Automatic crossmember - MN - The 1947 - Present Chevrolet & GMC Truck Message Board Network

brossow · 10-13-2008, 09:39 PM

Guess I'll join the fray and offer up my automatic crossmember for sale, too. This one came to me in great condition and was then media blasted and then primed with about $15 worth of Eastwood's silver Rust Encapsulator for extra protection prior to painting. Never got around to painting it before deciding to go another direction and now it's just gathering dust.

Looking for $60 + the ride from 56001. I've got more than that in it not including the two hours of labor in the blasting cabinet. It was done for my own use and not resale; if you've seen my build thread you know I don't cut corners. All it needs is your choice of paint and it's ready to bolt in.

Brent

bmrrwolfe · 10-23-2008, 09:52 AM

What would shipping be to 44145?
Thanks!

brossow · 10-24-2008, 09:02 AM

Quote:

Originally Posted by bmrrwolfe

What would shipping be to 44145?
Thanks!

Rough guess on weight with packaging, etc. looks like about $25. If it's more I'll eat the extra cost and if it's less I'll refund the difference.

Brent

souljaboy9768 · 10-25-2008, 03:49 PM

how much with shipping to victoria tx 77901. Needing one asap

brossow · 10-25-2008, 03:55 PM

Looks about the same. Same deal for anyone -- $85 shipped in the lower 48 and a refund of the difference if the shipping cost is more than a buck or two less than $25. (Hardly worth the postage and/or time for $1-2 less, I hope everyone would agree.)

Brent

souljaboy9768 · 10-26-2008, 10:33 PM

i can do 55 shipped any more than that I rather do the same as you and get one from ccp

brossow · 10-26-2008, 10:36 PM

Better call CPP. I can't possibly go that low for this nice a piece. I've got more than that in it without even considering the shipping. Sorry.

brossow · 11-03-2008, 01:32 AM

Ttt.

bestchevyfan · 11-03-2008, 06:11 AM

Hi, can you use this to mount a 700r4 tranmission ? Thanks,buddy

brossow · 11-03-2008, 09:52 AM

Don't know why you couldn't, though because I haven't done it personally I can't absolutely guarantee it. I was going to use it to mount my 4L60E, which is externally the same size as the 700R4.

**Hart_Rod** · 11-03-2008, 11:05 AM

Quote:

Originally Posted by bestchevyfan

Hi, can you use this to mount a 700r4 tranmission ? Thanks,buddy

You'll just have to move it back and redrill the holes.

R

10-13-2008, 09:39 PM	#1
brossow Amateur Rust Fighter Join Date: Sep 2007 Location: Mankato, MN Posts: 1,087	Automatic crossmember - MN Guess I'll join the fray and offer up my automatic crossmember for sale, too. This one came to me in great condition and was then media blasted and then primed with about $15 worth of Eastwood's silver Rust Encapsulator for extra protection prior to painting. Never got around to painting it before deciding to go another direction and now it's just gathering dust. Looking for $60 + the ride from 56001. I've got more than that in it not including the two hours of labor in the blasting cabinet. It was done for my own use and not resale; if you've seen my build thread you know I don't cut corners. All it needs is your choice of paint and it's ready to bolt in. Brent Attached Images __________________ Brent '72 Chevy SWB stepside - [ Build Thread ] '79 ChevMC SWB fleetside - [ Build Thread ] '64 Chevy SWB fleetside & '66 Chevy SWB stepside (waiting in the wings...) Last edited by brossow; 10-26-2008 at 10:40 PM.

10-23-2008, 09:52 AM	#2
bmrrwolfe 1970 C10 Join Date: Dec 2007 Location: Cleveland Ohio Posts: 212	Re: Automatic crossmember - MN What would shipping be to 44145? Thanks!

10-25-2008, 03:49 PM	#4
souljaboy9768 Registered User Join Date: Oct 2008 Location: Victoria, TX Posts: 92	Re: Automatic crossmember - MN how much with shipping to victoria tx 77901. Needing one asap

10-25-2008, 03:55 PM	#5
brossow Amateur Rust Fighter Join Date: Sep 2007 Location: Mankato, MN Posts: 1,087	Re: Automatic crossmember - MN Looks about the same. Same deal for anyone -- $85 shipped in the lower 48 and a refund of the difference if the shipping cost is more than a buck or two less than $25. (Hardly worth the postage and/or time for $1-2 less, I hope everyone would agree.) Brent __________________ Brent '72 Chevy SWB stepside - [ Build Thread ] '79 ChevMC SWB fleetside - [ Build Thread ] '64 Chevy SWB fleetside & '66 Chevy SWB stepside (waiting in the wings...)

10-26-2008, 10:33 PM	#6
souljaboy9768 Registered User Join Date: Oct 2008 Location: Victoria, TX Posts: 92	Re: Automatic crossmember - MN i can do 55 shipped any more than that I rather do the same as you and get one from ccp

10-26-2008, 10:36 PM	#7
brossow Amateur Rust Fighter Join Date: Sep 2007 Location: Mankato, MN Posts: 1,087	Re: Automatic crossmember - MN Better call CPP. I can't possibly go that low for this nice a piece. I've got more than that in it without even considering the shipping. Sorry. __________________ Brent '72 Chevy SWB stepside - [ Build Thread ] '79 ChevMC SWB fleetside - [ Build Thread ] '64 Chevy SWB fleetside & '66 Chevy SWB stepside (waiting in the wings...)

11-03-2008, 01:32 AM	#8
brossow Amateur Rust Fighter Join Date: Sep 2007 Location: Mankato, MN Posts: 1,087	Re: Automatic crossmember - MN Ttt. __________________ Brent '72 Chevy SWB stepside - [ Build Thread ] '79 ChevMC SWB fleetside - [ Build Thread ] '64 Chevy SWB fleetside & '66 Chevy SWB stepside (waiting in the wings...)

11-03-2008, 06:11 AM	#9
bestchevyfan Registered User Join Date: Jun 2002 Location: new market, alabama Posts: 1,330	Re: Automatic crossmember - MN Hi, can you use this to mount a 700r4 tranmission ? Thanks,buddy

11-03-2008, 09:52 AM	#10
brossow Amateur Rust Fighter Join Date: Sep 2007 Location: Mankato, MN Posts: 1,087	Re: Automatic crossmember - MN Don't know why you couldn't, though because I haven't done it personally I can't absolutely guarantee it. I was going to use it to mount my 4L60E, which is externally the same size as the 700R4. __________________ Brent '72 Chevy SWB stepside - [ Build Thread ] '79 ChevMC SWB fleetside - [ Build Thread ] '64 Chevy SWB fleetside & '66 Chevy SWB stepside (waiting in the wings...)

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.