Can anyone help me?

[1971c20]

So just recently my truck is makeing the awful noise coming from what sounds like the carrier bareing, or the rear end. it only makes the noise fro 0-35 and when im taking a right hand turn. the noise sounds like if you took a piece of sheet metal and bend it back and forth with your hands, its that bang type noise. also when i put it in reverse it goes ping and sounds like something is scrapeing whie i back up??? Please help this is my daily driver and i have no idea what it could be. Thanks for any advice.

[joe b]

I think you need to get under it and check the u joints and the carrier bearing

[1971c20]

Originally Posted by joe b

I think you need to get under it and check the u joints and the carrier bearing

Ya that is what i was thinking, but i did not think that it would make that kind of noise but i will do that.

[Willys47]

I have heard the ping when the ujoints are starting to go bad and if you leave it you could fine that the driveshaft could leave you.

[Longhorn Man]

If you don't know what you are looking for, you can pull the shafts out and run them to a drive shaft shop. They can install the parts correctly, install the carrier bearing correctly (don't beat on the shaft with a hammer, it spins just as fast as your crankshaft, and you wouldn't DREAM of doing that) Plus, they'll spin it and ballance it if needed.