I need new shocks - The 1947 - Present Chevrolet & GMC Truck Message Board Network

camaney · 01-10-2009, 10:46 PM

Hi. I LOWER MY 67 GMC TODAY AND WHEN I GOT TO THE SHOCKS THEY WOULD NOT FIT BACK IN THERE RIGHT AND I THE NEED TRUCK TOMMOROW WE ARE GOING IN A TRIP I WAS WONDERING IF ANYBODY USE SHOCKS FROM DIFERENT VEHICLES? I HERAD THAT VOLVO MAY FIT BUT NOT SURE WITCH, IF NOT, IM GOING TO BE RIDING REAL SLOW GOING TO WORK AND BACK AND SKIP THE TRIP TOMOROW TILL I GET IT FROM GMCPAULS. THANKS

**special-K** · 01-10-2009, 11:17 PM

How much did you lower it?You tryed to use the same shocks that were on it before you lowered it?

camaney · 01-10-2009, 11:21 PM

6-4 the old shocks and are in the rear have coils and is really hard to compressem back

cdowns · 01-11-2009, 07:38 AM

for the rear you'll need to buy or fab a kit for relocating the shocks for proper angle of operation// if you take a ruler and measure what your measurements are a good parts guy should b able to give you a set that will work/// most vendors on the board have shocks for lowered trucks as well as the rear relocation kits//you shoul also get the adjustable panhard bar kit so you can center the rear axel

**lolife99** · 01-11-2009, 07:48 AM

You also might want to get a front end alignment before you do too much driving.

01-10-2009, 10:46 PM	#1
camaney Registered User Join Date: Feb 2008 Location: sacramento california Posts: 204	I need new shocks Hi. I LOWER MY 67 GMC TODAY AND WHEN I GOT TO THE SHOCKS THEY WOULD NOT FIT BACK IN THERE RIGHT AND I THE NEED TRUCK TOMMOROW WE ARE GOING IN A TRIP I WAS WONDERING IF ANYBODY USE SHOCKS FROM DIFERENT VEHICLES? I HERAD THAT VOLVO MAY FIT BUT NOT SURE WITCH, IF NOT, IM GOING TO BE RIDING REAL SLOW GOING TO WORK AND BACK AND SKIP THE TRIP TOMOROW TILL I GET IT FROM GMCPAULS. THANKS

01-10-2009, 11:17 PM	#2
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: I need new shocks How much did you lower it?You tryed to use the same shocks that were on it before you lowered it? __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

01-10-2009, 11:21 PM	#3
camaney Registered User Join Date: Feb 2008 Location: sacramento california Posts: 204	Re: I need new shocks 6-4 the old shocks and are in the rear have coils and is really hard to compressem back

01-11-2009, 07:38 AM	#4
cdowns Senior Member Join Date: Jan 2003 Location: daytonabeach Posts: 22,956	Re: I need new shocks for the rear you'll need to buy or fab a kit for relocating the shocks for proper angle of operation// if you take a ruler and measure what your measurements are a good parts guy should b able to give you a set that will work/// most vendors on the board have shocks for lowered trucks as well as the rear relocation kits//you shoul also get the adjustable panhard bar kit so you can center the rear axel __________________ 71c-10 350/2004r/4:11 lowered3/4 longbed/dead by hurricane MEANING OF DEATH::::: SOMEBODY ELSE GETS YOUR STUFF DONT BELIEVE EVERYTHING YOU THINK TAKE MY ADVISE;I DON'T USE IT ANYWAY

01-11-2009, 07:48 AM	#5
lolife99 67-72 parts collector,… Join Date: Nov 2002 Location: Mid-MO Posts: 22,700	Re: I need new shocks You also might want to get a front end alignment before you do too much driving. __________________ Keith Convert to disc brakes. http://67-72chevytrucks.com/vboard/s...d.php?t=444823

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.