from long to short! - The 1947 - Present Chevrolet & GMC Truck Message Board Network

the lights · 01-02-2009, 10:45 PM

No turning back now!

jmedero · 01-02-2009, 10:56 PM

MORE PICS!!! I am planning on doing this... and would LOVE more pics... any thing you can elaborate on would be awesome.

TimE · 01-02-2009, 11:05 PM

Keep us updated with plenty of pics. I intend to cut a bed down if I can't find a decent short bed local. Nice work.

1LoC10 · 01-02-2009, 11:06 PM

sweet

Alan's Classic · 01-03-2009, 01:12 AM

Nice work!!

the lights · 01-03-2009, 01:27 AM

Jmedero really the only thing hard about cutting the bed was making sure the lines were straight. the back half needs 8 inch taken out while the front needs 12". then be sure to line the body lines up and start tacking away.

the lights · 01-03-2009, 01:32 AM

thanks for the compliments alan, oneloc10, and time this site has inspired me
to get out in the cold and do it to it.

the lights · 01-03-2009, 01:39 AM

the frame was a bit harder I must admit, because i left the springs on and it raised the back half of the frame up but a jack took care of it. I welded it together, but still need to reinforce and box the frame. here is what it looks like now.

joe231 · 01-03-2009, 03:10 AM

nice, very nice!!
got pics of the frame work?

TimE · 01-03-2009, 09:12 AM

Nice work!

How long did all of this take you to perform?

**ChiefRocka** · 01-03-2009, 10:22 AM

Nice '63.....

Great work as well...I thought about shortening mine at one time, but that thought passed really quick !!

Good work.

willyp · 01-03-2009, 11:45 AM

what are you going to do for a bed floor?

502tripower · 01-03-2009, 02:16 PM

Very nice...

kizer · 01-03-2009, 04:35 PM

I remember seeing that done on trucks. They put a z cut in the frame just behind the cross member. I thought it was pretty cool when they did it.

the lights · 01-04-2009, 02:37 AM

to answer a few questions I do not really know what Im going to do about a bed floor. the whole shortening took two days, but I still have to do more welding on the frame when I finish that Ill post more pics. I also need to find a shorter driveline.
thanks for all the encouragement.

the lights · 01-09-2009, 08:43 PM

I installed the jeep tj springs and it lowered it quite a bit and only took an hour and a half.

compared to this

protrash64 · 01-09-2009, 09:23 PM

Nice work. Looks like leaving the bed on the frame held it well. I probably woulda pulled it off and had vibrating all over trying to cut it

.

So much for 'crumple zones'!!!!

shortbed70 · 01-09-2009, 09:26 PM

WOW BIG difference Looks good.

62 short step · 01-09-2009, 11:21 PM

What did you use to cut the bed? Looks awesome!

protrash64 · 01-10-2009, 12:56 AM

Quote:

Originally Posted by 62 short step

What did you use to cut the bed? Looks awesome!

I noticed a sawzall on the tailgate in the first pic.

the lights · 01-10-2009, 01:27 AM

thanks protrash64, and shortbed70, 62 short step for the compliments, I did use a sawzall for the finer cuts where the cut of wheel could not reach.

killthewabbit · 01-10-2009, 01:55 AM

Good job, sir!

Frizzle Fry · 01-10-2009, 07:12 AM

I like!

01-02-2009, 10:45 PM	#1
the lights Registered User Join Date: Dec 2008 Location: turlock CA Posts: 98	from long to short! No turning back now!

01-02-2009, 10:56 PM	#2
jmedero Registered User Join Date: Jun 2008 Location: pensacola fl Posts: 3,073	Re: from long to short! MORE PICS!!! I am planning on doing this... and would LOVE more pics... any thing you can elaborate on would be awesome.

01-02-2009, 11:05 PM	#3
TimE Hey Y'all!! Join Date: Dec 2007 Location: Bay Minette, Alabama Posts: 1,755	Re: from long to short! Keep us updated with plenty of pics. I intend to cut a bed down if I can't find a decent short bed local. Nice work.

01-02-2009, 11:06 PM	#4
1LoC10 Insert Title Here Join Date: Feb 2006 Location: Dyer, Indiana Posts: 5,679	Re: from long to short! sweet __________________ BOBBY _69 SWB_ 1000 pics of 67-72's>> http://s193.photobucket.com/albums/z...-72/?start=all <<

01-03-2009, 01:12 AM	#5
Alan's Classic 1 thing at a time is progress. Join Date: Jun 2007 Location: Ball Ground GA Posts: 5,511	Re: from long to short! Nice work!! __________________ Alan Philippians 2:14-16 Alan's Classic Facebook page. North Georgia Group Project 1965 Vitamin C-10 1995 GMC Sierra K1500 The "Wrecker"

01-03-2009, 01:27 AM	#6
the lights Registered User Join Date: Dec 2008 Location: turlock CA Posts: 98	Re: from long to short! Jmedero really the only thing hard about cutting the bed was making sure the lines were straight. the back half needs 8 inch taken out while the front needs 12". then be sure to line the body lines up and start tacking away.

01-03-2009, 01:32 AM	#7
the lights Registered User Join Date: Dec 2008 Location: turlock CA Posts: 98	Re: from long to short! thanks for the compliments alan, oneloc10, and time this site has inspired me to get out in the cold and do it to it.

01-03-2009, 01:39 AM	#8
the lights Registered User Join Date: Dec 2008 Location: turlock CA Posts: 98	Re: from long to short! the frame was a bit harder I must admit, because i left the springs on and it raised the back half of the frame up but a jack took care of it. I welded it together, but still need to reinforce and box the frame. here is what it looks like now.

01-03-2009, 03:10 AM	#9
joe231 Registered User Join Date: Dec 2007 Location: Palmer, Alaska Posts: 13,821	Re: from long to short! nice, very nice!! got pics of the frame work? __________________ *CHEVY ONLY*

01-03-2009, 09:12 AM	#10
TimE Hey Y'all!! Join Date: Dec 2007 Location: Bay Minette, Alabama Posts: 1,755	Re: from long to short! Nice work! How long did all of this take you to perform?

01-03-2009, 10:22 AM	#11
ChiefRocka Hollister, CA. Join Date: Sep 2006 Location: Hollister, Ca. Posts: 6,150	Re: from long to short! Nice '63..... Great work as well...I thought about shortening mine at one time, but that thought passed really quick !! Good work. __________________ John What the Heck is that ?? CURRENT BUILDS: 62 BurbMaster Other Builds: My '63 C-10,LWB,CC,BBW '06 HD StrAight Axle Swap Father/Son '67 C-20, LQ9,4L80,Bagged,8-Lugger !!Good Friend Richard's Build AMERICAN CUSTOMS & CLASSICS (831) 630-1965 www.ACCHOLLISTER.com ACC on FACEBOOK "Rest in Peace, Mom & Dad ... I will see you again someday!"

01-03-2009, 11:45 AM	#12
willyp Registered User Join Date: Nov 2008 Location: Houston TX Posts: 362	Re: from long to short! what are you going to do for a bed floor? __________________ The price of cool aint cheap.

01-03-2009, 02:16 PM	#13
502tripower Registered User Join Date: Jan 2008 Location: Satsop, WA Posts: 606	Re: from long to short! Very nice... __________________ 1963' Chev Custom Cab 502, 67' 435hp 3X2 intake, 9" 4:30 Posi 1961 Impala SS 348/350 4-speed 3:70 Posi 1961 Bel-Air Bubble Top 283 Turboglide soon to have a 348 3X2 4-speed 1950 17' Fairliner twin cockpit barrel stern 312 Y block 1X1 intake Borg Warner 1:1 gear 1957 Fleetform 14' twin cockpit barrel stern 1969 BP-125 Merc 1949 Transitier 3-wheel forklift Crosley 4-Banger 98' FXD 2002 2500HD

01-03-2009, 04:35 PM	#14
kizer Its Deja Vu time again Join Date: Aug 2008 Location: Marysville, North of Seattle WA Posts: 815	Re: from long to short! I remember seeing that done on trucks. They put a z cut in the frame just behind the cross member. I thought it was pretty cool when they did it. __________________ Its not pretty but its mine to figure out. The build / The Photos / Build Diary

01-04-2009, 02:37 AM	#15
the lights Registered User Join Date: Dec 2008 Location: turlock CA Posts: 98	Re: from long to short! to answer a few questions I do not really know what Im going to do about a bed floor. the whole shortening took two days, but I still have to do more welding on the frame when I finish that Ill post more pics. I also need to find a shorter driveline. thanks for all the encouragement.



Register or Log In To remove these advertisements.

01-09-2009, 08:43 PM	#16
the lights Registered User Join Date: Dec 2008 Location: turlock CA Posts: 98	Re: from long to short! I installed the jeep tj springs and it lowered it quite a bit and only took an hour and a half. compared to this

01-09-2009, 09:23 PM	#17
protrash64 Resistance is Futile Join Date: Dec 2006 Location: Mesa,Arizona Posts: 3,520	Re: from long to short! Nice work. Looks like leaving the bed on the frame held it well. I probably woulda pulled it off and had vibrating all over trying to cut it . So much for 'crumple zones'!!!! __________________ 64 CHEVY PICK-UP > http://67-72chevytrucks.com/vboard/s...otrash+re-hash 64 CARRYALL >http://67-72chevytrucks.com/vboard/s...=1964+suburban 66 LB >http://67-72chevytrucks.com/vboard/s...d.php?t=427852 STRENGTH/DETERMINATION/MERCILESS/FOREVER .......posted via stationary device

01-09-2009, 09:26 PM	#18
shortbed70 Registered User Join Date: Mar 2002 Location: Forney TX Posts: 4,512	Re: from long to short! WOW BIG difference Looks good. __________________ Troy 1965 Chevy Bagged,361 sbc,voodoo cam,1.5 full roller rockers,patriot 185cc vortec heads 2.02-1.60,vortec weiand polished intake,demon carb my truckhttp://67-72chevytrucks.com/vboard/s...d.php?t=332884 Big Red Dog build http://67-72chevytrucks.com/vboard/s...d.php?t=572274

01-09-2009, 11:21 PM	#19
62 short step Senior Member Join Date: Aug 2005 Location: Greenwell Springs, Louisiana Posts: 2,882	Re: from long to short! What did you use to cut the bed? Looks awesome! __________________ www.louisianaclassictruckclub.com 1965 c-10 86 chevy c/k 20

01-10-2009, 01:27 AM	#21
the lights Registered User Join Date: Dec 2008 Location: turlock CA Posts: 98	Re: from long to short! thanks protrash64, and shortbed70, 62 short step for the compliments, I did use a sawzall for the finer cuts where the cut of wheel could not reach.

01-10-2009, 01:55 AM	#22
killthewabbit Spear and magic helmet! Join Date: Oct 2006 Location: Nashville, TN Posts: 1,226	Re: from long to short! Good job, sir! __________________ -- Will

01-10-2009, 07:12 AM	#23
Frizzle Fry Registered User Join Date: Aug 2005 Location: Hillsboro Oregon Posts: 6,449	Re: from long to short! I like!

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.