|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
12-18-2008, 12:59 PM
|
#1 |
|
Registered User
 
Join Date: Apr 2000
Location: Bradenton, FL
Posts: 1,036
|
Didderent Alternator and HEI ?
Im running a 105 amp alternator with a 10 ga. charge wire. If I didn't want to use a fusible link what size fuse would I use. Same question for the HEI. What size fuse should I use for the power wire to the HEI.
__________________
1970 CST/10 402,700R4,3:73 posi,AC,PS,PB,TLT,PW,Buckets with heaters |
|
|
|
12-18-2008, 04:13 PM
|
#2 |
|
Registered User
Join Date: Feb 2002
Location: Vacaville, CA
Posts: 2,746
|
Re: Didderent Alternator and HEI ?
I know you don't want to use a fusible link but do it anyway. You will have to use too big a fuse to keep from blowing them out all the time and when you do have a problem (short etc.) you are more likely to burn something out than with a fusible link.
__________________
 70 C/10 Light Red 350/TH350, HEI, Duals w/40 series Flows, 91 seat, LED taillights 99 Pontiac S/C GTP, SLP Ram Air hood, GMPP Konis & springs 95 Neon ACR, MP PCM, AFX UDP, 3.0 CAI |
|
|
|
|
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
