Sorry about the confusion, this support is on the underside of the floor and adds support to the are of the floor where the front of the bucket seats bolt down. I will get a pic if possible- the tub is off the frame and sitting an a trailer. I will have to lift it up to get a pic but I will.

10-09-2008, 01:22 PM	#7
69step4x4 Registered User Join Date: Feb 2007 Location: Cottage Grove, Or Posts: 312	Re: Bucket seat floor support How much shipped to 97402 ? very interested __________________ Lowered 2002 PT Cruiser ONLY for mileage. 1969 Stepside 4x4 ( under construction )

10-09-2008, 03:12 PM	#8
GSFMECH On the road Join Date: Jan 2004 Location: NATCHITOCHES LOUISIANA Posts: 818	Re: Bucket seat floor support I just put one of these in my truck to mount my buckets, it's worth saving this brace and also all of the nut plates that are welded to the bottom of the floor pan. The bench seats mount in a different location. __________________ Mike Castro- 72 SWB. Ochre and White. 496/400 turbo, GV OD ,Dakota Digital dash , tilt, Vintage Air, PS, hydro boost, factory buckets, console, QA-1 Coil over suspension, 20/20"Billet Specialties Magnetos 72 SWB. Med blue. 454/400 turbo, tach, tilt, Stock AC, PS,PDB, factory buckets, console, ECE 4/6 drop w/ 2" blocks and C-notch, 20/20"Coys- Crashed and destroyed by drunk driver Sept 2019. New 72 build in the works. My new build thread "Castro" https://67-72chevytrucks.com/vboard/...d.php?t=820934 My old build thread, the blue truck http://67-72chevytrucks.com/vboard/s...d.php?t=271489 www.louisianaclassictruckclub.com

10-09-2008, 04:14 PM	#9
71HUGGER396 Confirmed Truckaholic Join Date: Oct 2000 Location: Sarver,PA 16055 Posts: 732	Re: Bucket seat floor support Please put me in line for this, pending pics. Very interested. I'm going to be away for the weekend. Will not be near a computer until Monday night. As long as it is not rusted I'll take it if it gets to me. Shipping will be to 16055 Thank you __________________ 1968 50th STEP SIDE SHORTY, 350/350, a/c, ps, p,b Daily Driver, 1970 Cst short fleet, all black, 350/350, 1970 2wd Blazer, 2wd, 6 cyl. 3 spd, original, now a 454, 350turbo, 3.73 posi, on the road 1971 2wd fleet shorty, 454, 700r4, 3.73 posi, SOLD to 67OLDSTYLE72 "My rig's a little old but that don't mean she's slow" - SAWYER BROWN's Six Days On The Road SEMPER FI "I use to be a lean mean fighting machine, but now I'm a huffin, puffin, over stuffin love muffin" Last edited by 71HUGGER396; 10-09-2008 at 04:16 PM. Reason: add info

10-09-2008, 08:26 PM	#10
1972CST Registered User Join Date: Mar 2008 Location: Concord NC Posts: 511	Re: Bucket seat floor support Sorry guys, didnt get to get any pics. It has rained here all afternoon. Sat. will be my next chance to get over there and do anything. (1st in line) 69step4x4- I can have this to your door for $75 total. (2nd in line) 71HUGGER396- To your door for $70 if 69step4x4 backs out. Last edited by 1972CST; 10-09-2008 at 08:36 PM.

10-11-2008, 12:26 PM	#11
1972CST Registered User Join Date: Mar 2008 Location: Concord NC Posts: 511	Re: Bucket seat floor support Here are a few pics. It looks like this truck was undercoated, some surface rust but very solid. Attached Images

10-11-2008, 01:14 PM	#12
Classic Heartbeat Project Junkie! Fishing Poor!! Join Date: Dec 1999 Location: Olympia,Wa. 98512 Posts: 10,766	Re: Bucket seat floor support These do have to be modified slightly to fit a pickup. I just sold a Blazer set to a customer of mine and he had to cut the ends off and fab up new ones. They will work, but do require some alterations. WES __________________ On-line catolog Classic Heartbeat Pickup Parts WEHEPP@comcast.net Call us Toll Free (888) 338-2502 Like Us on Facebook No appointment necessary. 72 BB Chevy Custom Deluxe / Custom Camper 67 I-6 (Soon to be 5.7 LS1) Panel 68 BB Chevy Short Bed 72 6.0 LQ9 Short Bed Chevy 4X4 Olympia's fastest growing truck parts supplier. Olympia's home for Wayward Chevys

10-11-2008, 06:32 PM	#13
1972CST Registered User Join Date: Mar 2008 Location: Concord NC Posts: 511	Re: Bucket seat floor support Thanks Wes, I thought it was a direct fit. Do you know any spacifics on where and what to do to make this work in a truck?

10-12-2008, 09:29 AM	#15
1972CST Registered User Join Date: Mar 2008 Location: Concord NC Posts: 511	Re: Bucket seat floor support Thanks msgross- I didnt see any major differences? I guess there is "some" modification required to use this in a truck, just dont know exactly what. I will remove center brace and nut plates from old floor to keep shipping down. I can also glass bead blast nut plates to remove surface rust if you would like. bump Last edited by 1972CST; 10-12-2008 at 09:34 AM.

10-13-2008, 03:04 PM	#16
1972CST Registered User Join Date: Mar 2008 Location: Concord NC Posts: 511	Re: Bucket seat floor support bump

10-13-2008, 05:46 PM	#17
budman k20 1972 K20 Join Date: Apr 2008 Location: Greenfield MN Posts: 360	Re: Bucket seat floor support Hi, Will the seat brace work on my 72 K20 and can you give me a guesstimate on shipping to 55357 as I have a set of factory bucket seats I would like to install. Thanks Bud



Register or Log In To remove these advertisements.

10-14-2008, 01:10 PM	#19
budman k20 1972 K20 Join Date: Apr 2008 Location: Greenfield MN Posts: 360	Re: Bucket seat floor support I will take it even if it needs to be modified. Please send payment info. Bud

10-14-2008, 08:27 PM	#20
1972CST Registered User Join Date: Mar 2008 Location: Concord NC Posts: 511	Re: Bucket seat floor support Sold- pending payment

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.