WTB Panel/Suburban-lower rear cross member - The 1947 - Present Chevrolet & GMC Truck Message Board Network

robb67 · 01-04-2009, 02:30 PM

Hi everyone,

I need the lower rear cross member where the Barn doors latch. I'm in the middle of some body work and discovered both ends of my part are severly rotten. I have a '68 Chevy Panel but i believe a 67-72 panel or burban "barn door" type cross member will work. I can try and post a picture of what I need if my description is lacking. Any help or advice is welcome as I am new to all this and may have over looked an obvious source.

Thanks,
Rob

**Classic Heartbeat** · 01-04-2009, 03:21 PM

I have one already removed from a Suburban. It is rust free and only has one small dent on the R/H side. Easy fix. $75.00 plus shipping. WES

robb67 · 01-04-2009, 09:30 PM

That's great Wes. I actually need the cross member piece that goes inside that part as well and probably need it more desperately. I believe it's welded in? It sticks out about 4'' either end and kind looks like angle iron with bolt holes (4) at the ends? I'm not sure about the bolt holes 'cause mine's rotten. If you have any ideas or that part as well I'd be appreciative. The part in your picture is better than mine so I'm interested in that regardless. I'll "pm" you or call your shop tomorrow and talk about shipping, which ever is easier for you.

Thanks, Rob.

p.s. my first wtb and..... success. gotta love this site!

01-04-2009, 02:30 PM	#1
robb67 Registered User Join Date: Aug 2008 Location: Brentwood Bay, BC Posts: 252	WTB Panel/Suburban-lower rear cross member Hi everyone, I need the lower rear cross member where the Barn doors latch. I'm in the middle of some body work and discovered both ends of my part are severly rotten. I have a '68 Chevy Panel but i believe a 67-72 panel or burban "barn door" type cross member will work. I can try and post a picture of what I need if my description is lacking. Any help or advice is welcome as I am new to all this and may have over looked an obvious source. Thanks, Rob

01-04-2009, 03:21 PM	#2
Classic Heartbeat Project Junkie! Fishing Poor!! Join Date: Dec 1999 Location: Olympia,Wa. 98512 Posts: 10,766	Re: WTB Panel/Suburban-lower rear cross member I have one already removed from a Suburban. It is rust free and only has one small dent on the R/H side. Easy fix. $75.00 plus shipping. WES Attached Images __________________ On-line catolog Classic Heartbeat Pickup Parts WEHEPP@comcast.net Call us Toll Free (888) 338-2502 Like Us on Facebook No appointment necessary. 72 BB Chevy Custom Deluxe / Custom Camper 67 I-6 (Soon to be 5.7 LS1) Panel 68 BB Chevy Short Bed 72 6.0 LQ9 Short Bed Chevy 4X4 Olympia's fastest growing truck parts supplier. Olympia's home for Wayward Chevys

01-04-2009, 09:30 PM	#3
robb67 Registered User Join Date: Aug 2008 Location: Brentwood Bay, BC Posts: 252	Re: WTB Panel/Suburban-lower rear cross member That's great Wes. I actually need the cross member piece that goes inside that part as well and probably need it more desperately. I believe it's welded in? It sticks out about 4'' either end and kind looks like angle iron with bolt holes (4) at the ends? I'm not sure about the bolt holes 'cause mine's rotten. If you have any ideas or that part as well I'd be appreciative. The part in your picture is better than mine so I'm interested in that regardless. I'll "pm" you or call your shop tomorrow and talk about shipping, which ever is easier for you. Thanks, Rob. p.s. my first wtb and..... success. gotta love this site!

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.