1972 Big Block Engine Parts for sale/trade - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**leddzepp** · 02-01-2009, 04:15 AM

1. A/C brackets, full 7 piece set. Cleaned and coated with POR-15. $250 Shipped to the lower 48.

2. 72 BBC Motor Mounts, Complete with clamshells, towers, motor mounts, hardware. Cleaned and coated with POR-15. I was going to re-use the metal casings on the motor mounts with polyurethane instead of rubber. $200 Shipped to the lower 48.

3. Heat shield for passenger side toe panel/floorboard, coated with POR-15. Includes mounting bolts. $25 Shipped to the lower 48.[/COLOR]

**leddzepp** · 02-01-2009, 04:18 AM

Pictures

**leddzepp** · 02-01-2009, 04:18 AM

One more

**leddzepp** · 02-02-2009, 05:24 PM

bump...offers?

Spray-Bomb · 02-02-2009, 07:56 PM

What about the actual engine ???

**leddzepp** · 02-02-2009, 08:11 PM

I sold the long block locally, but still have the original intake manifold, oil pan, and valve covers. They have all been cleaned and sprayed with POR 15 Chevy orange high temp engine paint and are ready to install. I can post pics if anyone is interested in them.

MarkMark · 02-02-2009, 08:29 PM

Im interested in the alternator brackets.

**leddzepp** · 02-02-2009, 08:37 PM

Quote:

Originally Posted by MarkMark

Im interested in the alternator brackets.

They are still available....

**leddzepp** · 02-09-2009, 11:45 AM

TTT...I picked up a tilt column locally, so the A/C brackets are now for sale as well.

My72BB · 02-09-2009, 12:23 PM

I'll take the timing cover...PM your payment information.

71 super · 02-09-2009, 04:07 PM

Scott I am interested in the intake. I will pm you. Harold

**leddzepp** · 02-10-2009, 03:30 PM

Intake sold to 71 Super, timing cover sold to My72BB. Thanks guys.

I am also looking for parts in trade...dealer added saddle tanks, 3/4 ton stainless hubcaps, factory tow hooks...

**Classic Bowties** · 02-10-2009, 04:34 PM

Quote:

Originally Posted by leddzepp

I am also looking for parts in trade...dealer added saddle tanks, 3/4 ton stainless hubcaps, LWB moulding, factory tow hooks...

factory tow hooks? ? ? which type are you after?

**leddzepp** · 02-10-2009, 04:45 PM

Hey Mel- I was going to try and find some 72 only tow hooks. I have heard that they would be correct for my 72 C-20.. I did not know they were an option on the 2 Wheel drive trucks too. I probably won't have any luck but thought I'd throw it out there and see. I would rather get the saddle tanks stainless hubcaps, and trim first. Thanks.

**leddzepp** · 02-16-2009, 04:04 PM

Power Steering, Pullies, Alternator brackets SOLD to MarkMark.

Feel free to make offers on the rest of the stuff...

**leddzepp** · 02-20-2009, 03:56 AM

Mark- I shipped today. PM sent.

The A/C brackets, motor mounts, and heat shield are all that is left. I am still looking for a tach dash in trade, or offers. Thanks.

**leddzepp** · 02-23-2009, 12:28 PM

bump

Livrat · 02-23-2009, 12:47 PM

Quote:

Originally Posted by leddzepp

Mark- I shipped today. PM sent.

The A/C brackets, motor mounts, and heat shield are all that is left. I am still looking for a tach dash in trade, or offers. Thanks.

I'll trade you a tach dash for your AC brackets and 72 motor mounts..

**leddzepp** · 02-25-2009, 02:45 PM

Quote:

Originally Posted by Livrat

I'll trade you a tach dash for your AC brackets and 72 motor mounts..

I will trade for either one....but not both

Livrat · 02-26-2009, 01:44 AM

Quote:

Originally Posted by leddzepp

I will trade for either one....but not both

Thanks for the reply.. I will have to pass...

**yote1234** · 02-27-2009, 03:39 PM

Quote:

Originally Posted by Spray-Bomb

What about the actual engine ???

hey spray bomb i've got a 72 402 dated & coded for a 72 truck.

**leddzepp** · 03-07-2009, 11:33 AM

Weekend bump...Prices Reduced

**leddzepp** · 03-18-2009, 03:33 AM

Ttt

**leddzepp** · 03-31-2009, 04:30 PM

Bump...still looking for a tach dash too!

**leddzepp** · 04-06-2009, 01:20 PM

ttt

02-01-2009, 04:15 AM	#1
leddzepp Moderator Join Date: May 2007 Location: Southern Cal Posts: 20,031	1972 Big Block Engine Parts for sale/trade 1. A/C brackets, full 7 piece set. Cleaned and coated with POR-15. $250 Shipped to the lower 48. 2. 72 BBC Motor Mounts, Complete with clamshells, towers, motor mounts, hardware. Cleaned and coated with POR-15. I was going to re-use the metal casings on the motor mounts with polyurethane instead of rubber. $200 Shipped to the lower 48. 3. Heat shield for passenger side toe panel/floorboard, coated with POR-15. Includes mounting bolts. $25 Shipped to the lower 48.[/COLOR] Last edited by leddzepp; 03-18-2009 at 03:33 AM.

02-01-2009, 04:18 AM	#2
leddzepp Moderator Join Date: May 2007 Location: Southern Cal Posts: 20,031	Re: 1972 Big Block Engine Parts for sale/trade Pictures Attached Images Last edited by leddzepp; 02-17-2009 at 11:52 AM.

02-01-2009, 04:18 AM	#3
leddzepp Moderator Join Date: May 2007 Location: Southern Cal Posts: 20,031	Re: 1972 Big Block Engine Parts for sale/trade One more Attached Images

02-02-2009, 05:24 PM	#4
leddzepp Moderator Join Date: May 2007 Location: Southern Cal Posts: 20,031	Re: 1972 Big Block Engine Parts for sale/trade bump...offers? Last edited by leddzepp; 02-02-2009 at 05:37 PM.

02-02-2009, 07:56 PM	#5
Spray-Bomb Texas Big Wig Join Date: Jan 2007 Location: Mineola, Texas Posts: 5,620	Re: 1972 Big Block Engine Parts for sale/trade What about the actual engine ??? __________________ Just not low enough... ----------------------------- Sinister Killer

02-02-2009, 08:11 PM	#6
leddzepp Moderator Join Date: May 2007 Location: Southern Cal Posts: 20,031	Re: 1972 Big Block Engine Parts for sale/trade I sold the long block locally, but still have the original intake manifold, oil pan, and valve covers. They have all been cleaned and sprayed with POR 15 Chevy orange high temp engine paint and are ready to install. I can post pics if anyone is interested in them.

02-02-2009, 08:29 PM	#7
MarkMark Registered User Join Date: Oct 2008 Location: Richmond Hill, GA Posts: 82	Re: 1972 Big Block Engine Parts for sale/trade Im interested in the alternator brackets.

02-09-2009, 11:45 AM	#9
leddzepp Moderator Join Date: May 2007 Location: Southern Cal Posts: 20,031	Re: 1972 Big Block Engine Parts for sale/trade TTT...I picked up a tilt column locally, so the A/C brackets are now for sale as well.

02-09-2009, 12:23 PM	#10
My72BB Registered User Join Date: Oct 2007 Location: Fairfield, PA Posts: 503	Re: 1972 Big Block Engine Parts for sale/trade I'll take the timing cover...PM your payment information.

02-09-2009, 04:07 PM	#11
71 super Registered User Join Date: Sep 2005 Location: Canton North carolina Posts: 3,080	Re: 1972 Big Block Engine Parts for sale/trade Scott I am interested in the intake. I will pm you. Harold __________________ 67 blue step side- bb 68 gold and white swb cst anniversary 68 custom swb hot rod Ls swap 69 swb cst 6 cylinder/ overdrive 69 black/black cst bb swb 70 orange and white cst Canada built truck swb bb 71 black and white super swb bb 71 red and white super swb 72 green and white super swb 4x4 62 nova wagon 400 series Ls swapped 68 Camaro 327/4 speed- 1 owner, original paint 66 Volkswagen bettle 69 auto stick Volkswagen Beetle

02-10-2009, 03:30 PM	#12
leddzepp Moderator Join Date: May 2007 Location: Southern Cal Posts: 20,031	Re: 1972 Big Block Engine Parts for sale/trade Intake sold to 71 Super, timing cover sold to My72BB. Thanks guys. I am also looking for parts in trade...dealer added saddle tanks, 3/4 ton stainless hubcaps, factory tow hooks... Last edited by leddzepp; 02-20-2009 at 03:51 AM.

02-10-2009, 04:45 PM	#14
leddzepp Moderator Join Date: May 2007 Location: Southern Cal Posts: 20,031	Re: 1972 Big Block Engine Parts for sale/trade Hey Mel- I was going to try and find some 72 only tow hooks. I have heard that they would be correct for my 72 C-20.. I did not know they were an option on the 2 Wheel drive trucks too. I probably won't have any luck but thought I'd throw it out there and see. I would rather get the saddle tanks stainless hubcaps, and trim first. Thanks.

02-16-2009, 04:04 PM	#15
leddzepp Moderator Join Date: May 2007 Location: Southern Cal Posts: 20,031	Re: 1972 Big Block Engine Parts for sale/trade Power Steering, Pullies, Alternator brackets SOLD to MarkMark. Feel free to make offers on the rest of the stuff...

02-20-2009, 03:56 AM	#16
leddzepp Moderator Join Date: May 2007 Location: Southern Cal Posts: 20,031	Re: 1972 Big Block Engine Parts for sale/trade Mark- I shipped today. PM sent. The A/C brackets, motor mounts, and heat shield are all that is left. I am still looking for a tach dash in trade, or offers. Thanks.

02-23-2009, 12:28 PM	#17
leddzepp Moderator Join Date: May 2007 Location: Southern Cal Posts: 20,031	Re: 1972 Big Block Engine Parts for sale/trade bump



Register or Log In To remove these advertisements.

03-07-2009, 11:33 AM	#22
leddzepp Moderator Join Date: May 2007 Location: Southern Cal Posts: 20,031	Re: 1972 Big Block Engine Parts for sale/trade Weekend bump...Prices Reduced

03-18-2009, 03:33 AM	#23
leddzepp Moderator Join Date: May 2007 Location: Southern Cal Posts: 20,031	Re: 1972 Big Block Engine Parts for sale/trade Ttt

03-31-2009, 04:30 PM	#24
leddzepp Moderator Join Date: May 2007 Location: Southern Cal Posts: 20,031	Re: 1972 Big Block Engine Parts for sale/trade Bump...still looking for a tach dash too!

04-06-2009, 01:20 PM	#25
leddzepp Moderator Join Date: May 2007 Location: Southern Cal Posts: 20,031	Re: 1972 Big Block Engine Parts for sale/trade ttt

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.