|
12-20-2008, 11:14 AM
|
#1 |
|
Registered User
Join Date: Sep 2008
Location: Gainesville Ga
Posts: 210
|
69 cab sandblasting
What is a reasonable rate to have a 69 cab sandblasted and primed with epoxy? I the cab gutted and all undercoating scraped off. Thanks
|
|
|
|
12-20-2008, 12:06 PM
|
#2 |
|
I am a Referee of life.
Join Date: Jun 2000
Location: Greensboro N.C.
Posts: 13,993
|
Re: 69 cab sandblasting
Probably not much unless the blaster really knows what they are doing.Sandblasting really builds heat and can warp panels.If you have it blasted you really want to use a media.It will strip paint but may not get all the rust.IDK on the priming.
__________________
The 47-present Chevrolet and GMC Truck Message Board Network,it's owners,moderators,members,and associates of any type should not be held responsible for my opinion. You can't fix stupid,not even with duct tape. "My appearance is due to the fact that "GOD" does punish you for having too much fun!" Barrett-Jackson has perfected alchemy,they make rust into gold! "You can lead a horse to water but you can't saddle a duck" "Cleverly disguised as a 'Responsible Adult' "Sometimes your Knight in shining armor is just a retard in tinfoil" |
|
|
|
|
12-20-2008, 12:14 PM
|
#3 |
|
Registered User
Join Date: Sep 2008
Location: Houma LA
Posts: 193
|
Re: 69 cab sandblasting
Well i had the same question so i called the local media blaster and the only thing he could say was "bring it to me so i can see it" I guess to see how much work it would take??
__________________
1968 GMC Rebuilding Stage  2001 Camaro SS SOLD 
|
|
|
|
|
12-20-2008, 12:17 PM
|
#4 |
|
Registered User
 
Join Date: Feb 2004
Location: Idaho
Posts: 4,034
|
Re: 69 cab sandblasting
I have had a few quotes on media blasting (media being better on the metal then sand).
Between $125 to $300. I got an entire cab and chasis media blasted for $250 the last time that I had it done.
__________________
"Remember, They can Kill You, but they can't eat You, That's against the law!!!!!!!!!" |
|
|
|
|
12-20-2008, 12:49 PM
|
#5 |
|
Registered User
Join Date: Oct 2008
Location: oxnard ca
Posts: 2,201
|
Re: 69 cab sandblasting
69 cab blasted in ca, $400.00
cab being sealed runs $300.00. Make sure the blaster knows what he is doing they can warp the metal real bad with to much pressure. Justin www.scottshotrods.com |
|
|
|
|
12-20-2008, 02:07 PM
|
#6 |
|
Registered User
Join Date: Oct 2007
Location: greeneville tn
Posts: 237
|
Re: 69 cab sandblasting
I had a 51 chey done about three years ago and i had all the parts done except frame and bed and it was 700 dollars . I had stripped it down to the orrignal primer . Yes they need to know what they are doing ,check work they have done for others. The 70 and 68 trucks i have now i am going to h ave parts of them done that they cant warp.
|
|
|
|
|
12-20-2008, 06:23 PM
|
#7 | |
|
Registered User
Join Date: Dec 2007
Location: Santa Maria, Ca.
Posts: 1,423
|
Re: 69 cab sandblasting
Quote:
__________________
69 Chevy 4x4 383 Power 
|
|
|
|
|
 |
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
