![]() |
![]() |
#1 |
Registered User
Join Date: Oct 2008
Location: bath PA
Posts: 22
|
Yes, I am that dude.
I know you guys probably hate this, but I NEED to put a newer stepside on my truck. Why? I already have one from a wreck (95 step) and my 67's original stepside looks like a big corn flake of RUST. There is nothing left of it, in fact the fenders came seperate than the truck because they rotted off. Plus, the ones Ive seen actually look good, IMHO.
So, who has done the newer bed conversion, and how straight-forward is it? Thanks! |
![]() |
![]() |
![]() |
#2 |
Junior Member
Join Date: Dec 2006
Location: Southeast Missouri
Posts: 2,436
|
Re: Yes, I am that dude.
My son and I found it very straight forward when we put a '96 step-side bed on my '67. It took some square tubing for spacers and some time to align it and bolt it on.
The '96 step-side is temporary for now until next year when we will put the 68 step-side bed on it I bought not too long ago. I am gathering the parts for the frame-off restoration we hope to start next year. This year I am in the midst of remodeling a room in our house and adding on another room so my '67 will have to wait until next spring I am afraid. It is not pretty, but here is what it looks like now. Danny
__________________
'67 Chevy C-20 short stepper - build complete, 454/SM-465. '75 C-30 Single Cab DRW-350 small block/NP-435. '77 GMC-6500 Dump Truck, 427 Tall Deck. '92 GMC K-3500 Duallie, 454/4L80E. |
![]() |
![]() |
![]() |
#3 |
Active Member
![]() Join Date: Jul 2007
Location: Centrally located between Houston, Austin and Waco. BCS area.
Posts: 7,947
|
Re: Yes, I am that dude.
Personally, I like the looks. Seems to flow real well with our old trucks.
I'm of the type to try to keep them as stock looking as possible, but only if you can. I wouldn't hesitate to improvise if it allowed me to drive and use the truck. |
![]() |
![]() |
![]() |
#4 |
Out of the carpool lane.
Join Date: Jan 2000
Location: Clark Co, WA
Posts: 5,673
|
Re: Yes, I am that dude.
Just be sure to make the rear wheel opening round, just like the front.
__________________
1968 C-10 SWB, 5.7 Vortec/700R4/3.73 posi, Torch Red 1968 Camaro, 250/Powerglide, all original (No, I'm not gonna drop a 350 in it!...Jeez!) 2000 Honda VFR in the faster yellow! 2008 Husqvarna TE-610 1967 C-10 SWB 'Six Appeal'-Gone but not forgotten... |
![]() |
![]() |
![]() |
#5 | |
20' Daredevil (Ret)
![]() Join Date: May 2003
Location: Jefferson State
Posts: 13,643
|
Re: Yes, I am that dude.
Quote:
![]()
__________________
- Mike - 1972 K20 LWB 350/350/205 RIP El Jay |
|
![]() |
![]() |
![]() |
#6 |
Registered User
Join Date: Oct 2007
Location: Mont Belvieu, Texas
Posts: 729
|
Re: Yes, I am that dude.
Here is a board member's truck. I'm not a fan of the new beds but his looks really good. I was considering it for a while on my 67 when I was having so much trouble finding a good bed. So... I would say, if you can get it lined up like this one, go for it. This truck looks sweet!
|
![]() |
![]() |
![]() |
#7 |
Old Skool Club
![]() Join Date: Jun 2001
Location: Benton, AR "The Heart of Arkansas"
Posts: 10,880
|
Re: Yes, I am that dude.
Here's a pic of Joel McPherson's truck....with the wheel openings all from an '88-98. The bed isn't from that era, but the openings are. Check it out.
__________________
Member Nr. 2770 '96 GMC Sportside; 4.3/SLT - Daily driven....constantly needs washed. '69 C-10 SWB; 350/TH400 - in limbo The older I get, the better I was. |
![]() |
![]() |
![]() |
#8 |
Registered User
Join Date: Jan 2008
Location: Atlanta,Ga
Posts: 660
|
![]()
Thats real slick!
__________________
www.gkautospa.com Like A Rock! http://67-72chevytrucks.com/vboard/s...d.php?t=397153 |
![]() |
![]() |
![]() |
#9 |
Registered User
![]() Join Date: Nov 2004
Location: Southern Nevada
Posts: 532
|
Re: Yes, I am that dude.
1 minute fix (not exactly round) but gives you the idea.
![]()
__________________
1972 K-10 SWB Cheyenne |
![]() |
![]() |
![]() |
#10 |
Special Order
![]() ![]() Join Date: Nov 2004
Location: Mt Airy, MD
Posts: 85,859
|
Re: Yes, I am that dude.
WELCOME to the site!!!
I don`t mind these beds in a pinch.They have their place in keeping these oldies goin`.I wouldn`t put one on for looks.I like how the General done it the first time. ![]()
__________________
"BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~ |
![]() |
![]() |
![]() |
#11 |
I have a radical idea!
Join Date: Jan 2005
Location: Sweet Home Alabama!
Posts: 6,513
|
Re: Yes, I am that dude.
I'm sorry, but that looks absolutely terrible IMO!!!
__________________
'67 C-30 Dually Pickup 6.2 Turbo Diesel, NP435 ‘72 C-10 SWB , 350 4bbl, TH350 '69 C-10 SWB , 250 L6, 3 OTT '69 GMC C3500, dump truck, 351 V6, NP435 '84 M1009 CUCV Military Blazer 67 C-30 Turbodiesel build thread http://67-72chevytrucks.com/vboard/s...d.php?t=254096 My trucks http://s226.photobucket.com/albums/d...ediafilter=all Member of the 1-Ton Club! |
![]() |
![]() |
![]() |
#12 |
Registered User
Join Date: Jun 2007
Location: Boca Raton, FL
Posts: 476
|
Re: Yes, I am that dude.
Usually not a fan either, but that orange one sure does look sharp to me!
|
![]() |
![]() |
![]() |
#13 |
Registered User
![]() Join Date: Aug 2005
Location: Hillsboro Oregon
Posts: 6,449
|
Re: Yes, I am that dude.
|
![]() |
![]() |
![]() |
#14 |
Registered User
![]() Join Date: Aug 2005
Location: Hillsboro Oregon
Posts: 6,449
|
Re: Yes, I am that dude.
I have to say that Mike Nutt pulled it off better than any other I've seen. He shortened the rear overhang and eliminated the rear steps.
![]() |
![]() |
![]() |
![]() |
#15 |
Old Skool Club
![]() Join Date: Jun 2001
Location: Benton, AR "The Heart of Arkansas"
Posts: 10,880
|
Re: Yes, I am that dude.
When I posted the McPherson truck, my reason was to show matching wheel openings. We have grown up with the rounded style on these trucks, and aesthetics in design begs for the openings to be the same on the front and the back. Whichever one you like, is your decision.
If you have never seen the yellow truck of Joel McPherson, it was featured in two consecutive issues of one of the truck mags several years ago. The attention to detail, at that time, was way over the top. Then, after it was finished (in SF), he drove it to Florida. As for your truck, you do what you like. I like that the body lines on those 88-98 stepside beds line up with the lines on the '67-72. As for me, my early truck is a fleetside, and my '88-98 is a stepside. So, I feel akin to both.
__________________
Member Nr. 2770 '96 GMC Sportside; 4.3/SLT - Daily driven....constantly needs washed. '69 C-10 SWB; 350/TH400 - in limbo The older I get, the better I was. |
![]() |
![]() |
![]() |
#16 |
My Carbon Footprint
Join Date: Oct 2008
Location: Orygun
Posts: 5,527
|
Re: Yes, I am that dude.
Just remember guys.....he didn't ask what you thought....he asked how straight forward was it and what does he need to do.
|
![]() |
![]() |
![]() |
#17 |
Registered User
![]() Join Date: Aug 2005
Location: Hillsboro Oregon
Posts: 6,449
|
Re: Yes, I am that dude.
|
![]() |
![]() |
![]() |
#18 |
PROJECT 7DEUCE
![]() Join Date: Dec 2002
Location: GRANTS PASS OR
Posts: 21,608
|
Re: Yes, I am that dude.
I say do it lotik did it and it looks really good. He is on here from time to time may want to try p.m.ing him and see if he has any info to help ya out .
__________________
GO BIG GREEN ![]() MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P.. |
![]() |
![]() |
![]() |
#19 |
One day...
Join Date: Apr 2008
Location: Tuttle, Ok
Posts: 9,240
|
Re: Yes, I am that dude.
Ya ill have to agree they do look good on those body styles
![]() |
![]() |
![]() |
![]() |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|