What year S-10 for door weatherstripping and seat belts? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

glock35ipsc · 11-12-2008, 12:46 PM

For the life of me I can't find my notes on what year of S-10's o get the weatherstripping from to fit our trucks, or for the 3-point seat belts. Anyone?

**leddzepp** · 11-12-2008, 01:53 PM

I think the weatherstripping is from S-10's concluding in 93...

glock35ipsc · 11-12-2008, 02:06 PM

Beautimus, thanks!

67ChevyRedneck · 11-12-2008, 02:11 PM

1st gen square body. I think it's 82-93. It worked OK for me, but I feel that my doors shut too hard still. This was with used weather stripping too that's been on the truck over 2 years now. I can't adjust my doors out anymore, the body lines wouldn't match up.

**leddzepp** · 11-12-2008, 02:37 PM

I have heard the S-10 weatherstripping is a bit too tight as well. Check with Wes from Classicheartbeat. He sells and recommends the Dodge Dakota weatherstripping. Same as the S-10 stuff, but a little less tight and lets the door shut easier

glock35ipsc · 11-12-2008, 03:02 PM

Dakota, OK. Thanks!

jorgensensc · 11-12-2008, 06:50 PM

I can't remember the s-10 seatbelts either and I really want to get a set. I know it's not off the extended cabs, I think just the regular cabs.
Shawn

powell72 · 11-12-2008, 08:50 PM

I agree on passing on the S-10 stuff Bob, come over and try my doors, I have them.

70c10 · 11-12-2008, 09:57 PM

What year Dakotas?

57sailplane · 11-12-2008, 10:25 PM

whats the reason for not going original..

glock35ipsc · 11-12-2008, 10:30 PM

Quote:

Originally Posted by 57sailplane

whats the reason for not going original..

The S-10 and Dakotas use pinch molding to attach the seal to the body, instead of using weatherstrip adhesive.

Chris I will do that. I still need to go for that "test ride" too.

LuckyHenriksen · 11-13-2008, 12:55 AM

You can use seat belts out of an S10? Sweet what year? Does it attach to the stock location in our old trucks?

68 longbed · 11-13-2008, 12:57 PM

bumb

Brad · 11-13-2008, 02:45 PM

Quote:

Originally Posted by LuckyHenriksen

You can use seat belts out of an S10? Sweet what year? Does it attach to the stock location in our old trucks?

I did a writeup somewhere in the FAQ's.

Anyone got a pic of this Dakota weatherstripping?

sixty8c10 · 11-13-2008, 10:17 PM

i wanna know about the dakota weatherstripping too!

LuckyHenriksen · 11-13-2008, 10:21 PM

Sweet brad Ill look for it

I went and looked and only found your guide to modifying the belts to fit "nutrition friendly" people

Is there another one that I am not finding?

**mr48chev** · 11-14-2008, 01:25 AM

I just bought weatherstirp from Wes. I am not sure of what it was intended for as it is what he has listed for my 71 online. looks good though. I had to get a new windshield rubber and decided to get the door rubber at the same time.

hotrod 80 · 11-14-2008, 08:11 AM

How did it fit . I have the full size 88-98 rubber and it is to tight .

LuckyHenriksen · 11-14-2008, 11:43 AM

Anybody know about the seatbelts?

glock35ipsc · 11-14-2008, 11:52 AM

I sent Wes an email asking about the Dakota weatherstriping. I'll keep looking for the S-10 seat belt option.

Brad · 11-14-2008, 02:42 PM

Quote:

Originally Posted by LuckyHenriksen

Sweet brad Ill look for it
I went and looked and only found your guide to modifying the belts to fit "nutrition friendly" people

Is there another one that I am not finding?

No, that's it. I had them installed in my '67 but took them out when I put the 'in cab tank' back in. I was going to put them in the '68 but got a killer deal off the parts board just recently so mine are just sitting out for now.
Basically, they just bolt in the same place as the originals including the B pillar. It's a no brainer, but hard to make the ds work with tank in cab as shown below. Here's a pic of a buddies belts up top. Mine are the lower profile style below and I think they look better. From my observations it seems that the best ones come in Oldsmobile Bravadas, but I'm not sure the exact year- right around the mid 90's.

LuckyHenriksen · 11-14-2008, 02:45 PM

Ok thanks Brad. Ill be cruising the local CL to see if I can find any. Do they just not fit between the gas tank and door?

Brad · 11-14-2008, 02:49 PM

You won't find them at all on CL. You need to go to the U-pull by your house. But on used belts, always take into consideration the condition of the vehicle and any major damage to it. You probably don't want belts that were in a major fender-bender. Otherwise if it just appears the vehicle is relatively fine, then you'll be ok.

As you can see in the pic, a special adaptor plate was needed to offset the base from the tank. Even when they were in like you see, the belt didn't want to retract all the way and was kind of annoying. If you don't have the tank inside, then you can just literally bolt them in all the original holes and they work great!

LuckyHenriksen · 11-14-2008, 02:51 PM

Ok sweet I love a good junkyard scrounge. So look for mid 90's beater cars? Not S10's?

Brad · 11-14-2008, 02:55 PM

While any belt may work, we're talking about S-10 belts here. I'll go back and edit a bit more.

11-12-2008, 12:46 PM	#1
glock35ipsc Next project: 1970 K10 Join Date: Feb 2004 Location: Fort Collins, Colo 80524 Posts: 6,684	What year S-10 for door weatherstripping and seat belts? For the life of me I can't find my notes on what year of S-10's o get the weatherstripping from to fit our trucks, or for the 3-point seat belts. Anyone? __________________ *Bob* 1970 Chevy K10 LWB "Goldie" 350/TH350 *next project!!* 1981 Chevy C10 LWB 355/TH350 - My son's truck LS SWAP FORUM! Tons of LS swap info here! PLEASE CLICK HERE TO SUPPORT THE GREATEST BOARD ON THE NET! CLICK HERE FOR THE FAQ INDEX by KRUE

11-12-2008, 01:53 PM	#2
leddzepp Moderator Join Date: May 2007 Location: Southern Cal Posts: 20,037	Re: What year S-10 for door weatherstripping and seat belts? I think the weatherstripping is from S-10's concluding in 93...

11-12-2008, 02:06 PM	#3
glock35ipsc Next project: 1970 K10 Join Date: Feb 2004 Location: Fort Collins, Colo 80524 Posts: 6,684	Re: What year S-10 for door weatherstripping and seat belts? Beautimus, thanks! __________________ *Bob* 1970 Chevy K10 LWB "Goldie" 350/TH350 *next project!!* 1981 Chevy C10 LWB 355/TH350 - My son's truck LS SWAP FORUM! Tons of LS swap info here! PLEASE CLICK HERE TO SUPPORT THE GREATEST BOARD ON THE NET! CLICK HERE FOR THE FAQ INDEX by KRUE

11-12-2008, 02:11 PM	#4
67ChevyRedneck Hittin E-Z Street on Mud Tires Join Date: Nov 2004 Location: Greenville, SC Posts: 23,090	Re: What year S-10 for door weatherstripping and seat belts? 1st gen square body. I think it's 82-93. It worked OK for me, but I feel that my doors shut too hard still. This was with used weather stripping too that's been on the truck over 2 years now. I can't adjust my doors out anymore, the body lines wouldn't match up. __________________ Jesse James 1967 C10 SWB Stepside: 350/700R4/3.73 1965 Ford Mustang: 289/T5-5spd/3.25 Trac-Loc 1968 Pontiac Firebird: Project Fire Chicken! 2015 Silverado Double Cab 5.3L Z71 2001 Jeep Wrangler Sport 4.0L 5spd 2020 Chevrolet Equinox Premium 2.0L Turbo 2011 Mustang V6 ~ Wife's ride American Born, Country by the Grace of God 1967 CST Shop Truck Rebuild! My 1967 C-10 Build Thread My Vintage Air A/C Install Project "On a Dime" Trying my hand at Home Renovation! 1965 Mustang Modifications! Last edited by 67ChevyRedneck; 11-12-2008 at 02:12 PM.

11-12-2008, 02:37 PM	#5
leddzepp Moderator Join Date: May 2007 Location: Southern Cal Posts: 20,037	Re: What year S-10 for door weatherstripping and seat belts? I have heard the S-10 weatherstripping is a bit too tight as well. Check with Wes from Classicheartbeat. He sells and recommends the Dodge Dakota weatherstripping. Same as the S-10 stuff, but a little less tight and lets the door shut easier Last edited by leddzepp; 11-12-2008 at 02:37 PM.

11-12-2008, 03:02 PM	#6
glock35ipsc Next project: 1970 K10 Join Date: Feb 2004 Location: Fort Collins, Colo 80524 Posts: 6,684	Re: What year S-10 for door weatherstripping and seat belts? Dakota, OK. Thanks! __________________ *Bob* 1970 Chevy K10 LWB "Goldie" 350/TH350 *next project!!* 1981 Chevy C10 LWB 355/TH350 - My son's truck LS SWAP FORUM! Tons of LS swap info here! PLEASE CLICK HERE TO SUPPORT THE GREATEST BOARD ON THE NET! CLICK HERE FOR THE FAQ INDEX by KRUE

11-12-2008, 06:50 PM	#7
jorgensensc Registered User Join Date: Jul 2003 Location: Cypress, Tx Posts: 4,005	Re: What year S-10 for door weatherstripping and seat belts? I can't remember the s-10 seatbelts either and I really want to get a set. I know it's not off the extended cabs, I think just the regular cabs. Shawn __________________ 1972 C20 Suburban- Big Blue Betty '56 Chevy Bel Air Sedan- Frame up Restoration -What would you attempt to achieve if you knew you could not fail?- -I Refuse To Tiptoe Through Life, Only To Arrive Safely At Death's Door- R.I.P. EAST SIDE LOW LIFE

11-12-2008, 08:50 PM	#8
powell72 Senior Member Join Date: Jan 2005 Location: Loveland Co. Posts: 3,098	Re: What year S-10 for door weatherstripping and seat belts? I agree on passing on the S-10 stuff Bob, come over and try my doors, I have them. __________________ Chris 74 Custom Deluxe SWB 350/350/3.73’s 99 2wd Silverado RCSB 5.3/4L60/3.90’s http://www.classictrucks.com/feature...short_bed.html

11-12-2008, 09:57 PM	#9
70c10 67-72 Addict! Join Date: Feb 2002 Location: The TAX State! Posts: 7,856	Re: What year S-10 for door weatherstripping and seat belts? What year Dakotas? __________________ Jim 1970 C/10 Fleetside w/Ghost Flames Lowered 4.5" front and 4" rear (Raked) 355/350 Turbo w/shift kit 10" Redneck Performance Verter w/2500 stall Hooker Super Comps part#2808-1 Performer RPM Air-Gap 12 Bolt w/3:73 gears- Eaton Posi Comp Cams XE262 with 1.6 Crane Energizers, Road Demon 625 and Brodix IK 180 heads

11-12-2008, 10:25 PM	#10
57sailplane Senior Member Join Date: Mar 2004 Location: Nebraska Posts: 583	Re: What year S-10 for door weatherstripping and seat belts? whats the reason for not going original.. __________________ my build http://67-72chevytrucks.com/vboard/s...d.php?t=210902

11-13-2008, 12:55 AM	#12
LuckyHenriksen Registered User Join Date: Oct 2007 Location: Sherwood Oregon Posts: 1,908	Re: What year S-10 for door weatherstripping and seat belts? You can use seat belts out of an S10? Sweet what year? Does it attach to the stock location in our old trucks? __________________ 1968 Yenko Chevy LWB 6.0L/TH400 3/4 Drop Senior Project Build Thread Here

11-13-2008, 12:57 PM	#13
68 longbed Registered User Join Date: Jan 2007 Location: Elberta,Ala Posts: 77	Re: What year S-10 for door weatherstripping and seat belts? bumb

11-13-2008, 10:17 PM	#15
sixty8c10 MY EX DRIVES A BROOM Join Date: Nov 2003 Location: Herington, KS Posts: 869	Re: What year S-10 for door weatherstripping and seat belts? i wanna know about the dakota weatherstripping too! __________________ They say nobody's perfect. I'm a nobody, so I must be perfect. Building Nemo -1968 C10 Long Bed FRED -1947 KB-2 International

11-13-2008, 10:21 PM	#16
LuckyHenriksen Registered User Join Date: Oct 2007 Location: Sherwood Oregon Posts: 1,908	Re: What year S-10 for door weatherstripping and seat belts? Sweet brad Ill look for it I went and looked and only found your guide to modifying the belts to fit "nutrition friendly" people Is there another one that I am not finding? __________________ 1968 Yenko Chevy LWB 6.0L/TH400 3/4 Drop Senior Project Build Thread Here Last edited by LuckyHenriksen; 11-13-2008 at 10:45 PM.

11-14-2008, 01:25 AM	#17
mr48chev Registered User Join Date: Jul 2007 Location: Toppenish, WA Posts: 15,721	Re: What year S-10 for door weatherstripping and seat belts? I just bought weatherstirp from Wes. I am not sure of what it was intended for as it is what he has listed for my 71 online. looks good though. I had to get a new windshield rubber and decided to get the door rubber at the same time.



Register or Log In To remove these advertisements.

11-14-2008, 08:11 AM	#18
hotrod 80 mini truck racer Join Date: Aug 2006 Location: Baytown , texas Posts: 3,010	Re: What year S-10 for door weatherstripping and seat belts? How did it fit . I have the full size 88-98 rubber and it is to tight . __________________ 1949 5-window 1969 Camaro 1976 Chevy Luv yellow 1978 Chevy Luv Blue 1976 Chevy Luv Black 1979 Firebird Flooded in Harvey 1999 F350 Dually 2005 GMC Sierra 4.8 RCSB 2014 Explorer (wifes) My build :http://67-72chevytrucks.com/vboard/s...d.php?t=399148 Build #2: http://67-72chevytrucks.com/vboard/s...d.php?t=653583

11-14-2008, 11:43 AM	#19
LuckyHenriksen Registered User Join Date: Oct 2007 Location: Sherwood Oregon Posts: 1,908	Re: What year S-10 for door weatherstripping and seat belts? Anybody know about the seatbelts? __________________ 1968 Yenko Chevy LWB 6.0L/TH400 3/4 Drop Senior Project Build Thread Here

11-14-2008, 11:52 AM	#20
glock35ipsc Next project: 1970 K10 Join Date: Feb 2004 Location: Fort Collins, Colo 80524 Posts: 6,684	Re: What year S-10 for door weatherstripping and seat belts? I sent Wes an email asking about the Dakota weatherstriping. I'll keep looking for the S-10 seat belt option. __________________ *Bob* 1970 Chevy K10 LWB "Goldie" 350/TH350 *next project!!* 1981 Chevy C10 LWB 355/TH350 - My son's truck LS SWAP FORUM! Tons of LS swap info here! PLEASE CLICK HERE TO SUPPORT THE GREATEST BOARD ON THE NET! CLICK HERE FOR THE FAQ INDEX by KRUE

11-14-2008, 02:45 PM	#22
LuckyHenriksen Registered User Join Date: Oct 2007 Location: Sherwood Oregon Posts: 1,908	Re: What year S-10 for door weatherstripping and seat belts? Ok thanks Brad. Ill be cruising the local CL to see if I can find any. Do they just not fit between the gas tank and door? __________________ 1968 Yenko Chevy LWB 6.0L/TH400 3/4 Drop Senior Project Build Thread Here

11-14-2008, 02:49 PM	#23
Brad Out of the carpool lane. Join Date: Jan 2000 Location: Clark Co, WA Posts: 5,672	Re: What year S-10 for door weatherstripping and seat belts? You won't find them at all on CL. You need to go to the U-pull by your house. But on used belts, always take into consideration the condition of the vehicle and any major damage to it. You probably don't want belts that were in a major fender-bender. Otherwise if it just appears the vehicle is relatively fine, then you'll be ok. As you can see in the pic, a special adaptor plate was needed to offset the base from the tank. Even when they were in like you see, the belt didn't want to retract all the way and was kind of annoying. If you don't have the tank inside, then you can just literally bolt them in all the original holes and they work great! __________________ 1968 C-10 SWB, 5.7 Vortec/700R4/3.73 posi, Torch Red 1968 Camaro, 250/Powerglide, all original (No, I'm not gonna drop a 350 in it!...Jeez!) 2000 Honda VFR in the faster yellow! 2008 Husqvarna TE-610 1967 C-10 SWB 'Six Appeal'-Gone but not forgotten... Last edited by Brad; 11-14-2008 at 02:56 PM.

11-14-2008, 02:51 PM	#24
LuckyHenriksen Registered User Join Date: Oct 2007 Location: Sherwood Oregon Posts: 1,908	Re: What year S-10 for door weatherstripping and seat belts? Ok sweet I love a good junkyard scrounge. So look for mid 90's beater cars? Not S10's? __________________ 1968 Yenko Chevy LWB 6.0L/TH400 3/4 Drop Senior Project Build Thread Here

11-14-2008, 02:55 PM	#25
Brad Out of the carpool lane. Join Date: Jan 2000 Location: Clark Co, WA Posts: 5,672	Re: What year S-10 for door weatherstripping and seat belts? While any belt may work, we're talking about S-10 belts here. I'll go back and edit a bit more. __________________ 1968 C-10 SWB, 5.7 Vortec/700R4/3.73 posi, Torch Red 1968 Camaro, 250/Powerglide, all original (No, I'm not gonna drop a 350 in it!...Jeez!) 2000 Honda VFR in the faster yellow! 2008 Husqvarna TE-610 1967 C-10 SWB 'Six Appeal'-Gone but not forgotten... Last edited by Brad; 11-14-2008 at 02:56 PM.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.