![]() |
Register or Log In To remove these advertisements. |
|
|
![]() |
|
Thread Tools | Display Modes |
![]() |
#1 |
Watchin the rust grow
![]() Join Date: Oct 2008
Location: Western Nebraska
Posts: 950
|
Pain in the ass squeek.
I want to find out how to fix this squeek, it's not the brakes,
When I get on the gas with about 1000-2000 RPMs it squeeks terribly, the belts don't appear to be worn or frayed. But if I get the RPMs up above 2000 it doesn't squeek. It's a 79 K10 with a Np203 T-case, TH350 Tranny 350 4bbl Carb, if you need anything else just ask. |
![]() |
![]() |
![]() |
#2 |
Just here to tinker
![]() Join Date: Jun 2008
Location: Holland, MI
Posts: 3,692
|
Re: Pain in the ass squeek.
check belt tension by pushing the alternator pulley fan blades by hand with the engine STOPPED. The blades/pulley should not move without the belt moving.
Also check pulley alignment...
__________________
78 C10 SWB Diesel #1 (wrecked)http://67-72chevytrucks.com/vboard/s...1978+silverado 78 C10 SWB Diesel #2 (sold)http://67-72chevytrucks.com/vboard/s...d.php?t=650751 60 GMC Suburban (sold)http://67-72chevytrucks.com/vboard/s...d.php?t=445526 60 GMC 1000 (sold)http://67-72chevytrucks.com/vboard/s...d.php?t=298235 67 GMC 1500 (sold) http://67-72chevytrucks.com/vboard/s...d.php?t=803695 86 Suburban(summer unit) http://67-72chevytrucks.com/vboard/s...d.php?t=810697 88 Suburban 4x4(winter unit)https://67-72chevytrucks.com/vboard/...25#post8900725 |
![]() |
![]() |
![]() |
#3 |
I don't think these pills work
Join Date: Apr 2008
Location: burkburnett,Tx
Posts: 626
|
Re: Pain in the ass squeek.
mine did it cause the timing was off. only under acceleration once it shifted and the load was off the motor it quit sqeakin.
__________________
SQUARE84 ![]() 90 SUBURBAN |
![]() |
![]() |
![]() |
#4 |
Registered User
Join Date: Jan 2008
Location: Pensacola Fl
Posts: 270
|
Re: Pain in the ass squeek.
Spray a little water on the belts at those rpms and see if they quiet down....should pinpoint or elimnate one or more belts.
__________________
Gene ![]() |
![]() |
![]() |
![]() |
#5 |
78 Big10 454
![]() Join Date: Jul 2008
Location: Pismo Beach, CA
Posts: 838
|
Re: Pain in the ass squeek.
Benelli: Had the same exact problem and it turned out to be the A/C compressor belt. Hope this helps...
|
![]() |
![]() |
![]() |
#6 |
Account Suspended
Join Date: Dec 2007
Location: Unnapreciative, Trollville
Posts: 2,079
|
Re: Pain in the ass squeek.
quickest thing to quiet a belt down to check if it's squeaking is to put a little DAWN dish soap on it. It doesn't last too long but will let you know in a second if it's the belt or not
|
![]() |
![]() |
![]() |
#7 |
Robert Olson Transport
![]() Join Date: Oct 2002
Location: recent transplant to NC USA
Posts: 20,288
|
Re: Pain in the ass squeek.
before we narrow it down to a belt.. i need to ask does it do this only when the truck is in gear or in motion ? or does it do it in park too?
__________________
Bob 1951 International running on a squarebody chassis "If a man's worth is judged by the people he associates himself with, then i am the richest man in the world knowing some of the fine people of this board" http://67-72chevytrucks.com/vboard/a...t.php?f=25&a=9 (you can review the site rules here!) PM Me for your vehicle/parts hauling needs in the North East US or see my Facebook page Robert Olson Transport Live each day to the fullest.. you never know when fate is going to pull the rug out from under you... I hate cancer!! |
![]() |
![]() |
![]() |
#8 | ||||||
Watchin the rust grow
![]() Join Date: Oct 2008
Location: Western Nebraska
Posts: 950
|
Re: Pain in the ass squeek.
First off, Thankyou for all the replies.
I would like to add that it usually doesn't do it until 15 minutes or so into the drive, and it usually starts up after a tight corner, and it gets worse going through/out of a turn also. Quote:
Quote:
Quote:
Quote:
Quote:
Quote:
How could I go about checking pulley alignment, I'm sorry, I'm pretty new to all of this guys. Last edited by Benelli; 10-18-2008 at 12:15 AM. |
||||||
![]() |
![]() |
![]() |
#9 |
Just here to tinker
![]() Join Date: Jun 2008
Location: Holland, MI
Posts: 3,692
|
Re: Pain in the ass squeek.
If you can move the blade by hand, it needs to be tightened. There are two bolts. The upper is usually a 1/2 and the lower is usually a 9/16. You'll notice a hole in the upper alternator bracket, that is where you can stick something with a long handle in to hold the alternator while retightening the bolts...Not too tight though, that could cause premature wear on the bearings inside the alternator. Just tight enough that you can't move the blades by hand. Let us know if that fixes it...
__________________
78 C10 SWB Diesel #1 (wrecked)http://67-72chevytrucks.com/vboard/s...1978+silverado 78 C10 SWB Diesel #2 (sold)http://67-72chevytrucks.com/vboard/s...d.php?t=650751 60 GMC Suburban (sold)http://67-72chevytrucks.com/vboard/s...d.php?t=445526 60 GMC 1000 (sold)http://67-72chevytrucks.com/vboard/s...d.php?t=298235 67 GMC 1500 (sold) http://67-72chevytrucks.com/vboard/s...d.php?t=803695 86 Suburban(summer unit) http://67-72chevytrucks.com/vboard/s...d.php?t=810697 88 Suburban 4x4(winter unit)https://67-72chevytrucks.com/vboard/...25#post8900725 |
![]() |
![]() |
![]() |
#10 |
STILL PLAYS WITH TRUX
Join Date: Nov 2002
Location: Melbourne, Fla.
Posts: 2,764
|
![]()
It sounds to me like the PS pump may be your problem if this is happening only while you are turning the pump my need servicing with fliud or the belts could need adjusting or the pump could be going bad internally and placing extra friction on the belt if the pump pully isnt turning freely.
I dont know how your truck is set up but on mine the PS pump pully has 2 belts so one may be adj correctly and the other one may be lose and it would still squeek. |
![]() |
![]() |
![]() |
#11 |
Robert Olson Transport
![]() Join Date: Oct 2002
Location: recent transplant to NC USA
Posts: 20,288
|
Re: Pain in the ass squeek.
when you do the water or dawn trick try doing the ps belt first and see if it goes away i agree its prolly the ps belt id look to make sure there is proper level of fluid and there is no fluid on the belts too giving it a little slip when hot
__________________
Bob 1951 International running on a squarebody chassis "If a man's worth is judged by the people he associates himself with, then i am the richest man in the world knowing some of the fine people of this board" http://67-72chevytrucks.com/vboard/a...t.php?f=25&a=9 (you can review the site rules here!) PM Me for your vehicle/parts hauling needs in the North East US or see my Facebook page Robert Olson Transport Live each day to the fullest.. you never know when fate is going to pull the rug out from under you... I hate cancer!! Last edited by old Rusty C10; 10-18-2008 at 10:27 AM. |
![]() |
![]() |
![]() |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|