![]() |
![]() |
#1 |
Registered User
Join Date: Nov 2008
Location: Columbia SC
Posts: 231
|
head light knob
72 chevy truck
How does the headlight knob come off I am taking dash off to clean and paint and can't figure out how to get the know off. I don't want to brake it. |
![]() |
![]() |
![]() |
#2 |
Registered User
Join Date: Feb 2005
Location: Carl Junction, Missouri
Posts: 2,061
|
Re: head light knob
reach behind it (that means stick your arm way up behind the dash), there's a tiny round button thing with a spring on it, it'll be on the top of the switch. push that in while pulling in and out out the knob and the whole rod comes out.
Last edited by matthufham; 11-22-2008 at 01:31 PM. |
![]() |
![]() |
![]() |
#3 |
Old member
Join Date: Jan 2002
Location: Liberty, & Garden City S.C. , U.S.
Posts: 19,936
|
Re: head light knob
You need to take the battery loose or take the wiring off the backside of the switch before doing this. If not the lights will stay on the whole time.
__________________
1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 ![]() Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs. |
![]() |
![]() |
![]() |
#4 |
Between Trucks...
Join Date: Mar 2002
Location: Los Angeles, CA.
Posts: 3,830
|
Re: head light knob
I found if you pull the knob out, then press the button on top it'll come out the rest of the way a lot easier.
__________________
Beat it to fit, Paint it to match... ![]() |
![]() |
![]() |
![]() |
#5 |
Registered User
Join Date: Nov 2008
Location: Columbia SC
Posts: 231
|
Re: head light knob
Thanks, I did not want to brake it!!
|
![]() |
![]() |
![]() |
#6 |
"THE GREEN GOBLIN"
Join Date: Mar 2008
Location: Fremont Ca.
Posts: 1,025
|
Re: head light knob
![]()
__________________
![]() "THE GREEN GOBLIN" 1972 Cheyenne 10 Short Fleet Side Front 2.5inch Spindles with 2inch Springs Rear 4inch drop Springs. 454BBC TH400,Posi 1971 Cheyenne 10 Long Fleet Side 454BBC TH350,Posi ![]() Drive it like you stole it! ![]() Petey-pablo@sbcglobal.net |
![]() |
![]() |
![]() |
#7 |
Registered User
Join Date: Nov 2007
Location: Sask Canada
Posts: 1,666
|
Re: head light knob
Andy: FYI. save your self 2 steps and leave the battery hooked up. use a screw driver about the same shaft size as the head light shaft and push the screwdriver in the hole till the lights shut off and remove the screwdriver. when your ready to go push in the light nobe all the way in and pull it out as normal for the lights to work . thats what i do.
__________________
Trueman Last edited by 463; 11-22-2008 at 06:31 PM. |
![]() |
![]() |
![]() |
#8 |
Registered User
![]() Join Date: Jul 2007
Location: Toppenish, WA
Posts: 15,518
|
Re: head light knob
That may just be the trick of the day 463. The only thing is that when most of us need to pull the knob out of the switch we also need to change the switch and it is a bit safer with the battery disconnected.
|
![]() |
![]() |
![]() |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|