Raised Crossmember-End of January Special!!! - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Thorbecke Bros. · 01-19-2009, 10:56 PM

For the rest of this month (January) I am doing this front end special for $1949.95. Normal price is $2195.95. Thats a savings of $246.00!! (Add $200.00 for powdercoat)

This special includes:
Raised Crossmember
Inner frame gussets
Upper bag brackets/control arm mounts
Rack & Pinion frame notches
Stainless tie rod connectors & hdwr
Engine mounts
Transmission Crossmember
Upper shock mounts
Monroe Sensatrac shocks
1.25" OD swaybar kit with mounting hardware
Upper & Lower TB Control Arms
Airlift Dominator D2600 airbags
All Grade 8 mounting hardware

*Spindles not included*

[IMG]http://www.*****************/jason/images/whole%20kitsmall.jpg[/IMG]

*project 67 sub* · 01-20-2009, 05:15 AM

thats a very nice looking piece. wish i had some money to spend. oh well maybe someday.

Coda O'Dell · 01-20-2009, 11:18 AM

IV. Pure trolling, either to upset someone or simply for your personal enjoyment, is strictly prohibited. If you're here to cause trouble, it will be a very short stay. Immediate BAN and you will be reported to your ISP.

swtnlw2005 · 01-20-2009, 12:48 PM

IV. Pure trolling, either to upset someone or simply for your personal enjoyment, is strictly prohibited. If you're here to cause trouble, it will be a very short stay. Immediate BAN and you will be reported to your ISP.

**scotts62** · 01-20-2009, 03:00 PM

Cool set up

lowhoe · 01-21-2009, 10:25 PM

This kit is a bad MOFO. I got my complete kit including arms a few weeks ago. Well worth the cash

**scotts62** · 01-21-2009, 10:27 PM

Quote:

Originally Posted by lowhoe

This kit is a bad MOFO. I got my complete kit including arms a few weeks ago. Well worth the cash

Cool man remember to post up some pics when you get it installed

Thorbecke Bros. · 01-22-2009, 12:09 AM

here are some pics of our newest raised crossmember. the only difference is the way the lower control arm mounts. it runs the same price as the other version and this one is on sale too! $1949.95 for the whole kit!

*spindles not included*

[IMG]http://www.*****************/jason/images/ccm8small.jpg[/IMG]

[IMG]http://www.*****************/jason/images/ccm11small.jpg[/IMG]

[IMG]http://www.*****************/jason/images/ccm12small.jpg[/IMG]

[IMG]http://www.*****************/jason/images/ccm13small.jpg[/IMG]

[IMG]http://www.*****************/jason/images/ccm14small.jpg[/IMG]

[IMG]http://www.*****************/jason/images/ccm15small.jpg[/IMG]

Scottshotrods · 01-22-2009, 12:42 AM

How much more would it be
with a
power rack
outer tierods
spindals
rotors
gm calipers
inner and outer bearings
seals and races
spindal nuts.
I see you offer s.s tierods with hime ends
with the kit.
How do feel this will handle
everyday driving?
I did call you guys and leave a mess on your shop
line.Never got a return call
probally busy understand.
I hoping you could answer
my post.

Conundrum · 01-22-2009, 07:35 AM

That's Sweet!

Rokcrln · 01-22-2009, 08:10 AM

So why did you change the design so soon after coming out with this?
Was their a problem with the lower mounts?

Kevin
LFD Inc.

Thorbecke Bros. · 01-22-2009, 08:21 AM

Quote:

Originally Posted by Rokcrln

So why did you change the design so soon after coming out with this?
Was their a problem with the lower mounts?

Kevin
LFD Inc.

no problem at all. we like to mix it up. there will be other versions as well.

Thorbecke Bros. · 01-22-2009, 03:21 PM

Quote:

Originally Posted by Scottshotrods

How much more would it be
with a
power rack
outer tierods
spindals
rotors
gm calipers
inner and outer bearings
seals and races
spindal nuts.
I see you offer s.s tierods with hime ends
with the kit.
How do feel this will handle
everyday driving?
I did call you guys and leave a mess on your shop
line.Never got a return call
probally busy understand.
I hoping you could answer
my post.

you can get a power rack off ebay for less than $200.00.

i got calipers, rotors, brake pads, bearing seals, inner & outer bearings and castle nuts from our local advance parts store for around $175.00, but you can always spend more just like with anything.

spindles vary from brand to brand, but a set of belltechs will cost around $300.00.

a "good quality" heim joint will perform great and last a long time.

n2billet · 01-22-2009, 08:06 PM

I think in a round about way he is trying to compare his front kit to yours and what comes "included" in one and not the other and the $$ difference..... I could be wrong but I think that's what he's trying to get across......

Quote:

Originally Posted by Thorbecke Bros.

you can get a power rack off ebay for less than $200.00.

i got calipers, rotors, brake pads, bearing seals, inner & outer bearings and castle nuts from our local advance parts store for around $175.00, but you can always spend more just like with anything.

spindles vary from brand to brand, but a set of belltechs will cost around $300.00.

a "good quality" heim joint will perform great and last a long time.

Thorbecke Bros. · 01-22-2009, 08:35 PM

Quote:

Originally Posted by n2billet

I think in a round about way he is trying to compare his front kit to yours and what comes "included" in one and not the other and the $$ difference..... I could be wrong but I think that's what he's trying to get across......

yeah, but i figured id answer anyways.

**N2TRUX** · 01-22-2009, 09:03 PM

Quote:

Originally Posted by Thorbecke Bros.

yeah, but i figured id answer anyways.

And I appreciate how professionally you handled it.

**scotts62** · 01-22-2009, 09:37 PM

Quote:

Originally Posted by N2TRUX

And I appreciate how professionally you handled it.

X2! shows a lot

*Shane* · 01-22-2009, 11:58 PM

Thank you for keeping it respectful Jason. Very very professional of you. Not sure I can honestly say i would have handled it as well.

Scottshotrods · 01-23-2009, 02:29 AM

Jason thankyou for your
response.
Justin

pcmcobra · 01-23-2009, 09:57 AM

sweet setup

Rigo's 70 C10 · 01-24-2009, 05:07 PM

Can this set up be used with a 6.0 & 4L60E out of a 2007 or 2008? Also, does this kit reposition the wheel centered on the wheel well? This is a solid looking piece!
Thanks,
Rigo

01-19-2009, 10:56 PM	#1
Thorbecke Bros. ***************** Join Date: Aug 2008 Location: Southern Indiana Posts: 172	Raised Crossmember-End of January Special!!! For the rest of this month (January) I am doing this front end special for $1949.95. Normal price is $2195.95. Thats a savings of $246.00!! (Add $200.00 for powdercoat) This special includes: Raised Crossmember Inner frame gussets Upper bag brackets/control arm mounts Rack & Pinion frame notches Stainless tie rod connectors & hdwr Engine mounts Transmission Crossmember Upper shock mounts Monroe Sensatrac shocks 1.25" OD swaybar kit with mounting hardware Upper & Lower TB Control Arms Airlift Dominator D2600 airbags All Grade 8 mounting hardware Spindles not included [IMG]http://www.*****************/jason/images/whole%20kitsmall.jpg[/IMG]

01-20-2009, 05:15 AM	#2
project 67 sub Account Suspended Join Date: Mar 2007 Location: san bernardino ca. everywhere Posts: 3,938	Re: End of January Special!!! thats a very nice looking piece. wish i had some money to spend. oh well maybe someday. Last edited by project 67 sub; 01-20-2009 at 05:15 AM.

01-20-2009, 11:18 AM	#3
Coda O'Dell Registered User Join Date: Mar 2008 Location: Sapulpa, Oklahoma Posts: 70	Re: Raised Crossmember-End of January Special!!! IV. Pure trolling, either to upset someone or simply for your personal enjoyment, is strictly prohibited. If you're here to cause trouble, it will be a very short stay. Immediate BAN and you will be reported to your ISP. Last edited by Shane; 01-21-2009 at 07:57 PM. Reason: Trolling will NOT be tolerated

01-20-2009, 12:48 PM	#4
swtnlw2005 Registered User Join Date: Feb 2007 Location: mustang,ok Posts: 26	Re: Raised Crossmember-End of January Special!!! IV. Pure trolling, either to upset someone or simply for your personal enjoyment, is strictly prohibited. If you're here to cause trouble, it will be a very short stay. Immediate BAN and you will be reported to your ISP. Last edited by Shane; 01-21-2009 at 07:58 PM. Reason: Trolling will NOT be tolerated.

01-20-2009, 03:00 PM	#5
scotts62 One day... Join Date: Apr 2008 Location: Tuttle, Ok Posts: 9,243	Re: Raised Crossmember-End of January Special!!! Cool set up __________________ Scott 93 crew cab build Project 62

01-21-2009, 10:25 PM	#6
lowhoe Registered User Join Date: Oct 2008 Location: lafayette, LA Posts: 69	Re: Raised Crossmember-End of January Special!!! This kit is a bad MOFO. I got my complete kit including arms a few weeks ago. Well worth the cash

01-22-2009, 12:09 AM	#8
Thorbecke Bros. ***************** Join Date: Aug 2008 Location: Southern Indiana Posts: 172	Re: Raised Crossmember-End of January Special!!! here are some pics of our newest raised crossmember. the only difference is the way the lower control arm mounts. it runs the same price as the other version and this one is on sale too! $1949.95 for the whole kit! spindles not included [IMG]http://www.***************/jason/images/ccm8small.jpg[/IMG] [IMG]http://www.*************/jason/images/ccm11small.jpg[/IMG] [IMG]http://www.*************/jason/images/ccm12small.jpg[/IMG] [IMG]http://www.*************/jason/images/ccm13small.jpg[/IMG] [IMG]http://www.*************/jason/images/ccm14small.jpg[/IMG] [IMG]http://www.***************/jason/images/ccm15small.jpg[/IMG]

01-22-2009, 12:42 AM	#9
Scottshotrods Registered User Join Date: Oct 2008 Location: oxnard ca Posts: 2,201	Re: Raised Crossmember-End of January Special!!! How much more would it be with a power rack outer tierods spindals rotors gm calipers inner and outer bearings seals and races spindal nuts. I see you offer s.s tierods with hime ends with the kit. How do feel this will handle everyday driving? I did call you guys and leave a mess on your shop line.Never got a return call probally busy understand. I hoping you could answer my post.

01-22-2009, 07:35 AM	#10
Conundrum Registered User Join Date: Oct 2008 Location: Parsons, KS Posts: 652	Re: Raised Crossmember-End of January Special!!! That's Sweet! __________________ 74 GMC SWB Project "Sin-thia" Static Dropped 8"f/10"r http://67-72chevytrucks.com/vboard/s...d.php?t=460030 97 GMC reg cab short bed, 4.3V6 / 5spd, daily driver 220,000 miles, all stock for now

01-22-2009, 08:10 AM	#11
Rokcrln Senior Member Join Date: Jul 2005 Location: Winters Ca. 95694 Posts: 4,843	Re: Raised Crossmember-End of January Special!!! So why did you change the design so soon after coming out with this? Was their a problem with the lower mounts? Kevin LFD Inc.

01-22-2009, 11:58 PM	#18
Shane Account Suspended Join Date: Jun 2000 Location: over yonder Posts: 14,270	Re: Raised Crossmember-End of January Special!!! Thank you for keeping it respectful Jason. Very very professional of you. Not sure I can honestly say i would have handled it as well.

01-23-2009, 02:29 AM	#19
Scottshotrods Registered User Join Date: Oct 2008 Location: oxnard ca Posts: 2,201	Re: Raised Crossmember-End of January Special!!! Jason thankyou for your response. Justin

01-23-2009, 09:57 AM	#20
pcmcobra Registered User Join Date: Aug 2006 Location: Florida Posts: 1,684	Re: Raised Crossmember-End of January Special!!! sweet setup __________________ 1986 C10 SWB 6.0/6l90e Miami...Flee it like a native

01-24-2009, 05:07 PM	#21
Rigo's 70 C10 Registered User Join Date: Dec 2007 Location: New Mexico Posts: 106	Re: Raised Crossmember-End of January Special!!! Can this set up be used with a 6.0 & 4L60E out of a 2007 or 2008? Also, does this kit reposition the wheel centered on the wheel well? This is a solid looking piece! Thanks, Rigo

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.