I still do my part. Ebay tach dashes - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**crossy** · 01-03-2009, 06:18 PM

Well i've been out of the 73-87 loop for while now and still TRYING to get of stuff (parts) out of here , but i went through ebay the other day -FOR YOU GUYS-and emailed every guy mis-advertising the factory tachs. AND- just like the old days it is still only about 25% that email back and are grateful . the percentage may have went up a bit.35% ??? because I think sellers are more conscious of the new feedback system.
Since this is still a popular item i recommend you go see the info on Jeff Drews site( a member here also) . some of the info i contributed back then is a LITTLE off, but the basis of it is still on target.
Happy New year. May you all be healthy & prosper. :-) , L8r, crossy

crawdadfox · 01-03-2009, 07:11 PM

Uh....What the... umm..

PhilaTruck · 01-03-2009, 09:34 PM

CrawDad- Crossy's a tach dash guru and one of the earliest members of the board. I asked him about this post b/c he's had so much experience with these things.

Dave- thanks for tilling the windmills of eBuy. We gotta go junk yard shopping sometime this spring.

crossy's son · 01-03-2009, 09:59 PM

Quote:

Originally Posted by PhilaTruck

CrawDad- Crossy's a tach dash guru and one of the earliest members of the board. I asked him about this post b/c he's had so much experience with these things.

Dave- thanks for tilling the windmills of eBuy. We gotta go junk yard shopping sometime this spring.

I'm hoping you'll be hunting for some REAL mufflers this time?

the one guy even argued stating that he knew it was a 77 he pulled the AMP gauge equipped dash from. GUESS WHAT. I never bought a 73-80 that didn't have at least 5 things wrong(changed) in it over the years and i don't even want to mention how many re-cabbed and re-vin #'d trucks i've seen.
Chevys WERE hairy chested TRUCKS and the drivetrains back then lasted through 5 major re-do's of the body.
crossy
crossy

bigblock73 · 01-03-2009, 10:14 PM

Hey Dave, let me know what I need to change on the tach article...I'll be glad to do it.

Nice to see you around, hopefully you will keep tabs on us every now and again.

Happy new year friend.

PhilaTruck · 01-04-2009, 11:04 AM

Those headers haven't rusted through yet.

I'm planning to get a set from CptKaos w/ the Pypes RacePro muffs to go with my new 1.75 primary hedmans. Supposedly, the RacePros are quieter (and flow better) than the streets. So 'til then, my neighbors are praying for rain.

As far as boneyard picking- I'll PM you-

01-03-2009, 06:18 PM	#1
crossy Oh,you can't buy that new Join Date: Apr 2000 Location: Pennsville,N.J. 08070, USA Posts: 2,039	I still do my part. Ebay tach dashes Well i've been out of the 73-87 loop for while now and still TRYING to get of stuff (parts) out of here , but i went through ebay the other day -FOR YOU GUYS-and emailed every guy mis-advertising the factory tachs. AND- just like the old days it is still only about 25% that email back and are grateful . the percentage may have went up a bit.35% ??? because I think sellers are more conscious of the new feedback system. Since this is still a popular item i recommend you go see the info on Jeff Drews site( a member here also) . some of the info i contributed back then is a LITTLE off, but the basis of it is still on target. Happy New year. May you all be healthy & prosper. :-) , L8r, crossy __________________ "been there, done that, ruined the T-shirt". 2007 LBZ GMC Sierra, ECSB 2006 LM7 RCSB Silverado 98 Vortec project. 94,3500,6.5L 4L80 81 SWB GMC POS finally gone 73 Pinto, stock, w/CragarSS's-eww LOTS of Cummins trucks.

01-03-2009, 07:11 PM	#2
crawdadfox Registered User Join Date: Aug 2008 Location: New Orleans Louisiana.....a great place to visit but you wouldn't want to live here!!! Posts: 883	Re: I still do my part. Ebay tach dashes Uh....What the... umm..

01-03-2009, 09:34 PM	#3
PhilaTruck Right on the line, baby! Join Date: Oct 2003 Location: Phila, PA 19130 Posts: 1,486	Re: I still do my part. Ebay tach dashes CrawDad- Crossy's a tach dash guru and one of the earliest members of the board. I asked him about this post b/c he's had so much experience with these things. Dave- thanks for tilling the windmills of eBuy. We gotta go junk yard shopping sometime this spring. __________________ 83 GMC 406 th400/3.73 Eaton Truetrac posi, headers, x pipe, & racePros. Tubular control arms, lowering rear springs, caltracs. Still ugly, but getting built right, although slowly Click and scroll down for site vendors! Subscribe here!

01-03-2009, 10:14 PM	#5
bigblock73 yeller Join Date: Oct 2001 Location: Twin Cities Posts: 13,826	Re: I still do my part. Ebay tach dashes Hey Dave, let me know what I need to change on the tach article...I'll be glad to do it. Nice to see you around, hopefully you will keep tabs on us every now and again. Happy new year friend. __________________ Jeff 73-87.com 73-87.com Facebook page 73-87 cab corner 6x9 speaker brackets for sale 67-72 cab corner speaker brackets for sale 47-54 cab corner speaker brackets for sale

01-04-2009, 11:04 AM	#6
PhilaTruck Right on the line, baby! Join Date: Oct 2003 Location: Phila, PA 19130 Posts: 1,486	Re: I still do my part. Ebay tach dashes Those headers haven't rusted through yet. I'm planning to get a set from CptKaos w/ the Pypes RacePro muffs to go with my new 1.75 primary hedmans. Supposedly, the RacePros are quieter (and flow better) than the streets. So 'til then, my neighbors are praying for rain. As far as boneyard picking- I'll PM you- __________________ 83 GMC 406 th400/3.73 Eaton Truetrac posi, headers, x pipe, & racePros. Tubular control arms, lowering rear springs, caltracs. Still ugly, but getting built right, although slowly Click and scroll down for site vendors! Subscribe here!

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.