streching front fenders - The 1947 - Present Chevrolet & GMC Truck Message Board Network

mnky30 · 11-01-2008, 10:36 PM

has anyone posted any pics on how they streched the front fender to fill where tire is so when running smaller tires it does not look so bad. any help would be great

vin63 · 11-01-2008, 11:07 PM

Quote:

Originally Posted by mnky30

has anyone posted any pics on how they streched the front fender to fill where tire is so when running smaller tires it does not look so bad. any help would be great

I didn't stretch my front fenders, but I dropped the top lip 2 1/2 inches on mine to accomplish something similar in taking up the open space above the tire. Here's a before and after photo of what I did to my fenders awhile back. Let me know if this is what you are referring to:

mnky30 · 11-02-2008, 12:38 AM

yea kinda like that but i also want to strech the back and front areas. i like what you did with yours nice job. i want the front fender to look mor like the rears on the fleet side beds. i think they should have been switch front to back to much tire showing up front. if you know what i mean.

vin63 · 11-02-2008, 02:39 AM

Gotcha...I thought the rear fender opening on the Fleetside bed was not large enough for a tall tire and an extreme lowered stance (the control arm pulls the axle centerline forward). So, I stretched the rear wheel opening 3 1/2 inches forward to center a 31-inch tall tire at full drop - and to make it more proportional to the front fender.

Here's the photo right after I finished the rear wheel opening stretch that made me decide to drop the front fender lip.

Frizzle Fry · 11-02-2008, 05:35 AM

I didn't like that aspect of the arches either. Here's what I did:

TylerHuff · 11-02-2008, 09:12 AM

wow frizzlefry never seen that before. looks really good

killthewabbit · 11-02-2008, 10:12 AM

Wow!

kizer · 11-02-2008, 11:09 AM

To bad that project is on perm hold.

mnky30 · 11-02-2008, 01:20 PM

thanks for the pics vin63 and frizzle fry that is what i was looking for. vin63 i like what you did on the rear wheel wells they just look to small on a fleet side. hey frizzle what a great job on the hole truckwish i could work with metal that good, the front fender arch is what i was looking for it is to large of an opening. when are you going to start back up on that beast? thanks all for the pics and the help

Frizzle Fry · 11-03-2008, 01:28 AM

Quote:

Originally Posted by kizer

To bad that project is on perm hold.

Not perm, just extra-extra-long...

I'm too deep in the Tahoe to let meyseft get distracted at this point. Believe me it's taking all my self-restraint not to allow it to distract me...

**scotts62** · 11-03-2008, 07:48 AM

Man that looks good!

robert s · 11-05-2008, 12:23 PM

Looks good keep up the good work.

terrellautosports · 11-05-2008, 01:52 PM

Frizzle,

did you have to put any spacers on the front for those corvette wheels?

**slepysal** · 11-05-2008, 04:57 PM

SWEEEEEET !!! Man that looks good

vin63 · 11-20-2008, 12:33 PM

Quote:

Originally Posted by Frizzle Fry

I didn't like that aspect of the arches either. Here's what I did:

I like what you're doing to the front bumper...did you finish welding in the spacer? I'd like to see how that turned out and the proportions to the front of the truck.

**scotts62** · 11-20-2008, 01:49 PM

Is there any updates? Or still holding..?

Frizzle Fry · 11-20-2008, 02:54 PM

Hey guys,

I've been sick so I didn't see this thread pop back up...

The vette wheels will go away (not my style). They have no spacers in the pics. Those wheels are all backspace (no lip) which I hate. Luckily the front has room for some frontspacing (dish), but the rear may need the fenders widened a tad in order to run a nice dish. We'll see...

As far as the progress goes I actually just lined up a source for the roller channels I need for the one-piece glass. A site vendor is sending me a sample to see if it'll work. But the project won't be making any huge leaps forward any time soon since I'm about to do an engine swap on the sunbeam and I still need to finish the Tahoe....

Thanks for all the complements!

Frizzle Fry · 11-20-2008, 02:59 PM

Quote:

Originally Posted by vin63

I like what you're doing to the front bumper...did you finish welding in the spacer? I'd like to see how that turned out and the proportions to the front of the truck.

Haven't finished filling in the gap (only about 10% done). I have a section from another 60-66 bumper I'm using. The plan is to then narrow it and integrate with the front fenders. The increased height (lowered bottom) gives it a little more of a sporty look; a little like an air dam effect.

1Bad62Pro/Street · 11-24-2008, 12:16 PM

I really like this look! on the front and rear fenders! Fender Flares!

Has anyone ever extended the rear fenders on a stepside before! I have seen it once at the local dragstrip. It was for the oversized drag tires, but it looked really good! If anyone has done this....post a pic!

Frizzle Fry · 11-24-2008, 12:28 PM

you mean widen or lengthen?

1Bad62Pro/Street · 11-24-2008, 01:03 PM

Widening it to have room for the Large Drag Tires! Think the guy just took two fenders and extended it so he would have room for the wide meats! It was an Pro/Mod Class!

Tomsriv · 11-25-2008, 01:02 AM

Thats Boss! Changes the whole look of the truck!

Frizzle Fry · 11-25-2008, 02:58 AM

I've seen them sold that way; 3" wider. They even sold steps that were made to fit the wider fenders. Can't remember where I saw them. I'm sure someone will come through with a link.

**scotts62** · 11-25-2008, 08:15 AM

Found this one.

3'' wider w/step

1Bad62Pro/Street · 11-25-2008, 09:15 AM

Yep......
Thanks Bud!
Found an ole' truck that has this done!!!!!!
Man, I would love to imitate this look on my 62 Truck! Think we all would!!
But, I would want it where I could drive it on the road!!!! Ha ha

http://www.sporttruck.com/featuredve...fications.html

11-01-2008, 10:36 PM	#1
mnky30 Registered User Join Date: Apr 2007 Location: santa rosa california Posts: 226	streching front fenders has anyone posted any pics on how they streched the front fender to fill where tire is so when running smaller tires it does not look so bad. any help would be great Attached Images __________________ vinnie 1960 chevy c10 frame with a 1966 cab 2002 dodge intrepid r/t 2004 chevy 2500 4 door short bed

11-02-2008, 12:38 AM	#3
mnky30 Registered User Join Date: Apr 2007 Location: santa rosa california Posts: 226	Re: streching front fenders yea kinda like that but i also want to strech the back and front areas. i like what you did with yours nice job. i want the front fender to look mor like the rears on the fleet side beds. i think they should have been switch front to back to much tire showing up front. if you know what i mean. __________________ vinnie 1960 chevy c10 frame with a 1966 cab 2002 dodge intrepid r/t 2004 chevy 2500 4 door short bed

11-02-2008, 02:39 AM	#4
vin63 It's Better With Nitro Join Date: Apr 2008 Location: Chino Hills, CA Posts: 2,262	Re: streching front fenders Gotcha...I thought the rear fender opening on the Fleetside bed was not large enough for a tall tire and an extreme lowered stance (the control arm pulls the axle centerline forward). So, I stretched the rear wheel opening 3 1/2 inches forward to center a 31-inch tall tire at full drop - and to make it more proportional to the front fender. Here's the photo right after I finished the rear wheel opening stretch that made me decide to drop the front fender lip. __________________ 1963 C-10: Deluxe-optioned cab, shortbed, fleetside Pontiac 462 ci, Kauffman D-Port alum. heads 4L80E, narrowed sheetmetal Ford 9-inch Tubular front and rear suspension Custom 6-piston front disc and 4-piston rear disc brakes Last edited by vin63; 11-02-2008 at 03:52 AM.

11-02-2008, 05:35 AM	#5
Frizzle Fry Registered User Join Date: Aug 2005 Location: Hillsboro Oregon Posts: 6,449	Re: streching front fenders I didn't like that aspect of the arches either. Here's what I did:

11-02-2008, 09:12 AM	#6
TylerHuff Registered User Join Date: Sep 2008 Location: Blue Springs, MO Posts: 168	Re: streching front fenders wow frizzlefry never seen that before. looks really good __________________ 1987 Gmc sierra 1962 Apache 10 Last edited by TylerHuff; 11-05-2008 at 11:55 PM.

11-02-2008, 10:12 AM	#7
killthewabbit Spear and magic helmet! Join Date: Oct 2006 Location: Nashville, TN Posts: 1,226	Re: streching front fenders Wow! __________________ -- Will

11-02-2008, 11:09 AM	#8
kizer Its Deja Vu time again Join Date: Aug 2008 Location: Marysville, North of Seattle WA Posts: 815	Re: streching front fenders To bad that project is on perm hold. __________________ Its not pretty but its mine to figure out. The build / The Photos / Build Diary

11-02-2008, 01:20 PM	#9
mnky30 Registered User Join Date: Apr 2007 Location: santa rosa california Posts: 226	Re: streching front fenders thanks for the pics vin63 and frizzle fry that is what i was looking for. vin63 i like what you did on the rear wheel wells they just look to small on a fleet side. hey frizzle what a great job on the hole truckwish i could work with metal that good, the front fender arch is what i was looking for it is to large of an opening. when are you going to start back up on that beast? thanks all for the pics and the help __________________ vinnie 1960 chevy c10 frame with a 1966 cab 2002 dodge intrepid r/t 2004 chevy 2500 4 door short bed

11-03-2008, 07:48 AM	#11
scotts62 One day... Join Date: Apr 2008 Location: Tuttle, Ok Posts: 9,243	Re: streching front fenders Man that looks good! __________________ Scott 93 crew cab build Project 62

11-05-2008, 12:23 PM	#12
robert s Registered User Join Date: Oct 2008 Location: santa rosa ca Posts: 3	Re: streching front fenders Looks good keep up the good work.

11-05-2008, 01:52 PM	#13
terrellautosports New Member Join Date: Feb 2007 Location: s.w. missouri Posts: 176	Re: streching front fenders Frizzle, did you have to put any spacers on the front for those corvette wheels? __________________ 1968 SWB Project. Soon to Start Build Thread

11-05-2008, 04:57 PM	#14
slepysal Registered User Join Date: Oct 2006 Location: San Jose NOR*CAL Posts: 3,080	Re: streching front fenders SWEEEEEET !!! Man that looks good __________________ 1960 Apache long bed fleet L6 250 Clifford intake 2 bbl carb. Langdon cast headers with dual exhaust and bellflower tips. T-5 5 speed, power steering and power disc brakes. "Over, Around or through it... "

11-20-2008, 01:49 PM	#16
scotts62 One day... Join Date: Apr 2008 Location: Tuttle, Ok Posts: 9,243	Re: streching front fenders Is there any updates? Or still holding..? __________________ Scott 93 crew cab build Project 62

11-20-2008, 02:54 PM	#17
Frizzle Fry Registered User Join Date: Aug 2005 Location: Hillsboro Oregon Posts: 6,449	Re: streching front fenders Hey guys, I've been sick so I didn't see this thread pop back up... The vette wheels will go away (not my style). They have no spacers in the pics. Those wheels are all backspace (no lip) which I hate. Luckily the front has room for some frontspacing (dish), but the rear may need the fenders widened a tad in order to run a nice dish. We'll see... As far as the progress goes I actually just lined up a source for the roller channels I need for the one-piece glass. A site vendor is sending me a sample to see if it'll work. But the project won't be making any huge leaps forward any time soon since I'm about to do an engine swap on the sunbeam and I still need to finish the Tahoe.... Thanks for all the complements!

11-24-2008, 12:16 PM	#19
1Bad62Pro/Street "Where were you in '62?" Join Date: Jul 2004 Location: Cleveland County, North Cackalacky Posts: 5,013	Re: streching front fenders I really like this look! on the front and rear fenders! Fender Flares! Has anyone ever extended the rear fenders on a stepside before! I have seen it once at the local dragstrip. It was for the oversized drag tires, but it looked really good! If anyone has done this....post a pic! __________________ PROJECT: "FULL METAL YELLOW JACKET" 1962 Chevy C-10 Stepside Shortbed Nostalgia Pro/Street Pickup Truck PROJECT: "FULL METAL YELLOW JACKET Build Thread What Are You Workin' On? - 1Bad62ChevyPickup PROJECT: "TYRANNORAMBLER REX" 1969 AMC Rambler American Nostalgia Pro/Street Youtube Channel: Father Son Projects Youtube Channel: 2TIMOTHY2FITHTEEN "North and South Carolina Folks Click Here!" (((( ~ I have Parts For Sale & Miscellaneous Stuff ~ )))) "Well being as there's no other place around the place, I reckon this must be the place, I reckon...Nyuk Nyuk Nyuk" -Curly Howard Ph.D.



Register or Log In To remove these advertisements.

11-24-2008, 12:28 PM	#20
Frizzle Fry Registered User Join Date: Aug 2005 Location: Hillsboro Oregon Posts: 6,449	Re: streching front fenders you mean widen or lengthen?

11-24-2008, 01:03 PM	#21
1Bad62Pro/Street "Where were you in '62?" Join Date: Jul 2004 Location: Cleveland County, North Cackalacky Posts: 5,013	Re: streching front fenders Widening it to have room for the Large Drag Tires! Think the guy just took two fenders and extended it so he would have room for the wide meats! It was an Pro/Mod Class! __________________ PROJECT: "FULL METAL YELLOW JACKET" 1962 Chevy C-10 Stepside Shortbed Nostalgia Pro/Street Pickup Truck PROJECT: "FULL METAL YELLOW JACKET Build Thread What Are You Workin' On? - 1Bad62ChevyPickup PROJECT: "TYRANNORAMBLER REX" 1969 AMC Rambler American Nostalgia Pro/Street Youtube Channel: Father Son Projects Youtube Channel: 2TIMOTHY2FITHTEEN "North and South Carolina Folks Click Here!" (((( ~ I have Parts For Sale & Miscellaneous Stuff ~ )))) "Well being as there's no other place around the place, I reckon this must be the place, I reckon...Nyuk Nyuk Nyuk" -Curly Howard Ph.D.

11-25-2008, 01:02 AM	#22
Tomsriv Registered User Join Date: Apr 2007 Location: Camarillo, CA Posts: 257	Re: streching front fenders Thats Boss! Changes the whole look of the truck! __________________ '65 Chevy shortbed stepside.

11-25-2008, 02:58 AM	#23
Frizzle Fry Registered User Join Date: Aug 2005 Location: Hillsboro Oregon Posts: 6,449	Re: streching front fenders I've seen them sold that way; 3" wider. They even sold steps that were made to fit the wider fenders. Can't remember where I saw them. I'm sure someone will come through with a link.

11-25-2008, 08:15 AM	#24
scotts62 One day... Join Date: Apr 2008 Location: Tuttle, Ok Posts: 9,243	Re: streching front fenders Found this one. 3'' wider w/step __________________ Scott 93 crew cab build Project 62 Last edited by scotts62; 11-25-2008 at 08:16 AM.

11-25-2008, 09:15 AM	#25
1Bad62Pro/Street "Where were you in '62?" Join Date: Jul 2004 Location: Cleveland County, North Cackalacky Posts: 5,013	Re: streching front fenders Yep...... Thanks Bud! Found an ole' truck that has this done!!!!!! Man, I would love to imitate this look on my 62 Truck! Think we all would!! But, I would want it where I could drive it on the road!!!! Ha ha http://www.sporttruck.com/featuredve...fications.html __________________ PROJECT: "FULL METAL YELLOW JACKET" 1962 Chevy C-10 Stepside Shortbed Nostalgia Pro/Street Pickup Truck PROJECT: "FULL METAL YELLOW JACKET Build Thread What Are You Workin' On? - 1Bad62ChevyPickup PROJECT: "TYRANNORAMBLER REX" 1969 AMC Rambler American Nostalgia Pro/Street Youtube Channel: Father Son Projects Youtube Channel: 2TIMOTHY2FITHTEEN "North and South Carolina Folks Click Here!" (((( ~ I have Parts For Sale & Miscellaneous Stuff ~ )))) "Well being as there's no other place around the place, I reckon this must be the place, I reckon...Nyuk Nyuk Nyuk" -Curly Howard Ph.D. Last edited by 1Bad62Pro/Street; 11-25-2008 at 09:16 AM. Reason: Cuz I can!!

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.